D-Link DGS-3324SR Product Manual - Page 77

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual Figure 6- 23. Instance ID Settings window- Add The user may configure the following parameters to create a MSTI in the Switch. Parameter Description MSTI ID Enter a number between 1 and 15 to set a new MSTI on the Switch. Type Create is selected to create a new MSTI. No other choices are available for this field when creating a new MSTI. VID List (1-4094) This field is used to specify the VID range from configured VLANs set on the Switch. Supported VIDs on the Switch range from ID number 1 to 4094. Click Apply to implement changes made. To configure the settings for the CIST, click on its hyperlinked MSTI ID number in the MST Configuration Identification window, which will reveal the following window to configure: Figure 6- 24. Instance ID Settings window - CIST modify The user may configure the following parameters to configure the CIST on the Switch. Parameter Description MSTI ID The MSTI ID of the CIST is 0 and cannot be altered. Type This field allows the user to choose a desired method for altering the MSTI settings. The user has 2 choices. • Add VID - Select this parameter to add VIDs to the MSTI ID, in conjunction with the VID List parameter. • Remove VID - Select this parameter to remove VIDs from the MSTI ID, in conjunction with the VID List parameter. VID List (1-4094) This field is used to specify the VID range from configured VLANs set on the Switch. Supported VIDs on the Switch range from ID number 1 to 4094. 62