Yamaha 01V96i Reference Manual - Page 25
Setting the Input Channels from the Control Surface, Setting Input Channel Levels
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Input Channels Setting the Input Channels from the Control Surface 25 Setting the Input Channels from the Control Surface You can use the faders, [SEL] buttons, and various buttons and controls in the SELECTED CHANNEL section on the top panel to directly control most parameters for Input Channels. Setting Input Channel Levels and Panning the Channels ■ Input Channels 1-32 1. Press the LAYER [1-16] or [17-32] button to select a layer. 2. Press the [SEL] button of the channel for which you want to adjust the input level and/or pan settings. 3. Use the faders to set the Input Channel levels. 4. Rotate the SELECTED CHANNEL [PAN] con- trol to adjust the pan settings. When you rotate the [PAN] control, the Pan/Route | Pan page is displayed automatically. 3. Rotate the level control of the desired chan- nel to set the level. You can always view the current channel level at the top of the display. 4. Rotate the SELECTED CHANNEL [PAN] con- trol to adjust the pan setting. The pan setting can be applied to either ST IN channel L or R. To switch between channels L and R for the pan setting, press the same [SEL] button repeatedly. (The channel currently being controlled is indicated in the upper-left corner of the display.) EQ'ing Input Channels 1. Press the [SEL] button or move the fader for the channel you wish to control. 2. To control EQ for the currently-selected chan- nel, press one of the following buttons to select the band you wish to adjust: • [HIGH] button...... HIGH band • [H-MID] button ... HIGH-MID band • [L-MID] button .... LOW-MID band • [LOW] button ....... LOW band 3. Use the SELECTED CHANNEL [Q], [FRE- QUENCY], and [GAIN] controls to adjust the Q, frequency, and gain of the band selected in Step 2. When the Auto EQUALIZER Display (page 109) check box is on, the 01V96i displays the EQ/EQ Edit page. ■ ST IN Channels 1-4 1. Use the ST IN [ST IN] button to select the desired ST IN Channels. The indicators next to the [ST IN] button display the ST IN Channels currently selected for control by the ST IN section. 2. Press the [SEL] button for the channel for which you want to adjust the level and/or pan settings. 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/25.png)