D-Link DGS-3324SR Product Manual - Page 65
Link Aggregation Group Configuration window - Modify, Master Port
UPC - 790069262067
View all D-Link DGS-3324SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual Figure 6- 11. Link Aggregation Group Configuration window - Modify The user-changeable parameters are as follows: Parameter Description Group ID Select an ID number for the group, between 1 and 32. Type This pull-down menu allows the selection of Static and LACP (Link Aggregation Control Protocol). LACP allows for the automatic detection of links in a Port Trunking Group. State Trunk groups can be toggled between Enabled and Disabled. This is used to turn a port trunking group on or off. This is useful for diagnostics, to quickly isolate a bandwidth intensive network device or to have an absolute backup aggregation group that is not under automatic control. Master Port Choose the Master Port for the trunk group using the pull-down menu. Unit Choose the unit of the switch in the stack to be configured. Member Ports Choose the members of a trunked group. 2 to 8 ports can be assigned to an individual group. Active Port Shows the port that is currently forwarding packets. Flooding Port A trunking group must designate one port to allow transmission of broadcasts and unknown unicasts. After setting the previous parameters, click Apply to allow implementation of changes made. Successfully created trunk groups will be show in the Current Link Aggregation Group Entries. 50