Yamaha 01V96i Reference Manual - Page 13

Digital Inputs & Outputs

13

01V96i—Reference Manual

Analog I/O & Digital I/O

Output Section

The 01V96i top and rear panels feature output connectors

that enable you to connect a monitoring system, effects pro-

cessors and other line-level devices.

•

MONITOR OUT connectors L/R

These balanced TRS-type phone con-

nectors output monitoring signals or

input signals routed from the 2TR IN

connectors. The nominal output level

is +4 dB.

Use the Monitor source selector in the Monitor Out &

Headphones section to select the signal output from these

connectors.

•

OMNI OUT connectors 1–4

These balanced

TRS-type phone con-

nectors output any Bus

Outs or Input Channel

Direct Outs. The nomi-

nal output level is +4 dB.

•

STEREO OUT connectors L/R

These balanced XLR-3-32-type

connectors output the Stereo Out

signals. The nominal output level

is +4 dB.

•

2TR OUT connectors

These unbalanced RCA phono con-

nectors output line-level signals to a

connected recorder or other external

device. These connectors always out-

put the Stereo Out signals.

Digital Inputs & Outputs

The 01V96i rear panel features digital input and output con-

nectors that enable you to connect external digital devices.

Any signal path can be patched to these digital inputs and

outputs.

You can also add analog and digital I/Os by installing an

optional I/O card in the slot.

Digital I/O Connectors

•

2TR IN DIGITAL connector

2TR IN DIGITAL is an RCA phono connector

and accepts consumer format (IEC 60958)

digital audio. You can patch digital signals

input at this connector to any Input Channel

(page 43).

•

2TR OUT DIGITAL connector

This RCA phono connector outputs con-

sumer format (IEC 60958) digital audio. You

can patch any Bus outs or Input channel

Direct Outs to this output (page 45).

•

ADAT IN connector

This TOSLINK connector accepts 8-channel ADAT opti-

cal format signals, which can be patched to any Input

Channel (page 43).

•

ADAT OUT connector

This TOSLINK connector outputs an 8-channel ADAT

optical format signal. You can patch any Bus Outs or

Input Channel Direct outs to this output (page 44).

SLOT

This slot allows you to install an optional mini-YGDAI

(Yamaha General Digital Audio Interface) I/O card. This card

offers AD/DA conversion, and various analog I/O options

and digital I/O interfaces in all the popular digital audio inter-

connect formats, including AES/EBU, ADAT, and Tascam.

You can patch signals input at these card connectors to any

Input Channels or Insert Ins (see page 43).

You can patch the card outputs to Bus Outs or Input Channel

Direct Outs (see page 46).

For details on the mini-YGDAI I/O cards that are currently

usable, refer to “I/O Slot Specifications” in the Owner’s Man-

ual.

For the latest information about mini-YGDAI I/O cards, refer

to the Yamaha Professional Audio website.

http://www.yamahaproaudio.com/

Tip:

Any signal path can be patched to the OMNI OUT con-

nectors. (See page 44 for more information on patching sig-

nals to the OMNI OUT connectors.)

L

R

IN

OUT

2TR

-10dBV

(UNBAL)

Section	Page
How to Use This Reference Manual	1
Contents	2
Contents of the Owner’s Manual (Booklet)	3
Function Tree	4
Control Surface & Rear Panel	6
Control Surface	6
Rear Panel	10
Analog I/O & Digital I/O	12
Analog Inputs & Outputs	12
Digital Inputs & Outputs	13
Converting Sampling Rates of Signals Received at I/O Card Inputs	14
Monitoring Digital Input Channel Status	14
Dithering Digital Outputs	15
Setting the Transfer Format for Higher Sampling Rates	16
Input Channels	17
About Input Channels	17
Setting the Input Channels from the Display	18
Setting the Input Channels from the Control Surface	25
Pairing Input Channels	26
Naming Input Channels	28
Bus Outs	29
About Stereo Out	29
Bus Out 1–8	29
Setting the Stereo Out and Bus Out 1–8 from the Display	30
Setting the Stereo Out and Bus Out 1–8 from the Control Surface	33
Pairing Buses or Aux Sends	33
Attenuating Output Signals	34
Naming the Stereo Out and Bus Outs	35
Aux Outs	36
Aux Out 1–8	36
Setting Aux Out 1–8 from the Display	36
Setting Aux Out 1–8 from the Control Surface	38
Setting Aux Send Levels	38
Viewing Aux Send Settings for Multiple Channels	40
Panning Aux Sends	41
Copying Channel Fader Positions to Aux Sends	42
Input & Output Patching	43
Input Patching	43
Output Patching	44
Patching Direct Outs	46
Insert Patching	47
Monitoring	49
Monitor	49
Monitor and Solo Setup	49
Using the Monitor	50
Using the Solo Function	51
Surround Pan	52
About Surround Pan	52
Setting Up and Selecting Surround Pan Modes	53
Surround Panning	56
Grouping Channels & Linking Parameters	59
Grouping & Linking	59
Using Fader Groups and Mute Groups	59
Using Fader Group Master	61
Using Mute Group Master	62
Linking EQ and Compressor Parameters	62
Internal Effects	64
About the Internal Effects	64
Using Effects Processors via Aux Sends	64
Inserting the Internal Effects into Channels	65
Editing Effects	66
About Add-On Effects	67
About Plug-Ins	67
Scene Memories	68
About Scene Memories	68
What is Stored in a Scene?	68
About Scene Numbers	68
Storing and Recalling Scenes	69
Auto Scene Memory Update	70
Fading Scenes	71
Recalling Scenes Safely	72
Sorting Scenes	72
Copying and Pasting a Scene (Global Paste)	73
Libraries	74
About the Libraries	74
General Library Operation	74
Using Libraries	75
Remote Control	83
About Remote Function	83
Pro Tools Remote Layer	83
Nuendo/Cubase Remote Layer	93
Other DAW Remote Layer	94
MIDI Remote Layer	94
Machine Control Function	98
MIDI	100
MIDI & the 01V96i	100
MIDI Port Setup	101
Assigning Scenes to Program Changes for Remote Recall	103
Assigning Parameters to Control Changes for Real-time Control	104
Controlling Parameters by Using Parameter Changes	106
Transmitting Parameter Settings via MIDI (Bulk Dump)	107
Other Functions	109
Setting Preferences	109
Creating a Custom Layer by Combining Channels (User Assignable Layer)	110
Cascading Consoles	111
Checking the Battery and the System Version	113
Calibrating the Faders	113
Index	115
Appendix: Parameter Lists	119
USER DEFINED KEYS	119
USER DEFINED KEYS Initial Assignments	121
Input Patch Parameters	121
Initial Input Patch Settings	123
Output Patch Parameters	125
Initial Output Patch Settings	127
User Defined Remote Layer Initial Bank Settings	128
Effects Parameters	132
Effects and tempo synchronization	146
Preset EQ Parameters	147
Preset Gate Parameters (fs = 44.1 kHz)	148
Preset Compressor Parameters (fs = 44.1 kHz)	149
Dynamics Parameters	151
Appendix: MIDI	156
Scene Memory to Program Change Table	156
Initial Parameter to Control Change Table	157
MIDI Data Format	173

Yamaha 01V96i Reference Manual - Page 13

Digital Inputs & Outputs, Output Digital I/O Connectors

Page 13 highlights