ZyXEL NetAtlas User Guide - Page 66

Chapter 5 View Table 24 View > Ethernet Status (continued) LABEL DESCRIPTION Polling The text box displays how often (in seconds) this screen refreshes. You may change the refresh interval by typing a new number in the text box and then clicking the Apply button. Port Index This field displays the index number. Interface Description This field displays the interface, for example ENet1 and ENet2. FCS Errors This field displays the number of frames received with Frame Check Sequence (FCS) errors. Single Collision This field displays the number of frames with 1 collision detected. Multiple Collision This field displays the number of frames with 2 to 15 collisions detected. SQE Test Errors This field displays the number of frames with Signal Quality Error (SQC) errors. Deferred Trans. This field displays the number of frames that were delayed due to deferred transmission. Late Collisions A late collision is counted when a device detects a collision after it has sent the 512th bit of its frame. This field displays the number of times such a collision is detected. Excessive Collisions This field displays the number of packets with in excess of 15 collisions detected. Mac Trans. Errors This field displays the number of packets with Internet MAC sublayer transmission error. Carrier Sense Err This field displays the number of times a carrier sense error occured. Frame Too Long This field displays the number of frames dropped because they were bigger than the maximum frame size. Mac Rec. Errors This field displays the number of frames received with MAC address errors. Ether Chipset This field identifies the Ethernet chipset used for the interface. Close Click Close to exit the screen. 5.2 Hardware Status View fan speeds, voltage levels and temperatures of a selected device in the Hardware Status screen. 66 NetAtlas EPON Manager User's Guide