Home » Yamaha Manuals » Audio Mixers » Yamaha 01V96i » Manual Viewer

Yamaha 01V96i Reference Manual - Page 31

EQ'ing the Stereo Out and Bus, Routing Bus Out 1-8 Signals to, the Stereo Bus, Out Settings

Get Yamaha 01V96i PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Bus Outs Setting the Stereo Out and Bus Out 1-8 from the Display 31 EQ'ing the Stereo Out and Bus Outs To set the EQ for the Stereo Out and Bus Out 1-8 EQ, press the DISPLAY ACCESS [EQ] button, then press the [F1] button to display the EQ | EQ Edit page, and use the [SEL] buttons to select the Stereo Out or Bus Out 1-8. 2 TO ST ON/OFF These buttons turn on and off the Bus Out 1-8 to the Stereo Bus routing. 3 TO ST Faders These faders set the Bus Out 1-8 to Stereo Bus levels. Viewing the Stereo Out and Bus Out Settings You can view and adjust parameter settings for the currently-selected Stereo Out or Bus Out on the View | Parameter and Fader pages. ■ Viewing the Compressor and EQ Settings To display the View | Parameter page, use the corresponding [SEL] button to select the desired bus, then press the DISPLAY ACCESS [VIEW] button, then press the [F1] button. The parameters on this page (and the procedure for setting them) are the same as for Input Channels (see page 21). Note that the Stereo Out does not feature the STEREO LINK parameter. Routing Bus Out 1-8 Signals to the Stereo Bus You can patch Bus Out 1-8 signals to Outputs and Slot, as well as to the Stereo Bus. You can adjust the level and pan settings of the signals routed to the Stereo Bus for each bus. This is convenient when you wish to use Bus Outs (1-8) as a Group Bus. To patch the Bus Out 1-8 signals to the Stereo Bus, press the DISPLAY ACCESS [PAN/ROUTING] button repeatedly to display the Pan/Route | Bus to St page. 1 2 3 The parameters on this page (and the procedure for setting them) are the same as for Input Channels, except for the following items: • The Stereo Out and Bus Out 1-8 Parameter pages do not contain the Gate and Phase parameters. • The Stereo Out Parameter page does not contain the Pair parameter. Move the cursor to the desired parameter you wish to change, then rotate the Parameter wheel or press the [INC]/[DEC] buttons to modify the setting. 1 TO ST PAN These controls pan the Bus Out 1-8 signals between the left and right Stereo Out buses. 01V96i-Reference Manual

