D-Link DGS-3324SR Product Manual - Page 221
PIM Interface Settings - Edit window, Join/Prune Interval
UPC - 790069262067
View all D-Link DGS-3324SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual Figure 6- 170. PIM Interface Settings - Edit window The following fields can be set: Parameter Description Interface Name This read-only field denotes the IP interface selected to be configured for PIM. IP Address This read-only field denotes the IP address of the IP interface selected to be configured for PIM. Designated Router This read-only field denotes the IP address of the Designated Router of the distribution tree to which this IP address belongs. Hello Interval This field will set the interval time between the sending of Hello Packets from this IP interface to neighboring routers one hop away. These Hello packets are used to discover other PIM enabled routers and state their priority as the Designated Router (DR) on the PIM enabled network. The user may state an interval time between 1 - 18724 seconds with a default interval time of 30 seconds. Join/Prune Interval This field will set the interval time between the sending of Join/Prune packets stating which multicast groups are to join the PIM enabled network and which are to be removed or "pruned" from that group. The user may state an interval time between 1 - 18724 seconds with a default interval time of 30 seconds. Mode Use the pull-down menu to select the type of PIM protocol to use, Sparse Mode (SM) or Dense Mode (DM). The default setting is DM. State Use the pull-down menu to enable or disable PIM for this IP interface. The default is Disabled. DR priority Enter the priority of this IP interface to become the Designated Router for the multiple access network. The user may enter a DR priority between 0 and 4,294,967,294 with a default setting of 1. Click Apply to implement changes made. 206