Yamaha 01V96i Reference Manual - Page 43
Input & Output Patching, Input Patching
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Input & Output Patching Input & Output Patching 43 Input & Output Patching This chapter describes how to patch (assign) signal paths within the 01V96i to its inputs, outputs, and slot channels Input Patching Follow the steps below to change the Input Patch. 1. Press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch | In Patch page appears. Input Patching Signals input at INPUT connectors 1-16, ADAT IN connector, 2TR IN DIGITAL connectors, and Slot I/O card are patched to Input Channels for use. Patch example: INPUT connector 1 INPUT connector 2 INPUT connector 3 INPUT connector 4 INPUT connector 5 INPUT connector 6 INPUT connector 7 INPUT connector 8 Input Patching Input Channel 1 Input Channel 2 Input Channel 3 Input Channel 4 Input Channel 5 Input Channel 6 Input Channel 7 Input Channel 8 By default, the Input Channels are patched as follows: Input Channels 1-16 17-24 25-32 ST IN Channels 1-4 Input connectors and Slot channels INPUT connectors 1-16 ADAT IN Input Channels 1-8 Slot Channels 1-8 Internal Effects Processor 1-4 Outputs 1-2 You can change these patches, if you desire. 1 Inputs, ADAT IN channels, TO HOST USB channels, and slot channels that are currently assigned to Input Chan- nels are shown in the parameter boxes (1) below the channel numbers. The parameter indicators are explained below: Parameter value Description - No assignment AD1-AD16 INPUT connectors 1-16 ADAT1-ADAT8 ADAT IN Input Channels 1-8 SL-01-SL-16 Slot Channels 1-16 FX1-1 & FX1-2 Outputs 1 & 2 of Internal Effects Processor 1 FX2-1 & FX2-2 Outputs 1 & 2 of Internal Effects Processor 2 FX3-1 & FX3-2 Outputs 1 & 2 of Internal Effects Processor 3 FX4-1 & FX4-2 Outputs 1 & 2 of Internal Effects Processor 4 2TD-L & 2TD-R 2TR DIGITAL IN (L/R) USB1-USB16 TO HOST USB port input channels 1-16 2. Move the cursor to an input patch parameter you wish to change, then rotate the Parameter wheel or press the [INC]/[DEC] buttons to modify the patching. 1 2 The long name of the currently-selected channel is indi- cated in the upper-right corner of the screen (1). Below the channel name is the long name of the selected input channel (2). (See page 28 for information on changing channel names.) 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/43.png)