Yamaha 01V96i Reference Manual - Page 136
Rotary, Ring Mod., Mod. Filter, Distortion, Amp Simulate, Dyna. Filter, Dyna. Flange, One Input
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
136 Appendix: Parameter Lists ROTARY One input, two output rotary speaker simulator. Parameter Range ROTATE STOP, START SPEED SLOW, FAST SLOW FAST DRIVE ACCEL LOW HIGH 0.05-10.00 Hz 0.05-10.00 Hz 0-100 0-10 0-100 0-100 Description Rotation stop, start Rotation speed (see SLOW and FAST parameters) SLOW rotation speed FAST rotation speed Overdrive level Acceleration at speed changes Low-frequency filter High-frequency filter RING MOD. Two input, two output ring modulator. Parameter Range SOURCE OSC, SELF OSC FREQ 0.0-5000.0 Hz FM FREQ. 0.05-40.00 Hz FM DEPTH 0-100% SYNC OFF, ON NOTE FM 1 Description Modulation source: oscillator or input signal Oscillator frequency Oscillator frequency modulation speed Oscillator frequency modulation depth Tempo parameter sync on/off Used in conjunction with TEMPO to determine FM FREQ. 1. MOD. FILTER Two input, two output modulation filter. Parameter Range FREQ. 0.05-40.00 Hz DEPTH 0-100% PHASE 0.00-354.38 degrees TYPE OFFSET RESO. LEVEL SYNC NOTE LPF, HPF, BPF 0-100 0-20 0-100 OFF, ON 1 Description Modulation speed Modulation depth Left-channel modulation and right-channel modulation phase difference Filter type: low pass, high pass, band pass Filter frequency offset Filter resonance Output level Tempo parameter sync on/off Used in conjunction with TEMPO to determine FREQ. 1. DISTORTION One input, two output distortion effect. Parameter Range DST TYPE DST1, DST2, OVD1, OVD2, CRUNCH DRIVE 0-100 MASTER 0-100 TONE -10 to +10 N. GATE 0-20 Description Distortion type (DST = distortion, OVD = overdrive) Distortion drive Master volume Tone Noise reduction AMP SIMULATE One input, two output guitar amp simulator. Parameter Range AMP TYPE 1 DST TYPE DST1, DST2, OVD1, OVD2, CRUNCH DRIVE 0-100 MASTER 0-100 BASS 0-100 MIDDLE 0-100 TREBLE 0-100 CAB DEP 0-100% EQ F EQ G EQ Q N. GATE 100-8.00 kHz -12.0 to +12.0 dB 10.0-0.10 0-20 Description Guitar amp simulation type Distortion type (DST = distortion, OVD = overdrive) Distortion drive Master volume Bass tone control Middle tone control High tone control Speaker cabinet simulation depth Parametric equalizer frequency Parametric equalizer gain Parametric equalizer bandwidth Noise reduction 1. STK-M1, STK-M2, THRASH, MIDBST, CMB-PG, CMB-VR, CMB-DX, CMB-TW, MINI, FLAT DYNA. FILTER Two input, two output dynamically controlled filter. Parameter Range SOURCE INPUT, MIDI SENSE 0-100 DIR. UP, DOWN DECAY TYPE OFFSET RESO. LEVEL 1 LPF, HPF, BPF 0-100 0-20 0-100 Description Control source: input signal or MIDI Note On velocity Sensitivity Upward or downward frequency change Filter frequency change decay speed Filter type Filter frequency offset Filter resonance Output Level 1. 6 ms-46.0 s (fs=44.1 kHz), 5 ms-42.3 s (fs=48 kHz), 3 ms-23.0 s (fs=88.2 kHz), 3 ms-21.1 s (fs=96 kHz) DYNA. FLANGE Two input, two output dynamically controlled flanger. Parameter Range SOURCE INPUT, MIDI SENSE 0-100 DIR. UP, DOWN DECAY OFFSET 1 0-100 FB.GAIN -99 to +99% LSH F LSH G EQ F EQ G EQ Q HSH F HSH G 21.2 Hz-8.00 kHz -12.0 to +12.0 dB 100 Hz-8.00 kHz -12.0 to +12.0 dB 10.0-0.10 50.0 Hz-16.0 kHz -12.0 to +12.0 dB Description Control source: input signal or MIDI Note On velocity Sensitivity Upward or downward frequency change Decay speed Delay time offset Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Low shelving filter frequency Low shelving filter gain EQ (peaking type) frequency EQ (peaking type) gain EQ (peaking type) bandwidth High shelving filter frequency High shelving filter gain 1. 6 ms-46.0 s (fs=44.1 kHz), 5 ms-42.3 s (fs=48 kHz), 3 ms-23.0 s (fs=88.2 kHz), 3 ms-21.1 s (fs=96 kHz) 01V96i-Reference Manual