Yamaha 01V96i Reference Manual - Page 101
MIDI Port Setup, Selecting a Port for MIDI, Message Transfer
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
MIDI MIDI Port Setup 101 MIDI Port Setup Selecting a Port for MIDI Message Transfer To configure MIDI ports for MIDI message transfer, press the DISPLAY ACCESS [DIO/SETUP] button repeatedly until the DIO/Setup | MIDI/Host page appears. This page enables you to set MIDI message input and output. 1 4 2 3 The following parameters are available on this page: 1 GENERAL section This section enables you to select ports that transmit and receive MIDI messages, such as Program Changes and Control Changes. • Rx PORT This parameter specifies a port for general MIDI data reception. In the left parameter box, select MIDI, USB, or SLOT. If you select USB or SLOT, specify the port number (1-8) in the right parameter box. • Tx PORT This parameter specifies a port for general MIDI data transmission. The available ports are the same as for the Rx PORT parameter. 2 MIDI THRU section These parameters enable you to route incoming MIDI data from one port or slot to another without changes. Select a port for reception in the first parameter box, and select a port for transmission in the next parameter box (located to the right of the arrow). If you select USB or SLOT, specify the port number in the small parameter box adjacent to the port parameter box. 3 MACHINE CONTROL section This section enables you to select a remote control method and a remote control port to control external devices that support MMC. • PORT Select MIDI, USB, or SLOT for MMC command transfer. If you select USB or SLOT, specify the port number in the right parameter box. • DEVICE ID Specify the 01V96i's MMC Device ID. MMC Device IDs identify connected devices, enabling recognition during MMC transmission and reception. 4 SPECIAL FUNCTIONS section This section enables you to specify ports for various special functions. • Studio Manager In the left parameter box, select MIDI, USB or SLOT as the port used by the included Studio Manager software. In the two small parameter boxes on the right, specify a port number (if you selected USB), and an ID number. • DAW Select USB or SLOT as a port for use with a DAW. Specify in the right parameter box a port number pair (1-2, 3-4, 5-6, 7-8). • REMOTE This parameter indicates the target currently selected for Remote Layer. If the target is set to "USER DEFINED," you can select a MIDI message destination port. • CASCADE LINK This parameter determines whether MIDI messages are transmitted between two cascaded 01V96is. If you select MIDI, MIDI messages will be transferred between two cascaded units. If you select "-," no MIDI messages are transferred. The TRANSMIT and REQUEST buttons are used to synchronize all parameters that are cascade-linked. The TRANSMIT button synchronizes the connected 01V96i's parameters to your primary 01V96i's parameters. The REQUEST button synchronizes your 01V96i parameters to the connected 01V96i's parameters. 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/101.png)