Yamaha 01V96i Reference Manual - Page 97
When SW is assigned, To change the channel name, move the cur
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Remote Control MIDI Remote Layer 97 Tip: If "SW" is not assigned in the DATA parameter boxes of the ON section, the current MIDI messages are output. Note: Be sure to set one of the DATA parameter boxes of the FADER section to "FAD." If no "FAD" is assigned, fader operation is ignored. 9. Move the cursor to the LATCH/UNLATCH but- ton, then press [ENTER] to select LATCH or UNLATCH depending on how you want the [ON] buttons to function. • LATCH Pressing the [ON] buttons repeatedly transmits alternating On and Off messages. • UNLATCH Pressing and holding down the [ON] buttons transmits On messages, and releasing the [ON] buttons transmits Off messages. Tip: Refer to the diagrams below for information on how the [ON] buttons behave when Latch or Unlatch is selected. ■ When "SW" is assigned: • LATCH MIDI data transmission (SW=7F) MIDI data transmission (SW=00) Off Illuminated Off ■ When "SW" is not assigned: • UNLATCH MIDI data transmission Off Illuminated Off Tip: In most situations, select Unlatch if SW is not assigned. 10. To change the channel name, move the cur- sor to the ID LONG parameter box, then press [ENTER] to display the Title Edit window. For more information on entering names, refer to "Title Edit Window" in the Owner's Manual (separate booklet). Tip: • Move the cursor to the INITIALIZE button, then press [ENTER]. A window is displayed that enables you to reset the parameter settings in the currently-selected bank. • You can also assign MIDI messages to the parameter boxes manually without using the LEARN button. • UNLATCH MIDI data transmission (SW=7F) MIDI data transmission (SW=00) Off Illuminated Off 01V96i-Reference Manual