D-Link DGS-3324SR Product Manual - Page 121

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual Offset This field will instruct the Switch to mask the packet header beginning with the offset value specified: • value (0-15) - Enter a value in hex form to mask the packet from the beginning of the packet to the 15th byte. • value (16-31) - Enter a value in hex form to mask the packet from byte 16 to byte 31. • value (32-47) - Enter a value in hex form to mask the packet from byte 32 to byte 47. • value (48-63) - Enter a value in hex form to mask the packet from byte 48 to byte 63. • value (64-79) - Enter a value in hex form to mask the packet from byte 64 to byte 79. Click Apply to implement changes made. The page shown below is the IPv6 configuration window. Figure 6- 62. Access Profile Configuration (IPv6) window The following parameters can be set, for IP: Parameter Description Profile ID (1-8) Type in a unique identifier number for this profile set. This value can be set from 1 - 8. Type Select profile based on Ethernet (MAC Address), IP address, Packet Content Mask or IPv6. This will change the menu according to the requirements for the type of profile. • Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header. • Select IP to instruct the Switch to examine the IP address in each frame's header. • Select Packet Content Mask to specify a mask to hide the content of the packet header. • Select IPv6 to instruct the Switch to examine the IPv6 part of each packet header. 106