Yamaha 01V96i Reference Manual - Page 110
Creating a Custom Layer by Combining Channels (User Assignable Layer), Prefer2
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
110 Other Functions • Routing ST Pair Link When this check box is checked, paired channels' routing to the Stereo Bus will be linked. Prefer2 page The Prefer2 page enables you to name the channel indicated on the display, and adjust the display brightness. 1 2 3 Creating a Custom Layer by Combining Channels (User Assignable Layer) If you set the Remote Layer target to "USER ASSIGNABLE," you can create a custom layer by combining any 01V96i channels (excluding the Stereo Out). This custom layer is called "User Assignable layer." 1. Press the DISPLAY ACCESS [DIO/SETUP] but- ton repeatedly until the DIO/Setup| Remote page appears. 2. Set the TARGET parameter to USER ASSIGN- ABLE, then press [ENTER]. A confirmation window appears. 3. Move the cursor to the YES button, then press [ENTER]. The 01V96i displays the page shown below. This page contains the following parameters: 1 Channel ID/Channel This parameter selects a style for the displayed channel. If the Channel ID check box is selected, the Channel ID appears (e.g., CH1, CH16, AUX1). If the Channel Short Name check box is on, the Channel Short name appears. 2 Channel Copy Parameter This parameter selects the channel parameters to be copied when you assign the Channel Copy function to one of the User Defined buttons. You can select multiple options. • ALL This button selects all parameters that can be copied. When you turn on this button, all other options are cancelled. • FADER Copies the fader values. • ON Copies the on/off status of the [ON] buttons. • PAN Copies the pan settings. • SURR Copies the surround pan settings. • AUX Copies the Aux Send levels. • AUX ON Copies the on/off status of the Chan- nel to Aux signals. • EQ Copies the EQ parameter values. 3 Display Brightness This parameter sets the brightness of the LED indicators in the range of 1 through 4. 1 4. Select the channels you wish to assign to the User Assignable layer using the 1-16 param- eter boxes (1). You can store up to four 16-channel setups in four banks by switching Banks 1-4 via the BANK 1-4 buttons. If you press[ENTER] before selecting the channels to assign, you will still be able to select the channels you wish to assign in the User CH Select window. Tip: You can reset the assignment to default by moving the cursor to the CLEAR button and pressing [ENTER]. 5. Use the LAYER [REMOTE] button to assign or recall the User Assignable layer. You can use the faders and [ON] buttons to control the assigned channels. 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/110.png)