Yamaha 01V96i Reference Manual - Page 92

92

Remote Control

01V96i—Reference Manual

6.

Move the cursor to a parameter control, then

rotate the Parameter wheel or press the

[ENTER] button to adjust the value.

One or two parameters are assigned to a single parameter

control. To turn the parameter setting on or off, press

[ENTER]. To modify the parameter variable, rotate the

Parameter wheel.

7.

When you finish adjusting the parameters,

move the cursor to the INSERT/PARAM but-

ton, then press [ENTER] to switch it to INSERT.

Bypassing Plug-ins

You can bypass plug-ins assigned to Pro Tools channels.

Before bypassing plug-ins, you must press the corresponding

[SEL] button to select a channel to which the plug-ins have

been assigned, then press the [F2] button to select Insert Dis-

play mode.

To bypass plug-ins, display the parameters of the plug-in you

wish to bypass in the INSERT ASSIGN/EDIT section, then

turn on the BYPASS button.

Scrub & Shuttle

By assigning the

DAW SCRUB

parameter to one of the User

Defined buttons [1]–[8], you can scrub Pro Tools tracks back

and forth by turning the Parameter wheel. By assigning the

DAW SHUTTLE

parameter to one of the User Defined but-

tons [1]–[8], you can shuttle back and forth by turning the

Parameter wheel.

1.

Assign the DAW SCRUB or DAW SHUTTLE

parameter to one of the User Defined buttons

[1]–[8].

Before assigning parameters to these buttons, you must

switch layers to cancel the Remote function. For more

information on assigning the user defined keys, refer to

“Using the User Defined Keys” in the Owner’s Manual

(separate booklet).

2.

Press the LAYER [REMOTE] button to enable

remote control of Pro Tools.

3.

Make sure that Pro Tools is stopped.

4.

Press the User Defined button to which you

assigned the DAW SCRUB or DAW SHUTTLE

parameter in Step 1.

You can now use the Scrub or Shuttle function.

5.

Rotate the Parameter wheel.

Rotate the Parameter wheel clockwise to scrub or shuttle

forwards. Turn it counterclockwise to scrub or shuttle

backwards.

The minimum scrub playback step varies depending on

the zoom setting in the Pro Tools Edit window.

6.

To cancel the Scrub or Shuttle function, press

the User Defined button or DAW SHUTTLE to

which you assigned the DAW SCRUB param-

eter in Step 1.

Alternatively, you can cancel the Scrub or Shuttle func-

tion by pressing the User Defined button to which the

DAW STOP parameter is assigned. The Scrub function is

automatically cancelled if you commence playback or fast

forward.

Note:

The Scrub/Shuttle operation might be stopped unex-

pectedly by Pro Tools. Therefore, whenever you use the Scrub

or Shuttle function, make sure that the P.WHEEL MODE

parameter indicates “SCRUB” or “SHUTTLE.” You can check

the Scrub/Shuttle function status by viewing the correspond-

ing User Defined button indicator.

Section	Page
How to Use This Reference Manual	1
Contents	2
Contents of the Owner’s Manual (Booklet)	3
Function Tree	4
Control Surface & Rear Panel	6
Control Surface	6
Rear Panel	10
Analog I/O & Digital I/O	12
Analog Inputs & Outputs	12
Digital Inputs & Outputs	13
Converting Sampling Rates of Signals Received at I/O Card Inputs	14
Monitoring Digital Input Channel Status	14
Dithering Digital Outputs	15
Setting the Transfer Format for Higher Sampling Rates	16
Input Channels	17
About Input Channels	17
Setting the Input Channels from the Display	18
Setting the Input Channels from the Control Surface	25
Pairing Input Channels	26
Naming Input Channels	28
Bus Outs	29
About Stereo Out	29
Bus Out 1–8	29
Setting the Stereo Out and Bus Out 1–8 from the Display	30
Setting the Stereo Out and Bus Out 1–8 from the Control Surface	33
Pairing Buses or Aux Sends	33
Attenuating Output Signals	34
Naming the Stereo Out and Bus Outs	35
Aux Outs	36
Aux Out 1–8	36
Setting Aux Out 1–8 from the Display	36
Setting Aux Out 1–8 from the Control Surface	38
Setting Aux Send Levels	38
Viewing Aux Send Settings for Multiple Channels	40
Panning Aux Sends	41
Copying Channel Fader Positions to Aux Sends	42
Input & Output Patching	43
Input Patching	43
Output Patching	44
Patching Direct Outs	46
Insert Patching	47
Monitoring	49
Monitor	49
Monitor and Solo Setup	49
Using the Monitor	50
Using the Solo Function	51
Surround Pan	52
About Surround Pan	52
Setting Up and Selecting Surround Pan Modes	53
Surround Panning	56
Grouping Channels & Linking Parameters	59
Grouping & Linking	59
Using Fader Groups and Mute Groups	59
Using Fader Group Master	61
Using Mute Group Master	62
Linking EQ and Compressor Parameters	62
Internal Effects	64
About the Internal Effects	64
Using Effects Processors via Aux Sends	64
Inserting the Internal Effects into Channels	65
Editing Effects	66
About Add-On Effects	67
About Plug-Ins	67
Scene Memories	68
About Scene Memories	68
What is Stored in a Scene?	68
About Scene Numbers	68
Storing and Recalling Scenes	69
Auto Scene Memory Update	70
Fading Scenes	71
Recalling Scenes Safely	72
Sorting Scenes	72
Copying and Pasting a Scene (Global Paste)	73
Libraries	74
About the Libraries	74
General Library Operation	74
Using Libraries	75
Remote Control	83
About Remote Function	83
Pro Tools Remote Layer	83
Nuendo/Cubase Remote Layer	93
Other DAW Remote Layer	94
MIDI Remote Layer	94
Machine Control Function	98
MIDI	100
MIDI & the 01V96i	100
MIDI Port Setup	101
Assigning Scenes to Program Changes for Remote Recall	103
Assigning Parameters to Control Changes for Real-time Control	104
Controlling Parameters by Using Parameter Changes	106
Transmitting Parameter Settings via MIDI (Bulk Dump)	107
Other Functions	109
Setting Preferences	109
Creating a Custom Layer by Combining Channels (User Assignable Layer)	110
Cascading Consoles	111
Checking the Battery and the System Version	113
Calibrating the Faders	113
Index	115
Appendix: Parameter Lists	119
USER DEFINED KEYS	119
USER DEFINED KEYS Initial Assignments	121
Input Patch Parameters	121
Initial Input Patch Settings	123
Output Patch Parameters	125
Initial Output Patch Settings	127
User Defined Remote Layer Initial Bank Settings	128
Effects Parameters	132
Effects and tempo synchronization	146
Preset EQ Parameters	147
Preset Gate Parameters (fs = 44.1 kHz)	148
Preset Compressor Parameters (fs = 44.1 kHz)	149
Dynamics Parameters	151
Appendix: MIDI	156
Scene Memory to Program Change Table	156
Initial Parameter to Control Change Table	157
MIDI Data Format	173

Yamaha 01V96i Reference Manual - Page 92

Bypassing Plug-ins, Scrub & Shuttle, Assign the DAW SCRUB or DAW SHUTTLE

Page 92 highlights