Yamaha 01V96i Reference Manual - Page 61
Using Fader Group Master, After you perform Step 5 in Using Fader - mixing console
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Grouping Channels & Linking Parameters Using Fader Group Master 61 Using Fader Group Master The 01V96i features a Fader Group Master function that enables you to control the level of all channels using the Group Master level while maintaining the relative balance between channels, much like a VCA group on an analog mixing console. While this function is enabled, channel fader operation does not affect channel levels in the corresponding Fader group. 1. After you perform Step 5 in "Using Fader Groups and Mute Groups" on page 59, use the cursor buttons to select the INPUT FADER MASTER check box or the OUTPUT FADER MASTER check box, then press [ENTER] to turn on the Fader Group Master function. 2. When the Fader Master check box is checked, you can set channel levels of the Fader groups in the Master column. When the Master column is selected, repeatedly pressing the [ENTER] button turns the Fader group on and off. You can also make these settings in the In Master page or Out Master page, as shown below. 3. Press the DISPLAY ACCESS [GROUP] button repeatedly until the Group | In Master or Group | Out Master page appears. 4. Use the cursor buttons to select parameters, then use the Parameter wheel, [INC]/[DEC] buttons, or [ENTER] button to set the parameters. • INPUT/OUTPUT FADER MASTER When this check box is checked, you can set the master levels for the Fader groups. The resultant Channel level equals the corresponding Channel fader level plus the Group Master level. • ALL NOMINAL This button resets the master levels for all Fader groups to nominal. • ON/OFF This turns each Input Fader group on or off. This function works like a VCA mute on an analog mixing console. • Faders These faders adjust the master levels of the Fader groups. Fader knobs are highlighted when faders are set to 0.0 dB. Press the [ENTER] button to set the currently-selected fader to 0.0 dB. You can also control the parameters from the channel strips on the control surface as described below by using the User Assignable Layer of the Remote Layers. See page 110 for information on the User Assignable Layer. • [SEL] buttons These buttons move the cursor on the In Master page or Out Master page. • [SOLO] buttons These buttons turn the Solo function of each Fader group on and off. You can monitor all the channels in each Fader group. • Channel Faders The channel faders enable you to set the master level for each Fader group. 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/61.png)