ZyXEL NetAtlas User Guide - Page 179

Chapter 14 Switch Configuration Table 86 Switch Configuration > STP: (M)RSTP (continued) LABEL DESCRIPTION Tree Select which STP tree configuration this port should participate in. Apply Copy to... Close This field is available only when you select MRSTP in the Spanning Tree Protocol field. Click Apply to save your changes in this section. Click the Copy to.. button to copy the configuration from the device that you are currently configuring to other device(s) of the same model. Click Close to exit this screen. Figure 117 Switch Configuration > STP: MSTP The following table describes the labels in this screen. Table 87 Switch Configuration > STP: MSTP LABEL DESCRIPTION Spanning Tree Protocol You can activate one of the STP modes on the device. Select RSTP, MRSTP or MSTP. Apply Click Apply to save your changes back to the switch. Enable MSTP Select this option to activate MSTP. Hello Time (sec) This is the time interval in seconds between BPDU (Bridge Protocol Data Units) configuration message generations (by all devices in RSTP or the root device in STP). The allowed range is 1 to 10 seconds (2 is the default). NetAtlas EPON Manager User's Guide 179