Yamaha 01V96i Reference Manual - Page 87

Pro Tools Remote Layer

87

01V96i—Reference Manual

Remote Control

Control Surface Operation

When the Pro Tools Remote layer is selected, the 01V96i con-

trols on the top panel engage the following functions:

■

Channel Strip section

•

[SEL] buttons

These buttons select Pro Tools channels, inserts, and

Automation mode.

•

[SOLO] buttons

These buttons solo Pro Tools channels. The button indi-

cators for the soloed channels light up.

•

[ON] buttons

These buttons mute Pro Tools channels.

• Faders

The faders set Pro Tools channel levels, including the

audio tracks, MIDI tracks, master fader, Aux Ins, etc. If 16

or fewer channels are displayed in Pro Tools, faders are

assigned starting from the left-most channel.

■

FADER MODE Section

•

[AUX 1]–[AUX 5] buttons

These buttons select Sends A–E so that you can adjust the

corresponding Pro Tools channel send level.

•

[AUX 6] button

Press and hold down this button and press the desired

[SEL] button to reset the corresponding channel fader

level.

Move the cursor to the parameter control on the display,

then press and hold down this button and press [ENTER]

to reset the corresponding channel panpot to center.

While you are holding down the [AUX 6] button, the

SELECT ASSIGN parameter indicates “DFLT.”

•

[AUX 7] button

When this button is turned on, you can adjust the selected

channel panpot using the SELECTED CHANNEL [PAN]

control. If you turn on this button while a Channel Dis-

play mode page is selected, you can adjust each channel

panpot using parameter controls 1–16.

To adjust the stereo channel panpots, press this button

repeatedly to toggle between L and R channels.

•

[AUX 8] button

Use this button along with the desired [SEL] button to

assign a plug-in to the corresponding Pro Tools channel

(see page 90).

•

[HOME] button

This button turns Flip mode (see page 90) on or off. Flip

mode enables you to adjust the Aux Send parameters

using the faders, [ON] buttons, and the [PAN] control.

■

DISPLAY ACCESS section

•

[PAIR/GROUP] button

Press this button while a Channel Display mode or Meter

Display mode page is selected to display a Group ID to

which each channel belongs.

•

[EFFECT] button

Press this button to display or hide the Insert window in

Pro Tools.

■

Display section

•

[F1] button

Press this button to reset the Clipping and Peak Hold

indicators on Meter Display mode pages.

•

Tab Scroll buttons ([

]/[

])

These buttons switch the INSERT ASSIGN/EDIT param-

eter settings on Insert Display mode pages.

■

Data Entry section

•

[ENTER] button

This button switches the on/off status of the buttons on

the display.

•

Left, Right, Up, Down ([

]/[

]/[

]/[

]) cursor

buttons

These buttons move the cursor on the display.

•

[INC] & [DEC] buttons

The [INC] button works the same as the Enter key on

your computer keyboard. The [DEC] button works the

same as the Esc key on your computer keyboard.

•

Parameter wheel

The Parameter wheel enables you to adjust the cur-

rently-selected parameter, or execute the shuttle and

scrub operation. By default, it adjusts the value of the cur-

rently-selected parameter (The P.WHEEL MODE

parameter indicates “Prm.”).

■

USER DEFINED KEYS section

•

[1]–[8] buttons

You can assign one of 194 parameters to each of these but-

tons. In particular, if you assign any of 54 Remote Control

parameters to these buttons, you can operate the trans-

port section and select various Pro Tools modes from the

01V96i top panel. For more information on assigning

functions to keys, refer to “Using the User Defined Keys”

in the Owner’s Manual (separate booklet).

Parameter

Function

DAW REC

Places Pro Tools in Record Enabled

mode. The button indicator flashes

while the transport section is

stopped. The indicator lights up

when recording starts.

DAW PLAY

Starts playback from the current cur-

sor position.

DAW STOP

Stops playback and recording.

DAW FF

Fast forwards the cursor position.

