D-Link DGS-3324SR Product Manual - Page 136
src port mask, protocol id, Click, to set this entry in the Switch's memory.
UPC - 790069262067
View all D-Link DGS-3324SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual value, or specify Code to further specify that the access profile will apply an ICMP code value. Select IGMP to instruct the Switch to examine the Internet Group Management Protocol (IGMP) field in each frame's header. • Select Type to further specify that the access profile will apply an IGMP type value Select TCP to use the TCP port number contained in an incoming packet as the forwarding criterion. Selecting TCP requires specification of a source port mask and/or a destination port mask. The user may also identify which flag bits to filter. Flag bits are parts of a packet that determine what to do with the packet. The user may filter packets by filtering certain flag bits within the packets, by checking the boxes corresponding to the flag bits of the TCP field. The user may choose between urg (urgent), ack (acknowledgement), psh (push), rst (reset), syn (synchronize), fin (finish). • src port mask - Specify a TCP port mask for the source port in hex form (hex 0x0-0xffff), to filter. • dest port mask - Specify a TCP port mask for the destination port in hex form (hex 0x0-0xffff) to filter. Select UDP to use the UDP port number contained in an incoming packet as the forwarding criterion. Selecting UDP requires that specification of a source port mask and/or a destination port mask. • src port mask - Specify a TCP port mask for the source port in hex form (hex 0x0-0xffff). • dest port mask - Specify a TCP port mask for the destination port in hex form (hex 0x0-0xffff). protocol id - Enter a value defining the protocol ID in the packet header to mask. Specify the protocol ID mask in hex form (hex 0x0-0xffffffff). Click Apply to set this entry in the Switch's memory. 121