Yamaha 01V96i Reference Manual - Page 32
Viewing Faders and Other, Parameters, ON/OFF, Fader, BUS ON/OFF, BUS Fader, TO ST PAN, TO ST ON/OFF
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
32 Bus Outs ■ Viewing Faders and Other Parameters To display the View | Fader page, use the corresponding [SEL] button to select the desired bus, then press the DISPLAY ACCESS [VIEW] button, then press the [F2] button. The Fader page layouts for Stereo Out and Bus Out 1-8 are slightly different. Stereo Out Fader page 12 Bus Out (1-8) Fader page 12 3 45 3 1 BAL This control adjusts the level balance between the L and R channels of the Stereo Out. 2 ON/OFF This button turns the Stereo Out on or off, and links with the [ON] button in the STEREO section. 3 Fader This fader adjusts the Stereo Out output levels, and links with the [STEREO] fader. The fader knob is highlighted when the fader is set to 0.0 dB. 1 BUS ON/OFF This button turns the currently-selected Bus Out (1-8) on or off, and links with the [ON] (9-16) button in the Master layer. 2 BUS Fader This fader sets the currently-selected Bus Out (1-8) level, and links with the fader (9-16) in the Master layer. The fader knob is highlighted when the fader is set to 0.0 dB. 3 TO ST PAN This control sets the Bus Out to Stereo Out Pan position for the currently-selected Bus Out (1-8). 4 TO ST ON/OFF This button turns on or off the Bus Out to Stereo Out signal for the currently-selected Bus Out (1-8). 5 TO ST Fader This fader sets the Bus Out to Stereo Out signal level for the currently-selected Bus Out (1-8). Tip: The TO ST PAN, ON/OFF, and TO ST Fader parameters also appear on the Pan/Route | Bus to St page. 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/32.png)