Yamaha 01V96i Reference Manual - Page 45
Patching the USB Outputs, Patching the 2TR Digital, Outputs
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Input & Output Patching Output Patching 45 3. Press [ENTER] to confirm the change. Tip: You can store the Output Patch settings to the Output Patch library. Refer to "Libraries" on page 74 for more information. Patching the USB Outputs By default, the following output signals are assigned to USB OUT. Outputs USB OUT1-8 USB OUT9-16 Signals Bus Out 1-8 signals Bus Out 1-8 signals If you want to change or verify this patching, proceed as follows. 1. Press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch | USB Out page appears. Patching the 2TR Digital Outputs Follow the steps below to change the signal path patched to the 2TR OUT DIGITAL connector. 1. Press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch | 2TR Out page appears. Signals assigned on the Out Patch page can also be assigned on this page. 2. Move the cursor to a patch parameter you wish to change, then rotate the Parameter wheel or press the [INC]/[DEC] buttons to modify the patching. 3. Press [ENTER] to confirm the change. The parameter boxes underneath each number indicate the currently-assigned signal routing. The meaning of these indicators are explained below. Parameter value - BUS1-BUS8 AUX1-AUX8 ST L/R INS CH1-INS CH32 INS BUS1-INS BUS8 INS AUX1-INS AUX8 INS ST-L/ST-R Description No assignment Bus Out 1-8 signals Aux Out 1-8 signals Stereo Out signals Input Channels 1-32 Insert Outs Bus Out 1-8 Insert Outs Aux Out 1-8 Insert Outs Stereo Out Insert Outs 2. Move the cursor to a parameter box, and use the Parameter wheel (or [INC]/[DEC]) to modify the patching. 3. Press [ENTER] to confirm the change. 01V96i-Reference Manual