Yamaha 01V96i Reference Manual - Page 40
Viewing Aux Send Settings for Multiple Channels
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
40 Aux Outs Note: • Do not raise the level of the Aux Sends (patched to the effects processor) on the effects return channels. • For example, by default, Aux 1 is routed to the input of the internal Effects processor 1, and L and R of ST IN Channel 1 are patched to the processor's output. Under these conditions, if you raise the level of the send signals from ST IN Channel 1 to Aux 1, the signals are returned to ST IN Channel 1, creating a signal loop and possibly damaging your speakers. Viewing Aux Send Settings for Multiple Channels You can view and set parameters for all Aux Send 1-8, including setting levels and Pre/Post parameters. This is convenient when you wish to visually check all Aux Send settings or simultaneously adjust the levels of certain channels routed to Aux 1-8. 1. Press one of the FADER MODE [AUX 1]-[AUX 8] buttons repeatedly until the page listed below that contains the desired channels appears. • View1-16 page This page displays the Aux Send levels of Input Channels 1-16. • View17-STI page This page displays the Aux Send levels of Input Channels 17-32 and ST IN Channels 1-4. These pages display the source Input channels and the corresponding Aux Sends in a matrix. The parameters on these two pages (and the procedure for setting them) are the same. 2 1 01V96i-Reference Manual 3 1 DISPLAY Use the following buttons to display the desired parameters. • LEVEL Select the LEVEL button to display Send level bar graphs for Input Channels routed to Aux 1-8. • PRE/POST Select the PRE/POST button to display signal source points for Input Channels routed to Aux 1-8. 2 FIX/VARI These buttons indicate the Aux mode (Fixed or Variable) for Aux Out 1-8 and are only for display purposes.
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/40.png)