ZyXEL NetAtlas User Guide - Page 208
ZyXEL NetAtlas Manual
View all ZyXEL NetAtlas manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
Chapter 15 Multicast Configuration 1 In the Multicast VLAN screen, click New... under Multicast VLAN. A screen displays as shown. Figure 133 Multicast Configuration > Multicast VLAN: New MVLAN 2 Select Active to enable this multicast VLAN setting. 3 In the Name field, enter a descriptive name (up to 32 ASCII characters) for identification purposes. 4 Specify a VLAN ID in the Multicast VLAN ID field. Enter a number between 1 and 4094. 5 In the Mode field, select Dynamic to send IGMP reports to all MVR source ports in the multicast VLAN. Select Compatible to set the switch not to send IGMP reports. 6 In the 802.1p Priority field, select a priority level (0-7) with which the switch replaces the priority in outgoing IGMP control packets (belonging to this multicast VLAN). 7 In the Source Port list box, select the MVR source port that sends and receives multicast traffic. 8 In the Receiver Port list box, select the port(s) that only receives multicast traffic. 208 NetAtlas EPON Manager User's Guide