Yamaha 01V96i Reference Manual - Page 65
Inserting the Internal Effects into Channels, AUX1-8, INS CH1-32, INS BUS1-8, INS ST-L/R, CH1-32 - case
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Internal Effects Inserting the Internal Effects into Channels 65 3. To select a signal to be input to the effects processor, move the cursor to the desired In parameter box, select a signal from the following options, then press [ENTER No assignment • AUX1-8 Aux Sends 1-8 • INS CH1-32........... Input Channel 1-32 Insert Out • INS BUS1-8........... Bus 1-8 Insert Out • INS AUX1-8 .......... Aux Send 1-8 Insert Out • INS ST-L/R Stereo Out Insert Out To use the internal effects processors via Aux Sends, select Aux 1-8 (in most cases). You can patch a different signal to the other input of 2-in/2-out effect programs. Tip: • You can patch a signal to multiple effect inputs. • Move the cursor to an IN parameter box and press the [ENTER] button. The Patch Select window appears. This window enables you to select the input source quickly. 4. To patch a signal output from the effects pro- cessor, move the cursor to the desired OUT parameter box, select the signal destination from the following options, then press [ENTER No assignment • CH1-32 Input Channels 1-32 • ST IN 1L-ST IN 4R ST IN Channels 1L-4R • INS CH1-32 Input Channel Insert In • INS BUS1-8 Bus 1-8 Insert In • INS AUX1-8 Aux 1-8 Insert In • INS ST-L & INS ST-R.........Stereo Bus Insert In To use the internal effects processors via Aux Sends, select CH 1-32 or ST IN 1-4 (in most cases). The channels you assign here will become the effects return channels. You can patch a different channel to the other output of a 1-in/2-out or 2-in/2-out effect program to create stereo effects. Tip: • If you select an ST IN Channel as the destination, you can patch the L and R channel signals separately. • You can also use the Patch Select window to set the OUT parameter boxes, as explained in Step 3. • The number of inputs available for each effect varies depending on the type of effect programs initially recalled. Note: You cannot select a channel as the destination of multiple effect signals. If you select a channel that is already selected in another OUT parameter box, that OUT parameter box switches its indicator to "-" (not assigned). 5. Adjust the level of Aux Sends patched to the effects processor. Refer to "Aux Outs" on page 36 for information on setting the Aux Sends. Note: Do not raise the level of the Aux Sends (patched to the effects processor's input) on the effects return channels. Otherwise, the signal will return to the same channel, creating a signal loop and possibly damaging your speakers. Tip: Use the Master layer fader to adjust the final Aux Send output level. At this time, you can view the level on the Meter | Master page. 6. Adjust the level, pan, and EQ of the Input Channels patched to the effect outputs. Tip: To mix the effects sound returned via the Aux sends with the original dry sound, set the effect's MIX BALANCE parameter to 100% (only the effects sound will be output). Inserting the Internal Effects into Channels You can insert the internal effects into certain Input Channels or Output Channels (Bus 1-8, Aux Bus 1-8, or the Stereo Bus). Note: • You cannot use Insert In and Out for ST IN Channels. • If effects are inserted in channels, you cannot use those effects via Aux Sends or insert them into other channels. 1. Select an internal Effects processor (1-4), then recall the desired effect programs. 2. Press the [SEL] button of the Input Channel or Output Channel into which you want to insert the selected effects. Tip: Repeatedly pressing the STEREO [SEL] button toggles between the left and right Stereo Bus channels. 3. Press the DISPLAY ACCESS [ /INSERT/DELAY] button repeatedly until the /Ins/Dly | Insert page appears. 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/65.png)