ZyXEL NetAtlas User Guide - Page 166
Table 79
View all ZyXEL NetAtlas manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Chapter 13 System Configuration To open this screen, right-click on the OLT in the Device List Panel, and click Configuration > System Configuration > Time Setup. Figure 109 System Configuration > Time Setup The following table describes the labels in this screen. Table 79 System Configuration > Time Setup LABEL DESCRIPTION Use Time Server When Bootup Select the time service protocol that your time server sends when you start the device. Not all time servers support all protocols, so you may have to check with your ISP/network administrator or use trial and error to find a protocol that works. The main differences between them are the format. When you select the Daytime (RFC-867) format, the device displays the day, month, year and time with no time zone adjustment. When you use this format it is recommended that you use a Daytime timeserver within your geographical time zone. Time (RFC-868) format displays a 4-byte integer giving the total number of seconds since 1970/1/1 at 0:0:0. NTP (RFC-1305) is similar to Time (RFC-868). Time Server IP Address None is the default; enter the time manually. Enter the IP address of your time server. Check with your ISP/ network administrator if you are unsure of this information. 166 NetAtlas EPON Manager User's Guide