Yamaha 01V96i Reference Manual - Page 36
Aux Outs, Aux Out 1–8, Setting Aux Out 1–8 from the Display, Setting Aux Out 1-8 from, the Display
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
36 Aux Outs Aux Outs This chapter describes how to control Aux Out 1-8. Aux Out 1-8 The Aux Out 1-8 section mixes signals routed from the Input Channels to the corresponding Aux Sends, processes them using on-board EQ, compressor, etc., then routes them to the specified internal effects processors, output connectors or I/O card connectors. The 01V96i features eight Aux Sends, which can be used to send signals to the internal and external effects processors and monitors. The following diagram illustrates the Aux Out 1-8 signal flow. (Gain Reduction) (Out Meter) METER METER COMP INSERT ATT METER 4BAND EQ INSERT ON INSERT LEVEL OUTPUT DELAY METER AUX 1(...8) Setting Aux Out 1-8 from the Display To set Aux Out 1-8 parameters, you can either move the cursor to the desired parameter on the screen and change the value, or operate the desired button or control on the top panel. This section explains how to set the parameters on the screen. Tip: Refer to "Input & Output Patching" on page 43 for more information on how to set inserts. Attenuating Aux Outs To attenuate Aux Out 1-8 signals, press the [EQ] button, then press the [F4] button to display the EQ | Out Att page. AUX 1 AUX 8 OUTPUT PATCH • INSERT • ATT (Attenuator) • 4 BAND EQ (4-band equalizer) • COMP (Compressor) • ON (On/Off) • LEVEL • OUTPUT DELAY (Output delay) • METER These parameters are the same as the Stereo Out and Bus Out 1-8 (see page 29). Tip: You can also pair adjacent odd-even Aux Sends (in this order) for stereo Aux operation. Note: With the default setting, Aux Out 1-4 are patched to OMNI OUT connectors 1-4 and to internal Effects processors 1-4. However, you can change this patching on the Patch | Output page. The parameters on this page (and the procedure for setting them) are the same as for Input Channels (see page 20). 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/36.png)