Yamaha 01V96i Reference Manual - Page 41

Panning Aux Sends

41

01V96i—Reference Manual

Aux Outs

3

LEVEL

This field displays in dB the level of the Aux Send cur-

rently-selected by the cursor.

2.

Move the cursor to either the DISPLAY LEVEL

or PRE/POST button, then press [ENTER] to

display the Level or Pre/Post parameters.

3.

If you selected the PRE/POST button in Step

2, move the cursor to the desired Input Chan-

nel and Aux intersection, then press the

[ENTER] button to change the signal source

point.

4.

If you selected the LEVEL button in Step 2,

move the cursor to the desired Input Channel

and Aux intersection, then edit the Send level

or turn the currently-selected AUX Send on or

off.

Rotate the Parameter wheel or press the [INC]/[DEC]

buttons to set the Send level, then press the [ENTER] but-

ton to turn the currently-selected Aux Send on or off.

One of the following indicators appears, depending on

the current Aux mode.

•

Aux Sends in Fixed mode

A “FIX” indicator appears for On Aux Sends, and a dot

“ .” appears for Off Aux Sends.

•

Aux Sends in Variable mode

The current Send levels are displayed by the bar graphs. If

the level is set to nominal (0.0 dB), “N” appears in the bar.

The bars for Aux Sends that are turned off are high-

lighted.

Panning Aux Sends

You can pair adjacent odd-even (in this order) Aux Sends for

stereo operation. This enables you to pan signals from Input

Channels to paired Aux Sends.

1.

Pair the desired two Aux Sends. (See page

33

for more information on pairing channels.)

2.

Use the FADER MODE [AUX 1]–[AUX 8] but-

tons to select one of the paired Aux Sends.

3.

Repeatedly press the button you pressed in

Step 2 to display the Aux | Pan page.

1

Aux pan controls

These controls adjust the pan setting of signals routed

from Input Channels to paired Aux buses.

2

MODE

The MODE parameter determines how paired Input

Channels are panned.

3

INPUT PAN LINK

When this parameter is turned on, Aux Sends follow the

Input Channel Pan.

4.

Move the cursor to the Aux pan control of the

desired Input Channel, the rotate the Param-

eter wheel to set the pan value.

5.

If necessary, move the cursor to the MODE

parameter box, then rotate the Parameter

wheel to select INDIVIDUAL, GANG, or INV

GANG, then press [ENTER].

If the INPUT PAN LINK ON/OFF button is turned off,

this Mode setting is independent of the Mode parameter

on the Pan page. (See page 22 for more information on

Mode options.)

Note:

You can switch between Pre and Post only for Aux

Sends that are set to Variable mode. The “FIX” indication

appears for Aux Sends that are set to Fixed mode, and you

cannot switch Pre/Post.

3

2

1

Section	Page
How to Use This Reference Manual	1
Contents	2
Contents of the Owner’s Manual (Booklet)	3
Function Tree	4
Control Surface & Rear Panel	6
Control Surface	6
Rear Panel	10
Analog I/O & Digital I/O	12
Analog Inputs & Outputs	12
Digital Inputs & Outputs	13
Converting Sampling Rates of Signals Received at I/O Card Inputs	14
Monitoring Digital Input Channel Status	14
Dithering Digital Outputs	15
Setting the Transfer Format for Higher Sampling Rates	16
Input Channels	17
About Input Channels	17
Setting the Input Channels from the Display	18
Setting the Input Channels from the Control Surface	25
Pairing Input Channels	26
Naming Input Channels	28
Bus Outs	29
About Stereo Out	29
Bus Out 1–8	29
Setting the Stereo Out and Bus Out 1–8 from the Display	30
Setting the Stereo Out and Bus Out 1–8 from the Control Surface	33
Pairing Buses or Aux Sends	33
Attenuating Output Signals	34
Naming the Stereo Out and Bus Outs	35
Aux Outs	36
Aux Out 1–8	36
Setting Aux Out 1–8 from the Display	36
Setting Aux Out 1–8 from the Control Surface	38
Setting Aux Send Levels	38
Viewing Aux Send Settings for Multiple Channels	40
Panning Aux Sends	41
Copying Channel Fader Positions to Aux Sends	42
Input & Output Patching	43
Input Patching	43
Output Patching	44
Patching Direct Outs	46
Insert Patching	47
Monitoring	49
Monitor	49
Monitor and Solo Setup	49
Using the Monitor	50
Using the Solo Function	51
Surround Pan	52
About Surround Pan	52
Setting Up and Selecting Surround Pan Modes	53
Surround Panning	56
Grouping Channels & Linking Parameters	59
Grouping & Linking	59
Using Fader Groups and Mute Groups	59
Using Fader Group Master	61
Using Mute Group Master	62
Linking EQ and Compressor Parameters	62
Internal Effects	64
About the Internal Effects	64
Using Effects Processors via Aux Sends	64
Inserting the Internal Effects into Channels	65
Editing Effects	66
About Add-On Effects	67
About Plug-Ins	67
Scene Memories	68
About Scene Memories	68
What is Stored in a Scene?	68
About Scene Numbers	68
Storing and Recalling Scenes	69
Auto Scene Memory Update	70
Fading Scenes	71
Recalling Scenes Safely	72
Sorting Scenes	72
Copying and Pasting a Scene (Global Paste)	73
Libraries	74
About the Libraries	74
General Library Operation	74
Using Libraries	75
Remote Control	83
About Remote Function	83
Pro Tools Remote Layer	83
Nuendo/Cubase Remote Layer	93
Other DAW Remote Layer	94
MIDI Remote Layer	94
Machine Control Function	98
MIDI	100
MIDI & the 01V96i	100
MIDI Port Setup	101
Assigning Scenes to Program Changes for Remote Recall	103
Assigning Parameters to Control Changes for Real-time Control	104
Controlling Parameters by Using Parameter Changes	106
Transmitting Parameter Settings via MIDI (Bulk Dump)	107
Other Functions	109
Setting Preferences	109
Creating a Custom Layer by Combining Channels (User Assignable Layer)	110
Cascading Consoles	111
Checking the Battery and the System Version	113
Calibrating the Faders	113
Index	115
Appendix: Parameter Lists	119
USER DEFINED KEYS	119
USER DEFINED KEYS Initial Assignments	121
Input Patch Parameters	121
Initial Input Patch Settings	123
Output Patch Parameters	125
Initial Output Patch Settings	127
User Defined Remote Layer Initial Bank Settings	128
Effects Parameters	132
Effects and tempo synchronization	146
Preset EQ Parameters	147
Preset Gate Parameters (fs = 44.1 kHz)	148
Preset Compressor Parameters (fs = 44.1 kHz)	149
Dynamics Parameters	151
Appendix: MIDI	156
Scene Memory to Program Change Table	156
Initial Parameter to Control Change Table	157
MIDI Data Format	173

Yamaha 01V96i Reference Manual - Page 41

Panning Aux Sends, Aux Sends in Fixed mode

Page 41 highlights