D-Link DGS-3324SR Product Manual - Page 258

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual SNMP Host Table Use the SNMP Host Table to set up SNMP trap recipients. Open the SNMP Manager folder and click on the SNMP Host Table link. This will open the SNMP Host Table page, as shown below. To delete an existing SNMP Host Table entry, click the corresponding under the Delete heading. To display the current settings for an existing SNMP Group Table entry, click the blue link for the entry under the Host IP Address heading. Figure 8- 10. SNMP Host Table To add a new entry to the Switch's SNMP Host Table, click the Add button in the upper left-hand corner of the page. This will open the SNMP Host Table Configuration page, as shown below. Figure 8- 11. SNMP Host Table Configuration window The following parameters can set: Parameter Description Host IP Address Type the IP address of the remote management station that will serve as the SNMP host for the Switch. SNMP Version V1 - To specify that SNMP version 1 will be used. V2 - To specify that SNMP version 2 will be used. V3-NoAuth-NoPriv - To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv security level. V3-Auth-NoPriv - To specify that the SNMP version 3 will be used, with an AuthNoPriv security level. V3-Auth-Priv - To specify that the SNMP version 3 will be used, with an Auth-Priv security level. Community String or Type in the community string or SNMP V3 user name as appropriate. SNMP V3 User Name To implement your new settings, click Apply. To return to the SNMP Host Table, click the Show All SNMP Host Table Entries link. 243