D-Link DGS-3324SR Product Manual - Page 195

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual To add an OSPF Area to the table, type a unique Area ID (see below) select the Type from the drop-down menu. For a Stub type, choose Enabled or Disabled from the Stub Import Summary LSA drop-down menu and determine the Stub Default Cost. Click the Add/Modify button to add the area ID set to the table. To remove an Area ID configuration set, simply click in the Delete column for the configuration. To change an existing set in the list, type the Area ID of the set to change, make the changes and click the Add/Modify button. The modified OSPF area ID will appear in the table. Figure 6- 142. OSPF Area Settings example window See the parameter descriptions below for information on the OSPF Area ID Settings. The Area ID settings are as follows: Parameter Description Area ID A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. Type This field can be toggled between Normal and Stub using the space bar. When it is toggled to Stub, additional fields appear − Stub Import Summary LSA, and the Stub Default Cost. Stub Import Summary LSA Displays whether or not the selected Area will allow Summary Link-State Advertisements (Summary LSAs) to be imported into the area from other areas. Stub Default Cost Displays the default cost for the route to the stub of between 0 and 65,535. The default is 1. 180