D-Link DGS-3324SR Product Manual - Page 239

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual Figure 7- 17. Enable Method List - Add window To define an Enable Login Method List, set the following parameters and click Apply: Parameter Description Method List Name Enter a method list name defined by the user of up to 15 characters. Method 1, 2, 3, 4 The user may add one, or a combination of up to four (4) of the following authentication methods to this method list: • local_enable - Adding this parameter will require the user to be authenticated using the local enable password database on the Switch. The local enable password must be set by the user in the next section entitled Local Enable Password. • none - Adding this parameter will require no authentication to access the Switch. • radius - Adding this parameter will require the user to be authenticated using the RADIUS protocol from a remote RADIUS server. • tacacs - Adding this parameter will require the user to be authenticated using the TACACS protocol from a remote TACACS server. • xtacacs - Adding this parameter will require the user to be authenticated using the XTACACS protocol from a remote XTACACS server. • tacacs+ - Adding this parameter will require the user to be authenticated using the TACACS protocol from a remote TACACS server. • server_group - Adding a previously configured server group will require the user to be authenticated using a user-defined server group previously configured on the Switch. 224