Yamaha 01V96i Reference Manual - Page 132
Effects Parameters, Reverb Hall, Reverb Room, Reverb Stage, Early Ref., Gate Reverb, Reverse Gate
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
132 Appendix: Parameter Lists Effects Parameters REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE One input, two output hall, room, stage, and plate reverb simulations, all with gates. Parameter REV TIME INI. DLY HI. RATIO LO. RATIO DIFF. DENSITY E/R DLY E/R BAL. HPF LPF GATE LVL ATTACK HOLD DECAY Range 0.3-99.0 s 0.0-500.0 ms 0.1-1.0 0.1-2.4 0-10 0-100% 0.0-100.0 ms 0-100% THRU, 21.2 Hz-8.00 kHz 50.0 Hz-16.0 kHz, THRU OFF, -60 to 0 dB 0-120 ms 1 2 Description Reverb time Initial delay before reverb begins High-frequency reverb time ratio Low-frequency reverb time ratio Reverb diffusion (left-right reverb spread) Reverb density Delay between early reflections and reverb Balance of early reflections and reverb (0% = all reverb, 100% = all early reflections) High-pass filter cutoff frequency Low-pass filter cutoff frequency Level at which gate kicks in Gate opening speed Gate open time Gate closing speed 1. 0.02 ms-2.13 s (fs=44.1 kHz), 0.02 ms-1.96 s (fs=48 kHz), 0.01 ms-1.06 s (fs=88.2 kHz), 0.01 ms-981 ms (fs=96 kHz) 2. 6 ms-46.0 s (fs=44.1 kHz), 5 ms-42.3 s (fs=48 kHz), 3 ms-23.0 s (fs=88.2 kHz), 3 ms-21.1 s (fs=96 kHz) EARLY REF. One input, two output early reflections. Parameter Range Description TYPE S-Hall, L-Hall, Random, Revers, Plate, Spring Type of early reflection simulation ROOMSIZE 0.1-20.0 Reflection spacing LIVENESS 0-10 Early reflections decay characteristics (0 = dead, 10 = live) INI. DLY 0.0-500.0 ms Initial delay before reverb begins DIFF. 0-10 Reflection diffusion (left-right reflection spread) DENSITY 0-100% Reflection density ER NUM. 1-19 Number of early reflections FB.GAIN -99 to +99% Feedback gain HI. RATIO 0.1-1.0 High-frequency feedback ratio HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency GATE REVERB, REVERSE GATE One input, two output early reflections with gate, and early reflections with reverse gate. Parameter TYPE ROOMSIZE LIVENESS INI. DLY DIFF. DENSITY HI. RATIO ER NUM. FB.GAIN HPF LPF Range Type-A, Type-B 0.1-20.0 0-10 0.0-500.0 ms 0-10 0-100% 0.1-1.0 1-19 -99 to +99% THRU, 21.2 Hz-8.00 kHz 50.0 Hz-16.0 kHz, THRU Description Type of early reflection simulation Reflection spacing Early reflections decay characteristics (0 = dead, 10 = live) Initial delay before reverb begins Reflection diffusion (left-right reflection spread) Reflection density High-frequency feedback ratio Number of early reflections Feedback gain High-pass filter cutoff frequency Low-pass filter cutoff frequency MONO DELAY One input, two output basic repeat delay. Parameter DELAY FB. GAIN HI. RATIO HPF LPF SYNC NOTE Range 0.0-2730.0 ms -99 to +99% 0.1-1.0 THRU, 21.2 Hz-8.00 kHz 50.0 Hz-16.0 kHz, THRU OFF, ON 1 Description Delay time Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) High-frequency feedback ratio High-pass filter cutoff frequency Low-pass filter cutoff frequency Tempo parameter sync on/off Used in conjunction with TEMPO to determine DELAY 1. (Max. value depends on tempo setting) 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/132.png)