Section	Page
How to Use This Reference Manual	1
Contents	2
Contents of the Owner’s Manual (Booklet)	3
Function Tree	4
Control Surface & Rear Panel	6
Control Surface	6
Rear Panel	10
Analog I/O & Digital I/O	12
Analog Inputs & Outputs	12
Digital Inputs & Outputs	13
Converting Sampling Rates of Signals Received at I/O Card Inputs	14
Monitoring Digital Input Channel Status	14
Dithering Digital Outputs	15
Setting the Transfer Format for Higher Sampling Rates	16
Input Channels	17
About Input Channels	17
Setting the Input Channels from the Display	18
Setting the Input Channels from the Control Surface	25
Pairing Input Channels	26
Naming Input Channels	28
Bus Outs	29
About Stereo Out	29
Bus Out 1–8	29
Setting the Stereo Out and Bus Out 1–8 from the Display	30
Setting the Stereo Out and Bus Out 1–8 from the Control Surface	33
Pairing Buses or Aux Sends	33
Attenuating Output Signals	34
Naming the Stereo Out and Bus Outs	35
Aux Outs	36
Aux Out 1–8	36
Setting Aux Out 1–8 from the Display	36
Setting Aux Out 1–8 from the Control Surface	38
Setting Aux Send Levels	38
Viewing Aux Send Settings for Multiple Channels	40
Panning Aux Sends	41
Copying Channel Fader Positions to Aux Sends	42
Input & Output Patching	43
Input Patching	43
Output Patching	44
Patching Direct Outs	46
Insert Patching	47
Monitoring	49
Monitor	49
Monitor and Solo Setup	49
Using the Monitor	50
Using the Solo Function	51
Surround Pan	52
About Surround Pan	52
Setting Up and Selecting Surround Pan Modes	53
Surround Panning	56
Grouping Channels & Linking Parameters	59
Grouping & Linking	59
Using Fader Groups and Mute Groups	59
Using Fader Group Master	61
Using Mute Group Master	62
Linking EQ and Compressor Parameters	62
Internal Effects	64
About the Internal Effects	64
Using Effects Processors via Aux Sends	64
Inserting the Internal Effects into Channels	65
Editing Effects	66
About Add-On Effects	67
About Plug-Ins	67
Scene Memories	68
About Scene Memories	68
What is Stored in a Scene?	68
About Scene Numbers	68
Storing and Recalling Scenes	69
Auto Scene Memory Update	70
Fading Scenes	71
Recalling Scenes Safely	72
Sorting Scenes	72
Copying and Pasting a Scene (Global Paste)	73
Libraries	74
About the Libraries	74
General Library Operation	74
Using Libraries	75
Remote Control	83
About Remote Function	83
Pro Tools Remote Layer	83
Nuendo/Cubase Remote Layer	93
Other DAW Remote Layer	94
MIDI Remote Layer	94
Machine Control Function	98
MIDI	100
MIDI & the 01V96i	100
MIDI Port Setup	101
Assigning Scenes to Program Changes for Remote Recall	103
Assigning Parameters to Control Changes for Real-time Control	104
Controlling Parameters by Using Parameter Changes	106
Transmitting Parameter Settings via MIDI (Bulk Dump)	107
Other Functions	109
Setting Preferences	109
Creating a Custom Layer by Combining Channels (User Assignable Layer)	110
Cascading Consoles	111
Checking the Battery and the System Version	113
Calibrating the Faders	113
Index	115
Appendix: Parameter Lists	119
USER DEFINED KEYS	119
USER DEFINED KEYS Initial Assignments	121
Input Patch Parameters	121
Initial Input Patch Settings	123
Output Patch Parameters	125
Initial Output Patch Settings	127
User Defined Remote Layer Initial Bank Settings	128
Effects Parameters	132
Effects and tempo synchronization	146
Preset EQ Parameters	147
Preset Gate Parameters (fs = 44.1 kHz)	148
Preset Compressor Parameters (fs = 44.1 kHz)	149
Dynamics Parameters	151
Appendix: MIDI	156
Scene Memory to Program Change Table	156
Initial Parameter to Control Change Table	157
MIDI Data Format	173

Match case Limit results 1 per page

Setting the Stereo Out and Bus Out 1–8 from the Display

01V96i—Reference Manual

Bus Outs

EQ’ing the Stereo Out and Bus

Outs

To set the EQ for the Stereo Out and Bus Out 1–8 EQ, press

the DISPLAY ACCESS [EQ] button, then press the [F1] but-

ton to display the EQ | EQ Edit page, and use the [SEL] but-

tons to select the Stereo Out or Bus Out 1–8.

The parameters on this page (and the procedure for setting

them) are the same as for Input Channels (see page 21). Note

that the Stereo Out does not feature the STEREO LINK

parameter.

Routing Bus Out 1–8 Signals to

the Stereo Bus

You can patch Bus Out 1–8 signals to Outputs and Slot, as well

as to the Stereo Bus. You can adjust the level and pan settings

of the signals routed to the Stereo Bus for each bus. This is

convenient when you wish to use Bus Outs (1–8) as a Group

Bus.

To patch the Bus Out 1–8 signals to the Stereo Bus, press the

DISPLAY ACCESS [PAN/ROUTING] button repeatedly to

display the Pan/Route | Bus to St page.

Move the cursor to the desired parameter you wish to change,

then rotate the Parameter wheel or press the [INC]/[DEC]

buttons to modify the setting.

TO ST PAN

These controls pan the Bus Out 1–8 signals between the

left and right Stereo Out buses.

TO ST ON/OFF

These buttons turn on and off the Bus Out 1–8 to the Ste-

reo Bus routing.

TO ST Faders

These faders set the Bus Out 1–8 to Stereo Bus levels.

Viewing the Stereo Out and Bus

Out Settings

You can view and adjust parameter settings for the cur-

rently-selected Stereo Out or Bus Out on the View | Parameter

and Fader pages.

■

Viewing the Compressor and EQ

Settings

To display the View | Parameter page, use the corresponding

[SEL] button to select the desired bus, then press the DIS-

PLAY ACCESS [VIEW] button, then press the [F1] button.

The parameters on this page (and the procedure for setting

them) are the same as for Input Channels, except for the fol-

lowing items:

•

The Stereo Out and Bus Out 1–8 Parameter pages do not

contain the Gate and Phase parameters.

•

The Stereo Out Parameter page does not contain the Pair

parameter.