D-Link DGS-3324SR Product Manual - Page 225
PIM Register Checksum Settings
UPC - 790069262067
View all D-Link DGS-3324SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual Figure 6- 176. PIM Candidate RP Settings - Add window The following fields can be viewed or set: Parameter Description Group Address Enter the multicast group address for this CRP. This address must be a class D address. Group Mask Enter the mask for the multicast group address stated above. Interface Name Enter the name of the PIM-SM enabled interface the switch administrator wishes to become the CRP for this group. Click Apply to implement changes made. PIM Register Checksum Settings This window is used to set a first hop router to create checksums to be included with the data in Registered packets. To view this window, click Configuration > Layer 3 IP Networking > IP Multicast Routing Protocol > PIM Protocol > PIM Register Checksum Settings. Figure 6- 177. PIM Register Checksum Include Data RP List Settings window To configure the settings for this window, click the Add button, which will reveal the following window for the administrator to configure. Figure 6- 178. PIM Register Checksum Include Data RP List Settings - Add window The following fields can be set: Parameter Description RP Address Enter the IP address of the RP that will verify checksums included with Registered packets. Click Apply to set the RP as a checksum enabled router. 210