ZyXEL NetAtlas User Guide - Page 226
Static Route
View all ZyXEL NetAtlas manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
Chapter 16 IP Configuration Table 110 IP Configuration > 2-Rate 3-Color Marker (continued) LABEL DESCRIPTION Peak Rate Specify the Peak Information Rate (PIR) for this port. DSCP/ Green Specify the DSCP value to use for packets with low packet loss priority. DSCP/ Yellow Specify the DSCP value to use for packets with medium packet loss priority. DSCP/Red Specify the DSCP value to use for packets with high packet loss priority. Apply Click Apply to save the changes in this section. Copy to... Click the Copy to.. button to copy the configuration from the device that you are currently configuring to the port(s) on the same device or the port(s) on other device(s) of the same model. Close Click Close to exit the screen. 16.4 Static Route Static routes tell the switch how to forward IP traffic when you configure the TCP/ IP parameters manually. 1 In the Device Panel list, right-click on a device. 2 Click Configuration > IP Configuration > Static Route. Figure 147 IP Configuration > Static Route 226 NetAtlas EPON Manager User's Guide