ZyXEL NetAtlas User Guide - Page 212

Modifying Multicast Groups

Page 212 highlights

Chapter 15 Multicast Configuration 2 Select Active to enable this multicast VLAN setting. 3 In the Name field, enter a descriptive name (up to 20 ASCII characters) for identification purposes. 4 Specify a VLAN ID in the Service VLAN ID field. Enter a number between 1 and 4094. 5 In the Service VLAN Priority field, select a priority level (0-7) with which the OLT replaces the priority in outgoing IGMP control packets (belonging to this multicast VLAN). 6 In the Unknown DS Multicast Frame field, select Denied to discard the frame(s) or select Allowed to send the frame(s) to all ports when the OLT receives an unknown downstream multicast frame. 7 Click OK to save the settings and close this screen. Otherwise, click Cancel to discard the settings and close this screen. 8 A screen displays showing the configuration result. Click Close to exit the screen. Figure 138 Multicast Configuration > EPON Multicast VLAN: New MVLAN: Result 15.5.2 Modifying Multicast Groups Follow the steps below to change multicast group settings. 1 In the EPON Multicast VLAN screen, select one entry in the Multicast VLAN list table. 2 Select one entry in the Multicast Group list table and click Modify... under Multicast Group. 212 NetAtlas EPON Manager User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340

Chapter 15 Multicast Configuration
NetAtlas EPON Manager User’s Guide
212
2
Select
Active
to enable this multicast VLAN setting.
3
In the
Name
field, enter a descriptive name (up to 20 ASCII characters) for
identification purposes.
4
Specify a VLAN ID in the
Service VLAN ID
field. Enter a number between 1 and
4094.
5
In the
Service VLAN Priority
field, select a priority level (0-7) with which the
OLT replaces the priority in outgoing IGMP control packets (belonging to this
multicast VLAN).
6
In the
Unknown DS Multicast Frame
field, select
Denied
to discard the
frame(s) or select
Allowed
to send the frame(s) to all ports when the OLT
receives an unknown downstream multicast frame.
7
Click
OK
to save the settings and close this screen. Otherwise, click
Cancel
to
discard the settings and close this screen.
8
A screen displays showing the configuration result. Click
Close
to exit the screen.
Figure 138
Multicast Configuration > EPON Multicast VLAN: New MVLAN: Result
15.5.2
Modifying Multicast Groups
Follow the steps below to change multicast group settings.
1
In the
EPON Multicast VLAN
screen, select one entry in the
Multicast VLAN
list
table.
2
Select one entry in the
Multicast Group
list table and click
Modify...
under
Multicast Group
.