Home » Yamaha Manuals » Audio Mixers » Yamaha 01V96i » Manual Viewer

Yamaha 01V96i Reference Manual - Page 67

About Add-On Effects, About Plug-Ins

Get Yamaha 01V96i PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

Internal Effects About Add-On Effects 67 button is on, the 01V96i updates the TEMPO data (BPM) based on the MIDI Clock information received at the MIDI IN port. You can also specify the tempo by moving the cursor to the TAP TEMPO button and double-clicking the [ENTER] button. The 01V96i calculates the tempo based on the time interval between your two taps (clicks) on the [ENTER] button. Tip: If the Freeze effect is selected, the TEMPO section displays the record and playback buttons for using the effect, the recording data condition, and a progress bar that indicates the current status. 7 Meters These meters indicate the input or output levels of the currently-selected effects processor. Select the IN button or OUT button to display the input levels or output levels respectively. Tip: You can also view the input and output levels of the effects processors on the Meter | Effect 1-4 pages. Move the cursor to a parameter you wish to change, and rotate the Parameter wheel or press the [INC]/[DEC] buttons to adjust the setting. You can store the edited settings as a new program in the Effects library (see page 76). Note: You cannot change the effects type on this page. To change the effects type, recall a program that uses the desired effects type from the Effects library. About Plug-Ins If you installed a mini-YGDAI card that supports the Effects function into Slot, you can use plug-in effects in addition to the internal effects processors. You can patch Bus signals or channel insert outs to the plug-in input. The plug-in output can be patched to Input Channels or channel insert ins. To use the plug-in effects, press the [EFFECT] button repeatedly until the Effect | P-In Edit page appears. For details on using plug-ins, refer to the owner's manual that came with the plug-in card. About Add-On Effects The 01V96i comes with pre-installed Add-On Effects created with VCM technology to faithfully simulate analog circuits using digital processing. Add-On Effects will be stored in and recalled from preset #45 and the subsequent preset programs. You can also store edited effects in user program #57 and the subsequent user programs. 01V96i-Reference Manual