Section	Page
How to Use This Reference Manual	1
Contents	2
Contents of the Owner’s Manual (Booklet)	3
Function Tree	4
Control Surface & Rear Panel	6
Control Surface	6
Rear Panel	10
Analog I/O & Digital I/O	12
Analog Inputs & Outputs	12
Digital Inputs & Outputs	13
Converting Sampling Rates of Signals Received at I/O Card Inputs	14
Monitoring Digital Input Channel Status	14
Dithering Digital Outputs	15
Setting the Transfer Format for Higher Sampling Rates	16
Input Channels	17
About Input Channels	17
Setting the Input Channels from the Display	18
Setting the Input Channels from the Control Surface	25
Pairing Input Channels	26
Naming Input Channels	28
Bus Outs	29
About Stereo Out	29
Bus Out 1–8	29
Setting the Stereo Out and Bus Out 1–8 from the Display	30
Setting the Stereo Out and Bus Out 1–8 from the Control Surface	33
Pairing Buses or Aux Sends	33
Attenuating Output Signals	34
Naming the Stereo Out and Bus Outs	35
Aux Outs	36
Aux Out 1–8	36
Setting Aux Out 1–8 from the Display	36
Setting Aux Out 1–8 from the Control Surface	38
Setting Aux Send Levels	38
Viewing Aux Send Settings for Multiple Channels	40
Panning Aux Sends	41
Copying Channel Fader Positions to Aux Sends	42
Input & Output Patching	43
Input Patching	43
Output Patching	44
Patching Direct Outs	46
Insert Patching	47
Monitoring	49
Monitor	49
Monitor and Solo Setup	49
Using the Monitor	50
Using the Solo Function	51
Surround Pan	52
About Surround Pan	52
Setting Up and Selecting Surround Pan Modes	53
Surround Panning	56
Grouping Channels & Linking Parameters	59
Grouping & Linking	59
Using Fader Groups and Mute Groups	59
Using Fader Group Master	61
Using Mute Group Master	62
Linking EQ and Compressor Parameters	62
Internal Effects	64
About the Internal Effects	64
Using Effects Processors via Aux Sends	64
Inserting the Internal Effects into Channels	65
Editing Effects	66
About Add-On Effects	67
About Plug-Ins	67
Scene Memories	68
About Scene Memories	68
What is Stored in a Scene?	68
About Scene Numbers	68
Storing and Recalling Scenes	69
Auto Scene Memory Update	70
Fading Scenes	71
Recalling Scenes Safely	72
Sorting Scenes	72
Copying and Pasting a Scene (Global Paste)	73
Libraries	74
About the Libraries	74
General Library Operation	74
Using Libraries	75
Remote Control	83
About Remote Function	83
Pro Tools Remote Layer	83
Nuendo/Cubase Remote Layer	93
Other DAW Remote Layer	94
MIDI Remote Layer	94
Machine Control Function	98
MIDI	100
MIDI & the 01V96i	100
MIDI Port Setup	101
Assigning Scenes to Program Changes for Remote Recall	103
Assigning Parameters to Control Changes for Real-time Control	104
Controlling Parameters by Using Parameter Changes	106
Transmitting Parameter Settings via MIDI (Bulk Dump)	107
Other Functions	109
Setting Preferences	109
Creating a Custom Layer by Combining Channels (User Assignable Layer)	110
Cascading Consoles	111
Checking the Battery and the System Version	113
Calibrating the Faders	113
Index	115
Appendix: Parameter Lists	119
USER DEFINED KEYS	119
USER DEFINED KEYS Initial Assignments	121
Input Patch Parameters	121
Initial Input Patch Settings	123
Output Patch Parameters	125
Initial Output Patch Settings	127
User Defined Remote Layer Initial Bank Settings	128
Effects Parameters	132
Effects and tempo synchronization	146
Preset EQ Parameters	147
Preset Gate Parameters (fs = 44.1 kHz)	148
Preset Compressor Parameters (fs = 44.1 kHz)	149
Dynamics Parameters	151
Appendix: MIDI	156
Scene Memory to Program Change Table	156
Initial Parameter to Control Change Table	157
MIDI Data Format	173

Yamaha 01V96i Reference Manual - Page 87

Control Surface Operation, Channel Strip FADER MODE DISPLAY ACCESS

Page 87 highlights