Yamaha 01V96i Reference Manual - Page 18
Setting the Input Channels from the Display, Switching the Signal Phase, Delaying Input Channels
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 Input Channels Setting the Input Channels from the Display To set the Input Channel parameters, you can either move the cursor to the desired parameter on the display and change the value, or operate the desired button or control on the top panel to directly change the setting. This section explains how to set the parameters via the display. Switching the Signal Phase To switch the phase of each Input Channel, press the [ /INSERT/DELAY] button repeatedly until the following /INS/DLY | Phase page appears. Move the cursor to the NOR/REV button of the channel for which you want to change the phase, then press the [ENTER] or [INC]/[DEC] buttons to change the setting. Delaying Input Channels To set the delay for each channel, press the [ /INSERT/DELAY] button repeatedly until the page listed below that contains the desired channels appears. • DLY 1-16 page This page enables you to set the Delay function for Input Channels 1-16. • DLY 17-32 page This page enables you to set the Delay function for Input Channels 17-32. The parameters on these two pages (and the procedure for setting them) are the same. 31 2 1 2 1 NOR/REV These buttons switch the corresponding Input Channel phase. NOR buttons indicate normal phase, and REV buttons indicate reversed phase. 2 GLOBAL The GLOBAL NOR/REV buttons allow you to set the phase for all Input Channels simultaneously. Tip: • The name of the currently-selected channel is indicated in the upper-right corner of the screen. • You can set the phase separately for each of the ST IN Channels or for each channel in a channel pair. If you selected the desired ST IN Channel using the corresponding [SEL] button, pressing the same [SEL] button repeatedly will toggle between channels L and R. 1 DELAY SCALE The following buttons determine the units of the delay value shown below the msec value. • meter Units are set to meters. • feet Units are set to feet. • sample Units are set to samples. • beat Units are set to beats. • frame Units are set to timecode frames. 2 GANG button When this button is turned on (highlighted), the delay time for each channel in a channel pair can be set simultaneously. When this option is turned off, the delay time can be set for each channel in a channel pair individually. 3 Channel section You can set individual delay parameters here. The delay parameters include the following items: • ON/OFF This button switches the corresponding channel delay on or off. • msec This parameter sets the delay time in milliseconds. • meter/feet/sample/beat/frame The delay time can be set using units of meters, feet, samples, beats, or frames, which you select by using the DELAY SCALE buttons. 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/18.png)