D-Link DGS-3324SR Product Manual - Page 141

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual Figure 6- 84. CPU Access Rule Table (IP) To create a new rule set for an access profile click the Add button. A new window is displayed. To remove a previously created rule, click the corresponding button. The following window is used for the IP Rule configuration. Figure 6- 85. CPU Access Rule Configuration (IP) Configure the following Access Rule Configuration settings for IP: Parameter Description Profile ID This is the identifier number for this profile set. Mode Select Permit to specify that the packets that match the access profile are forwarded by the Switch, according to any additional rule added (see below). Select Deny to specify that packets that match the access profile are not forwarded by the Switch and will be filtered. Access ID Type in a unique identifier number for this access. This value can be set from 1 - 5. Type Selected profile based on Ethernet (MAC Address), IP address, Packet Content or IPv6. • Ethernet instructs the Switch to examine the layer 2 part of each packet header. • IP instructs the Switch to examine the IP address in each frame's header. • Packet Content Mask instructs the Switch to examine the packet header. • IPv6 instructs the Switch to examine the IPv6 part of each packet header. VLAN Name Allows the entry of a name for a previously configured VLAN. 126