Yamaha 01V96i Reference Manual - Page 140
DELAY+REV, DELAY->REV, DIST->DELAY, One input, two output delay and reverb effects in, parallel.
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
140 Appendix: Parameter Lists DELAY+REV One input, two output delay and reverb effects in parallel. Parameter DELAY L DELAY R FB. DLY FB. GAIN DELAY HI HPF LPF DLY.BAL REV TIME INI. DLY REV HI DIFF. DENSITY SYNC NOTE L NOTE R NOTE FB Range 0.0-1000.0 ms 0.0-1000.0 ms 0.0-1000.0 ms -99 to +99% 0.1-1.0 THRU, 21.2 Hz-8.00 kHz 50.0 Hz-16.0 kHz, THRU 0-100% 0.3-99.0 s 0.0-500.0 ms 0.1-1.0 0-10 0-100% OFF, ON 1 1 1 Description Left channel delay time Right channel delay time Feedback delay time Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Delay high-frequency feedback ratio High-pass filter cutoff frequency Low-pass filter cutoff frequency Delay and reverb balance (0% = all delay, 100% = all reverb) Reverb time Initial delay before reverb begins High-frequency reverb time ratio Spread Reverb density Tempo parameter sync on/off Used in conjunction with TEMPO to determine left channel DELAY L Used in conjunction with TEMPO to determine right channel DELAY R Used in conjunction with TEMPO to determine FB. DLY 1. (Maximum value depends on the tempo setting) DELAY->REV One input, two output delay and reverb effects in series. Parameter DELAY L DELAY R FB. DLY FB. GAIN DELAY HI HPF LPF DLY.BAL REV TIME INI. DLY REV HI DIFF. DENSITY SYNC NOTE L NOTE R NOTE FB Range 0.0-1000.0 ms 0.0-1000.0 ms 0.0-1000.0 ms -99 to +99% 0.1-1.0 THRU, 21.2 Hz-8.00 kHz 50.0 Hz-16.0 kHz, THRU 0-100% 0.3-99.0 s 0.0-500.0 ms 0.1-1.0 0-10 0-100% OFF, ON 1 *1 *1 Description Left channel delay time Right channel delay time Feedback delay time Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Delay high-frequency feedback ratio High-pass filter cutoff frequency Low-pass filter cutoff frequency Delay and delayed reverb balance (0% = all delayed reverb, 100% = all delay) Reverb time Initial delay before reverb begins High-frequency reverb time ratio Spread Reverb density Tempo parameter sync on/off Used in conjunction with TEMPO to determine left channel DELAY L Used in conjunction with TEMPO to determine right channel DELAY R Used in conjunction with TEMPO to determine FB. DLY 1. (Maximum value depends on the tempo setting) DIST->DELAY One input, two output distortion and delay effects in series. Parameter Range DST TYPE DST1, DST2, OVD1, OVD2, CRUNCH DRIVE 0-100 MASTER 0-100 TONE -10 to +10 N. GATE 0-20 DELAY 0.0-2725.0 ms FB. GAIN -99 to +99% HI. RATIO FREQ. DEPTH 0.1-1.0 0.05-40.00 Hz 0-100% DLY.BAL 0-100% SYNC OFF, ON DLY.NOTE 1 MOD.NOT 2 E Description Distortion type (DST = distortion, OVD = overdrive) Distortion drive Master volume Tone control Noise reduction Delay time Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) High-frequency feedback ratio Modulation speed Modulation depth Distortion and delay balance (0% = all distortion, 100% = all delayed distortion) Tempo parameter sync on/off Used in conjunction with TEMPO to determine DELAY Used in conjunction with TEMPO to determine FREQ. 1. (Maximum value depends on the tempo setting) 2. 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/140.png)