Yamaha 01V96i Reference Manual - Page 143

Appendix: Parameter Lists Effects Parameters 143 Equalizer601 This emulates the characteristics of an analog equalizer of the 1970s. By reproducing the distortion that is typical of analog circuits, it adds drive to the sound. Parameter Range Description TYPE DRIVE, CLEAN Switches the equalizer type INPUT -18.0 to +18.0 dB Adjusts the input gain OUTPUT -18.0 to +18.0 dB Adjusts the output gain Level meter This shows the effect's input level or output level. Use the METER: [IN][OUT] switches to choose which level is shown Q/TYPE LO: LSH-1, LSH-2, HPF-1, HPF-2 MID1-4: 0.50-16.00 HI: LPF-1, LPF-2, HSH-1, HSH-2 These parameters control the shape of the frequency response curve for each filter band. For the MID 1-4 bands you can specify the sharpness (Q) of the frequency response curve. For the LO and HI bands, you can select one of four filter types fs=44.1/48 kHz: 16.0-20.0 kHz, F fs=88.2/96 kHz: 16.0 Hz-40.0 kHz (HI TYPE=HSH-1 or These specify the center frequency of the filter HSH-2: HI Band= 1.0-40 kHz) G -18.0 to +18.0 dB These specify the gain of the filter SW ON, OFF These switch each filter band on/off Frequency response curve This displays the total frequency response curve for all bands FLAT This resets the gain of all bands to 0 dB OpenDeck This emulates the tape compression produced by two open-reel tape recorders (a recording deck and a reproduction deck). You can change the tonal character by adjusting various elements, such as the deck type, tape quality, and playback speed. Parameter Range REC DEC Swss70, Swss78, Swss85, Amer70 REC LVL -96.0 to +18.0dB REC HI -6.0 to +6.0dB REC BIAS -1.00 to +1.00 MAKEUP ON, OFF REPR DECK REPR LVL Swss70, Swss78, Swss85, Amer70 -96.0 to +18.0 dB REPR HI -6.0 to +6.0 dB REPR LO TP SPEED TP KIND -6.0 to +6.0 dB 15 ips, 30 ips New, Old Description Selects the type of recording deck Adjusts the input level of the recording deck. As you raise the level, tape compression is generated, narrowing the dynamic range and distorting the sound Adjusts the high range gain of the recording deck Adjusts the bias of the recording deck If this is on, operating the recording deck's level ([RECORD]/[REC LVL] knob) will cause the reproduction deck's level ([REPRODUCE]/[REPR LVL] knob) to move in tandem, maintaining a fixed output level This allows you to change the amount of distortion without changing the output level Selects the type of reproduction deck Adjusts the output level of the reproduction deck Adjusts the high range gain of the reproduction deck Adjusts the low range gain of the reproduction deck Selects the tape speed Selects the type of tape 01V96i-Reference Manual