Yamaha 01V96i Reference Manual - Page 44

44 Input & Output Patching 3. Press [ENTER] to confirm the change. Tip: • You can patch an input signal to multiple Input Channels. • You can store the Input Patch settings to the Input Patch library. Refer to "Libraries" on page 74 for more information. Output Patching The 01V96i's Stereo Out, Bus Out 1-8, Aux Out 1-8 signals can be patched to any outputs, ADAT OUT output channels, and slot output channels. Patch example: Aux Out 1 Aux Out 2 Aux Out 3 Aux Out 4 Aux Out 5 Aux Out 6 Aux Out 7 Aux Out 8 Output Patching OMNI Out connector 1 OMNI Out connector 2 OMNI Out connector 3 OMNI Out connector 4 OMNI Out connector 1 OMNI Out connector 2 OMNI Out connector 3 OMNI Out connector 4 By default, the following signal paths are patched to outputs, ADAT OUT output channels, and slot output channels: Output connectors and slot channels ADAT OUT output channels 1-8 Slot Channels 1-8 Slot Channels 9-16 OMNI OUT connectors 1-4 2TR OUT DIGITAL (L) 2TR OUT DIGITAL (R) Signal flow Bus Outs 1-8 Bus Outs 1-8 Bus Outs 1-8 Aux Outs 1-4 Stereo Out L Stereo Out R Tip: • You can patch a signal to multiple outputs. • You can store the Output Patch settings to the Output Patch library. Refer to "Libraries" on page 74 for more information. You can change these patches, if you desire. The procedure for patching signals to output varies depending on the output connectors and slots. Changing the Signal Path to the ADAT OUT Connector, Slot, or OMNI OUT connectors Follow the steps below to change the signal path patched to the ADAT OUT connector, the optional mini-YGDAI card installed in the slot, or the OMNI OUT connectors. 1. Press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch | Out Patch page appears. Each parameter box displays the currently-patched signal path. 1 2 3 1 SLOT 1-16 These parameter boxes set the routing of Slot Channel 1-16 signals. 2 ADAT 1-8 These parameter boxes set the routing of ADAT OUT connector output channel 1-8 signals. 3 OMNI 1-4 These parameter boxes set the routing of OMNI OUT connector 1-4 signals. The parameter indicators are explained below: Parameter value Description - No assignment BUS1-BUS8 Bus Out 1-8 signal AUX1-AUX8 Aux Out 1-8 signal ST L/R Stereo Out signal INS CH1-INS CH32 Input Channel 1-32 Insert Out INS BUS1-INS BUS8 Bus Out 1-8 Insert Out INS AUX1-INS AUX8 Aux Out 1-8 Insert Out INS ST-L/ST-R Stereo Out Insert Out CAS BUS1-BUS8 Bus 1-8 Cascade Outs CAS AUX1-AUX8 Aux Bus 1-8 Cascade Outs CAS ST-L/ST-R Stereo Bus Cascade Outs CASSOLOL/CASSOLOR Solo Bus Cascade Outs 2. Move the cursor to a patch parameter you wish to change, then rotate the Parameter wheel or press the [INC]/[DEC] buttons to modify the patching. 01V96i-Reference Manual