D-Link DGS-3324SR Product Manual - Page 240

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual Configure Local Enable Password This window will configure the locally enabled password for the Enable Admin command. When a user chooses the "local_enable" method to promote user level privileges to administrator privileges, he or she will be prompted to enter the password configured here that is locally set on the Switch. To view the following window, click Security Management > Access Authentication Control > Configure Local Enable Password: Figure 7- 18. Configure Local Enable Password window To set the Local Enable Password, set the following parameters and click Apply. Parameter Description Old Local Enable Password If a password was previously configured for this entry, enter it here in order to change it to a new password New Local Enable Password Enter the new password on the Switch used to authenticate users attempting to access Administrator Level privileges on the Switch. The user may set a password of up to 15 characters. Confirm Local Enable Confirm the new password entered above. Entering a different password here from Password the one set in the New Local Enabled field will result in a fail message. Click Apply to implement changes made. 225