Yamaha 01V96i Reference Manual - Page 59
Grouping Channels & Linking Parameters, Grouping & Linking, Using Fader Groups and Mute Groups
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Grouping Channels & Linking Parameters Grouping Channels & Linking Parameters 59 Grouping Channels & Linking Parameters This chapter describes how to group faders or [ON] buttons for multiple channels and link the EQ or compressor parameters for simultaneous operation. Grouping & Linking On the 01V96i, you can group faders or [ON] buttons for multiple Input Channels (Input Channels 1-32, ST IN Channels 1-4) or multiple Output Channels (Bus Outs 1-8, Aux Outs 1-8, Stereo Out) and link the EQ or compressor parameters. The following elements can be grouped or linked within Input Channels or Output Channels. • Fader group Input Channel or Output Channel faders (or level controls) can be grouped. There are eight Input Channel Fader groups and four Output Channel Fader groups. When channel faders or level controls are grouped, operating any one of them enables you to control the level of the other grouped faders or level controls while maintaining the relative level differences. Also, the 01V96i features a Fader Group Master function that enables you to control the level of all grouped channels using the Group Master level while maintaining the relative level balance between channels. • Mute group Input Channel or Output Channel [ON] buttons can be grouped. There are eight Input Channel mute groups and four Output Channel mute groups. When channel [ON] buttons are grouped, pressing any one of them turns the [ON] buttons for all the grouped channels on or off. A mute group can include On channels and Off channels at the same time, which turn off or on respectively when you press any one of the grouped [ON] buttons. Also, the 01V96i features a Mute Group Master function that enables you to mute grouped channels using the Master Mute buttons. • EQ Link Input or Output Channel EQ parameters can be linked. There are four EQ links for Input Channels and Output Channels respectively. All channels in an EQ link share the same EQ parameter settings. When you change an EQ parameter value for one of the linked channels, the change is applied to all other linked channels. • Compressor Link Input or Output Channel compressor parameters can be linked. There are four compressor links for Input Channels and Output Channels respectively. All channels in a compressor link share the same compressor parameter settings. When you change a compressor parameter value for one of the linked channels, the change is applied to all other linked channels. Tip: Compressor Link is not available for the ST IN Channels, since they do not feature compressors. Using Fader Groups and Mute Groups Follow the steps below to group faders or [ON] buttons for Input Channels or Output Channels. 1. Press the DISPLAY ACCESS [PAIR/GROUP] button repeatedly until one of the pages that contains the desired group and channels appears. • In Fader page This page enables you to set Fader groups (A-H) for Input Channels 1-32 and ST IN Channels 1-4. • Out Fader page This page enables you to set Fader groups (Q-T) for Bus Outs (1-8), Aux Outs (1-8) and Stereo Out. In Fader page • In Mute page This page enables you to set Mute groups (I-P) for Input Channels 1-32 and ST IN Channels 1-4 respectively. 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/59.png)