ZyXEL NetAtlas User Guide - Page 236

Chapter 17 RMON Configuration Table 119 RMON Configuration > Alarm > New (continued) LABEL DESCRIPTION Variable Click Browse to select the variable whose data is sampled. The following screen appears. Figure 155 RMON Configuration > Alarm > New > Browse Select the type, port and variable whose data will be sampled, and click OK. Sample Type Select the method of obtaining the sample value. Choices are Absolute Value and Delta Value. Startup Alarm Select the startup alarm type (Rising Alarm, Falling Alarm, Rising or Falling Alarm). Rising Threshold Specify a rising threshold (between 0 and 2147483647). When a value that is greater or equal to this threshold, the probe triggers an alarm. Rising Event Click Browse.. to select an index number of a rising event. Falling Threshold Specify the falling threshold (between 0 and 2147483647). When a value that is smaller or equal to this threshold, the probe triggers an alarm. Falling Event Click Browse.. to select an index number of a falling event. Owner Enter a descriptive name of the application that creates this entry. You can use 1-31 printable ASCII characters. Spaces are allowed. OK Click this to save the settings and close the screen. Cancel Click this to discard all changes and close the screen. 17.4.2 RMON Alarm Event Log Use this screen to display alarm logs. To open this screen, click Configuration > RMON Configuration > Alarm > Show Log. Figure 156 RMON Configuration > Alarm > Show Log 236 NetAtlas EPON Manager User's Guide