Section	Page
How to Use This Reference Manual	1
Contents	2
Contents of the Owner’s Manual (Booklet)	3
Function Tree	4
Control Surface & Rear Panel	6
Control Surface	6
Rear Panel	10
Analog I/O & Digital I/O	12
Analog Inputs & Outputs	12
Digital Inputs & Outputs	13
Converting Sampling Rates of Signals Received at I/O Card Inputs	14
Monitoring Digital Input Channel Status	14
Dithering Digital Outputs	15
Setting the Transfer Format for Higher Sampling Rates	16
Input Channels	17
About Input Channels	17
Setting the Input Channels from the Display	18
Setting the Input Channels from the Control Surface	25
Pairing Input Channels	26
Naming Input Channels	28
Bus Outs	29
About Stereo Out	29
Bus Out 1–8	29
Setting the Stereo Out and Bus Out 1–8 from the Display	30
Setting the Stereo Out and Bus Out 1–8 from the Control Surface	33
Pairing Buses or Aux Sends	33
Attenuating Output Signals	34
Naming the Stereo Out and Bus Outs	35
Aux Outs	36
Aux Out 1–8	36
Setting Aux Out 1–8 from the Display	36
Setting Aux Out 1–8 from the Control Surface	38
Setting Aux Send Levels	38
Viewing Aux Send Settings for Multiple Channels	40
Panning Aux Sends	41
Copying Channel Fader Positions to Aux Sends	42
Input & Output Patching	43
Input Patching	43
Output Patching	44
Patching Direct Outs	46
Insert Patching	47
Monitoring	49
Monitor	49
Monitor and Solo Setup	49
Using the Monitor	50
Using the Solo Function	51
Surround Pan	52
About Surround Pan	52
Setting Up and Selecting Surround Pan Modes	53
Surround Panning	56
Grouping Channels & Linking Parameters	59
Grouping & Linking	59
Using Fader Groups and Mute Groups	59
Using Fader Group Master	61
Using Mute Group Master	62
Linking EQ and Compressor Parameters	62
Internal Effects	64
About the Internal Effects	64
Using Effects Processors via Aux Sends	64
Inserting the Internal Effects into Channels	65
Editing Effects	66
About Add-On Effects	67
About Plug-Ins	67
Scene Memories	68
About Scene Memories	68
What is Stored in a Scene?	68
About Scene Numbers	68
Storing and Recalling Scenes	69
Auto Scene Memory Update	70
Fading Scenes	71
Recalling Scenes Safely	72
Sorting Scenes	72
Copying and Pasting a Scene (Global Paste)	73
Libraries	74
About the Libraries	74
General Library Operation	74
Using Libraries	75
Remote Control	83
About Remote Function	83
Pro Tools Remote Layer	83
Nuendo/Cubase Remote Layer	93
Other DAW Remote Layer	94
MIDI Remote Layer	94
Machine Control Function	98
MIDI	100
MIDI & the 01V96i	100
MIDI Port Setup	101
Assigning Scenes to Program Changes for Remote Recall	103
Assigning Parameters to Control Changes for Real-time Control	104
Controlling Parameters by Using Parameter Changes	106
Transmitting Parameter Settings via MIDI (Bulk Dump)	107
Other Functions	109
Setting Preferences	109
Creating a Custom Layer by Combining Channels (User Assignable Layer)	110
Cascading Consoles	111
Checking the Battery and the System Version	113
Calibrating the Faders	113
Index	115
Appendix: Parameter Lists	119
USER DEFINED KEYS	119
USER DEFINED KEYS Initial Assignments	121
Input Patch Parameters	121
Initial Input Patch Settings	123
Output Patch Parameters	125
Initial Output Patch Settings	127
User Defined Remote Layer Initial Bank Settings	128
Effects Parameters	132
Effects and tempo synchronization	146
Preset EQ Parameters	147
Preset Gate Parameters (fs = 44.1 kHz)	148
Preset Compressor Parameters (fs = 44.1 kHz)	149
Dynamics Parameters	151
Appendix: MIDI	156
Scene Memory to Program Change Table	156
Initial Parameter to Control Change Table	157
MIDI Data Format	173

Match case Limit results 1 per page

About Add-On Effects

01V96i—Reference Manual

Internal Effects

button

is on, the 01V96i updates the TEMPO data

(BPM) based on the MIDI Clock information received at

the MIDI IN port. You can also specify the tempo by

moving the cursor to the

TAP TEMPO button

and dou-

ble-clicking the [ENTER] button. The 01V96i calculates

the tempo based on the time interval between your two

taps (clicks) on the [ENTER] button.

Meters

These meters indicate the input or output levels of the

currently-selected effects processor. Select the IN button

or OUT button to display the input levels or output levels

respectively.

Move the cursor to a parameter you wish to change, and

rotate the Parameter wheel or press the [INC]/[DEC]

buttons to adjust the setting. You can store the edited set-

tings as a new program in the Effects library (see

page 76).

About Add-On Effects

The 01V96i comes with pre-installed Add-On Effects created

with VCM technology to faithfully simulate analog circuits

using digital processing. Add-On Effects will be stored in and

recalled from preset #45 and the subsequent preset programs.

You can also store edited effects in user program #57 and the

subsequent user programs.

About Plug-Ins

If you installed a mini-YGDAI card that supports the Effects

function into Slot, you can use plug-in effects in addition to

the internal effects processors.

You can patch Bus signals or channel insert outs to the plug-in

input. The plug-in output can be patched to Input Channels

or channel insert ins.

To use the plug-in effects, press the [EFFECT] button repeat-

edly until the Effect | P-In Edit page appears.

For details on using plug-ins, refer to the owner’s manual that

came with the plug-in card.

Tip:

If the Freeze effect is selected, the TEMPO section dis-

plays the record and playback buttons for using the effect, the

recording data condition, and a progress bar that indicates

the current status.

Tip:

You can also view the input and output levels of the

effects processors on the Meter | Effect 1–4 pages.

Note:

You cannot change the effects type on this page. To

change the effects type, recall a program that uses the desired

effects type from the Effects library.