D-Link DGS-3324SR Product Manual - Page 76

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual MST Configuration Table The following screens in the MST Configuration Table window allow the user to configure a MSTI instance on the Switch. These settings will uniquely identify a multiple spanning tree instance set on the Switch. The Switch initially possesses one CIST or Common Internal Spanning Tree of which the user may modify the parameters for but cannot change the MSTI ID for, and cannot be deleted. To view the MST Configuration Identification window, click Configuration > Spanning Tree > MST Configuration Identification: Figure 6- 22. MST Configuration Identification window The window above contains the following information: Parameter Description Configuration Name A previously configured name set on the Switch to uniquely identify the MSTI (Multiple Spanning Tree Instance). If a configuration name is not set, this field will show the MAC address to the device running MSTP. Revision Level This value, along with the Configuration Name will identify the MSTP region configured on the Switch. MSTI ID This field shows the MSTI IDs currently set on the Switch. This field will always have the CIST MSTI, which may be configured but not deleted. Clicking the hyperlinked name will open a new window for configuring parameters associated with that particular MSTI. VID List This field displays the VLAN IDs associated with the specific MSTI. To delete a previously set MSTI Instance ID, click the corresponding under the Delete heading in the MST Configuration Identification window. Clicking the Add button will reveal the following window to configure: 61