Yamaha 01V96i Reference Manual - Page 56

Surround Panning

Get Yamaha 01V96i PDF manuals and user guides View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

56 Surround Pan Surround Panning You can set the surround pan parameters for each Input Channel. 1. Make sure that the 01V96i is in any Surround mode except Stereo, then press the [SEL] button of the channel for which you want to set surround pan. 2. Press the DISPLAY ACCESS [PAN/ROUTING] button repeatedly until the Pan/Route | Ch Edit page appears. The Ch Edit page displays the selected Input Channel, and its surround pan setting and available pair partner. The following display page is an example in 6.1 Surround mode. 23 1 4 5 6 7 98 The following parameters are available on this page: 1 Surround pan graph This graph indicates the pan positions in a two-dimensional field, with the listening position in the center. A small diamond ( ) indicates the current surround pan position. You can move the current surround pan position ( ) directly to one of the speaker icons by selecting its icon, then pressing [ENTER]. 2 Trajectory patterns These buttons represent seven trajectory patterns that determine how the surround pan moves when you operate the Parameter wheel or the [INC]/[DEC] buttons. 3 FAST Turning on this button increases the speed of sound images panned via the Parameter wheel. 4 Trajectory pattern parameters These parameters fine-tune the surround pan trajectory pattern. • WIDTH ............This parameter sets the left-to-right width of the selected trajectory pattern. • DEPTH This parameter sets the front-to-rear width of the selected trajectory pattern. • OFFSET ............This parameter offsets the left-to-right direction of the selected trajectory pattern. • OFFSET ............This parameter offsets the front-to-rear direction of the selected trajectory pattern. 5 LFE This parameter control sets the level of the LFE (Low Frequency Effects) Channel signal routed to the subwoofer, and appears only in 5.1 and 6.1 Surround modes. 6 F/R In 6.1 Surround mode, F and R parameter controls appear. The F parameter control determines how the Front Center signal is fed to the Left and Right channels, and the R parameter control determines how the rear surround signal is fed to the Left and Right surround channels. 6 DIV This parameter control, instead of the F/R parameter control, appears in 3-1 or 5.1 Surround mode, and determines how the Center signal is fed to the Left, Right, and Center channels. It is expressed as a percentage ranging from 0 to 100%. When you set the parameter to 100, the Center signal is fed to only the Center channel. When you set the parameter to 0, the Center signal is fed to only the Left and Right channels. When you set the parameter to 50, the Center signal is fed equally to the Left, Right, and Center channels. 7 LINK This button is available only in 6.1 Surround mode. When you turn on this button, the F and R controls are set to the same value, and linked together. 8 ST LINK Turning on this button links the surround pan parameters of two Input Channels that are currently displayed on the page (Stereo Link function). You can link the surround pan parameters of two channels regardless of whether they are paired. 9 PATTERN When Input Channels are linked by the Stereo Link function, the seven patterns selectable here determine how the linked surround pan moves via the Parameter wheel and the [INC]/[DEC] buttons. 01V96i-Reference Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
56
Surround Pan
01V96i—Reference Manual
Surround Panning
You can set the surround pan parameters for each Input
Channel.
1.
Make sure that the 01V96i is in any Surround
mode except Stereo, then press the [SEL] but-
ton of the channel for which you want to set
surround pan.
2.
Press the DISPLAY ACCESS [PAN/ROUTING]
button repeatedly until the Pan/Route | Ch
Edit page appears.
The Ch Edit page displays the selected Input Channel,
and its surround pan setting and available pair partner.
The following display page is an example in 6.1 Surround
mode.
The following parameters are available on this page:
1
Surround pan graph
This graph indicates the pan positions in a two-dimen-
sional field, with the listening position in the center. A
small diamond (
) indicates the current surround pan
position. You can move the current surround pan posi-
tion (
) directly to one of the speaker icons by select-
ing its icon, then pressing [ENTER].
2
Trajectory patterns
These buttons represent seven trajectory patterns that
determine how the surround pan moves when you oper-
ate the Parameter wheel or the [INC]/[DEC] buttons.
3
FAST
Turning on this button increases the speed of sound
images panned via the Parameter wheel.
4
Trajectory pattern parameters
These parameters fine-tune the surround pan trajectory
pattern.
•
WIDTH
............
This parameter sets the left-to-right
width of the selected trajectory pat-
tern.
•
DEPTH
.............
This parameter sets the front-to-rear
width of the selected trajectory pat-
tern.
•
OFFSET
............
This parameter offsets the
left-to-right direction of the selected
trajectory pattern.
•
OFFSET
............
This parameter offsets the
front-to-rear direction of the
selected trajectory pattern.
5
LFE
This parameter control sets the level of the LFE (Low Fre-
quency Effects) Channel signal routed to the subwoofer,
and appears only in 5.1 and 6.1 Surround modes.
6
F/R
In 6.1 Surround mode, F and R parameter controls
appear. The F parameter control determines how the
Front Center signal is fed to the Left and Right channels,
and the R parameter control determines how the rear sur-
round signal is fed to the Left and Right surround chan-
nels.
6
DIV
This parameter control, instead of the F/R parameter
control, appears in 3-1 or 5.1 Surround mode, and deter-
mines how the Center signal is fed to the Left, Right, and
Center channels. It is expressed as a percentage ranging
from 0 to 100%. When you set the parameter to 100, the
Center signal is fed to only the Center channel. When you
set the parameter to 0, the Center signal is fed to only the
Left and Right channels. When you set the parameter to
50, the Center signal is fed equally to the Left, Right, and
Center channels.
7
LINK
This button is available only in 6.1 Surround mode. When
you turn on this button, the F and R controls are set to the
same value, and linked together.
8
ST LINK
Turning on this button links the surround pan parame-
ters of two Input Channels that are currently displayed on
the page (Stereo Link function). You can link the sur-
round pan parameters of two channels regardless of
whether they are paired.
9
PATTERN
When Input Channels are linked by the Stereo Link func-
tion, the seven patterns selectable here determine how the
linked surround pan moves via the Parameter wheel and
the [INC]/[DEC] buttons.
1
2
3
5
4
6
9
7
8