D-Link DGS-3324SR Product Manual - Page 167

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual Static/Default Route Settings Entries into the Switch's forwarding table can be made using both MAC addresses and IP addresses. Static IP forwarding is accomplished by the entry of an IP address into the Switch's Static IP Routing Table. To view the following window, click Configuration > Layer 3 IP Networking > Static/Default Route Settings. Figure 6- 117. Static/Default Route Settings window This window shows the following values: Parameter Description IP Address The IP address of the Static/Default Route. Subnet Mask The corresponding Subnet Mask of the IP address entered into the table. Gateway The corresponding Gateway of the IP address entered into the table. Metric Represents the metric value of the IP interface entered into the table. This field may read a number between 1-65535 for an OSPF setting, and 1-16 for a RIP setting. Protocol Represents the protocol used for the Routing Table entry of the IP interface. This field may read OSPF, RIP, Static or Local. Backup State Represents the Backup state that this IP interface is configured for. This field may read Primary or Backup. Delete Click the to delete this entry from the Static/Default Route Settings table. To enter an IP Interface into the Switch's Static/Default Route Settings window, click the Add button, revealing the following window to configure. Figure 6- 118. Static/Default Route Settings - Add window 152