Yamaha 01V96i Reference Manual - Page 91
Editing Plug-ins, In the INSERT ASSIGN/EDIT move
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Remote Control Pro Tools Remote Layer 91 If the PARAM button is selected instead, move the cursor to the button, then press [ENTER] to select INSERT. 2 1 5. Move the cursor to the ASSIGN button (2), then press [ENTER] to turn on the button. You can now select plug-ins. If you press another channel's [SEL] button after you turn on the ASSIGN button, the button turns off. If you wish to assign plug-ins to other channels, turn on the ASSIGN button again. 6. Move the cursor to one of the four parameter controls, then rotate the Parameter wheel to select a plug-in. By default, the parameter controls enable you to select plug-ins to be assigned to channel inserts #1-#4. To assign a plug-in to insert #5, press the Tab Scroll button [ ] to change the indication in the INSERT ASSIGN/EDIT section. If you are using the TDM system, you can also assign outboard effects processors. Editing Plug-ins You can edit plug-ins inserted in the channel strips as follows: 1. Press the [F2] button to select Insert Display mode. 2. Press the corresponding [SEL] button to select the channel that was assigned the plug-in you want to edit. 3. In the INSERT ASSIGN/EDIT section, move the cursor to the parameter control (Insert 1-4) that was assigned the parameter you want to edit. Note: To adjust a plug-in assigned to insert #5, press the Tab Scroll button [ ] to change the parameter indication in the INSERT ASSIGN/EDIT section, then select a parameter control. 4. Press [ENTER] to display the parameters. In the INSERT ASSIGN/EDIT section, the PARAM button is automatically selected and the Information box indicates the selected plug-in parameters. You can now use parameter controls 1-4 and the [ENTER] button to adjust the parameters. 7. Press [ENTER] to confirm the assignment. Repeat Steps 6 and 7 to assign more plug-ins to other insert positions in the channel strip. 8. In the same way, assign plug-ins to other channels. 9. When you finish assigning plug-ins, press the [AUX 8] button. The button indicator turns off. 5. Use the Tab Scroll buttons to display the parameter value you wish to change. Most plug-ins feature five or more parameters. To edit the fifth or subsequent parameters, use the Tab Scroll buttons to display the desired parameters and their values in the INSERT ASSIGN/EDIT section. The current page number and the plug-in name appear for a moment immediately after you press the Tab Scroll buttons. 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/91.png)