D-Link DGS-3324SR Product Manual - Page 171

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual Static ARP Table The Address Resolution Protocol (ARP) is a TCP/IP protocol that converts IP addresses into physical addresses. This table allows network managers to view, define, modify and delete ARP information for specific devices. Static entries can be defined in the ARP Table. When static entries are defined, a permanent entry is entered and is used to translate IP address to MAC addresses. To open the Static ARP Table open the Configuration folder, and then open the Layer 3 IP Networking folder and click on the Static ARP Settings link. Figure 6- 120. Static ARP Settings window To add a new entry, click the Add button, revealing the following screen to configure: Figure 6- 121. Static ARP Settings - Add window To modify a current entry, click the corresponding Modify button of the entry to be modified, revealing the following screen to configure: Figure 6- 122. Static ARP Settings - Edit window The following fields can be set or viewed: Parameter Description IP Address The IP address of the ARP entry. This field cannot be edited in the Static ARP Settings - Edit window. MAC Address The MAC address of the ARP entry. After entering the IP Address and MAC Address of the Static ARP entry, click Apply to implement the new entry. To completely clear the Static ARP Settings, click the Clear All button. 156