D-Link DGS-3324SR Product Manual - Page 301

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual If Adv. Router ID is selected, it is necessary to enter the IP address in the Advertisement Router ID field, and then click Find. If LSDB is selected, it is necessary to select the type of link state (RtrLink, NetLink, Summary, ASSummary and ASExtLink) in the LSDB Type field, and then click Find. The following fields are displayed in the OSPF LSDB Table: Parameter Description Area ID Allows the entry of an OSPF Area ID. This Area ID will then be used to search the table, and display an entry − if there is one. LSDB Type Displays which one of eight types of link advertisements by which the current link was discovered by the Switch: All, Router link (RTRLink), Network link (NETLink), Summary link (Summary), Autonomous System link (ASSummary), Autonomous System external link (ASExternal), MCGLink (Multicast Group), and NSSA (Not So Stubby Area) Adv. Router ID Displays the Advertising Router's ID. Link State ID This field identifies the portion of the Internet environment that is being described by the advertisement. The contents of this field depend on the advertisement's LS type. LS Type Link State ID 1 The originating router's Router ID. 2 The IP interface address of the network's Designated Router. 3 The destination network's IP address. 4 The Router ID of the described AS boundary router. Cost Displays the cost of the table entry. Sequence Displays a sequence number corresponding to number of times the current link has been advertised as changed. 286