Yamaha 01V96i Reference Manual - Page 103
Assigning Scenes to Program Changes for Remote Recall, Turn on the PROGRAM CHANGE Tx ON/OFF
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
MIDI Assigning Scenes to Program Changes for Remote Recall 103 Assigning Scenes to Program Changes for Remote Recall You can assign 01V96i Scenes to MIDI Program Changes for remote recall. When you recall a Scene on the 01V96i, the unit transmits the assigned Program Change to the connected MIDI device. When the 01V96i receives a Program Change, the assigned Scene is recalled. Initially, Scenes 1 through 99 are assigned sequentially to Program Changes 1 through 99, and Scene #0 is assigned to Program Change #100, although you can change these assignments. Tip: You can store a Scene to Program Change assignment table to an external device by using MIDI Bulk Dump or the Studio Manager software. 1. Press the DISPLAY ACCESS [DIO/SETUP] but- ton repeatedly until the DIO/Setup | MIDI/Host page appears, then specify ports for transmission and reception of MIDI messages (see page 101). 2. Make connections using the ports selected in Step 1 so that the 01V96i can transfer MIDI messages to and from the external device. 3. Press the DISPLAY ACCESS [MIDI] button, then press the [F2] button. The MIDI | Pgm Asgn page appears. 5. Press the cursor button [ ] to move the cur- sor to a parameter box in the SCENE NO./TITLE column, then rotate the Parameter wheel or press the [INC]/[DEC] buttons to select Scenes. Tip: • If you assign a Scene to multiple Program Changes, the Program Change with the lowest number becomes effective. • You can initialize the Scene to Program Change assignment table by moving the cursor to the INITIALIZE button, then pressing [ENTER]. 6. Press the DISPLAY ACCESS [MIDI] button, then press the [F1] button to display the MIDI | Setup page, then specify the MIDI Transmit and Receive Channels. 7. Turn on the PROGRAM CHANGE Tx ON/OFF and Rx ON/OFF buttons. Now, when the 01V96i receives the Program Changes on the specified MIDI Channels, the corresponding Scenes are recalled. Also, when you switch Scenes on the 01V96i, the 01V96i transmits the Program Changes on the specified MIDI Channels. 4. Move the cursor to a parameter box in the PGM CHG column, and rotate the Parameter wheel or press the [INC]/[DEC] buttons to select the Program Change numbers to which you want to assign Scenes. 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/103.png)