Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen
Dell Force10 MXL Blade Manual
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell Force10 MXL Blade manual content summary:
- Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 1
Dell Force10 FTOS Command Line Reference Guide for the MXL 10/40GbE Switch IO Module Publication Date: March 2013 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 2
loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Information in this publication is subject to change without notice. © 2012 Dell Force10. All rights reserved. Reproduction of these materials in any manner - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 3
1 About this Guide 9 Objectives 9 Audience 9 Conventions 9 Information Symbols 10 Related Documents 10 2 CLI Basics 11 Accessing the Command Line 11 Multiple Configuration Users 12 Navigating the Command Line Interface 12 Obtaining Help 13 Using the Keyword no 15 Filtering show Commands - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 4
.dell.com | support.dell DCB Command 153 PFC Commands 153 ETS Commands 154 DCBX Commands 154 10 Dynamic Host Configuration Protocol (DHCP 187 Overview 187 Commands to Configure the System to be a DHCP Server 187 Commands to Configure the System to be a DHCP Client 194 Other Commands supported - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 5
12 GARP VLAN Registration (GVRP 217 Commands 217 Important Points to Remember 218 13 Internet Group Management Protocol (IGMP 227 IGMP Snooping Commands 227 Important Points to Remember for IGMP Snooping 227 Important Points to Remember for IGMP Querier 228 14 Interfaces 235 Overview 235 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 6
www.dell.com | support.dell.com 21 Open Shortest Path First (OSPFv2 385 Overview 385 OSPFv2 VLAN Spanning Tree Plus (PVST 449 Overview 449 Commands 449 25 Quality of Service (QoS 461 Overview 461 Global Configuration Commands 461 Per-Port QoS Commands 462 Policy-Based QoS Commands 467 26 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 7
TACACS+ Commands 552 SSH Server and SCP Commands 555 Secure DHCP Commands 566 30 sFlow 571 Overview 571 Important Points to Remember 571 Commands 572 31 Simple Network Management Protocol ( - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 8
www.dell.com | support.dell.com 39 Debugging and Diagnostics 675 Offline Diagnostic Commands 675 Important Points to Remember 675 Buffer Tuning Commands 677 Hardware Commands 682 40 Internet Control - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 9
protocols and features found in FTOS and on the Dell Force10 systems supported by FTOS. This chapter includes: • Objectives • Audience • Conventions • Information Symbols • Related Documents Objectives This document is intended as a reference guide for the FTOS CLI commands, with detailed syntax - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 10
www.dell.com | support.dell.com x | y Keywords and parameters separated by bar require you to choose one following documents: • FTOS Configuration Guide • Installation and maintenance guides for the MXL 10/40GbE Switch system • Release Notes for the MXL 10/40GbE Switch system and FTOS version 8.3. - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 11
Dell Force10 operating software (FTOS) commands are in a text-based interface that allows you to use launch commands, change the command modes, and configure a serial console port or a Telnet session. When you Telnet into the switch, you are prompted to enter a login name and password. Figure 2-1 is - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 12
www.dell.com | support.dell.com Multiple Configuration Users When a user enters CONFIGURATION mode and another user(s) is already in that configuration mode, FTOS generates an alert warning message similar to Figure 2-2: Figure 2-2. Configuration Mode User Alert FTOS#conf % Warning: The following - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 13
Table 2-1. Command Prompt and Corresponding Command Mode Prompt FTOS(conf-ext-nacl)# FTOS(conf-std-nacl)# FTOS(conf-line-console)# FTOS(conf-line-vty)# FTOS(conf-ext-macl)# FTOS(conf-std-macl)# FTOS(conf-mon-sess)# FTOS(conf-stp)# FTOS(conf-mstp)# FTOS(conf-pvst)# FTOS(conf-rstp)# FTOS(conf-gvrp)# - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 14
www.dell.com | support.dell.com Figure 2-3 shows the results of entering ip ? at the prompt. Figure -msdp multicast-routing name-server pim prefix-list radius route scp source-route ssh tacacs telnet tftp Named access-list Control plane configuration DHCP configuration commands Domain name to - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 15
key Recalls commands, beginning with the last command Deletes the line. Deletes the previous word. Deletes the line. Comes back to EXEC mode from any CONFIGURATION mode Moves the cursor back one word. Moves the cursor forward one word. Deletes all characters from the cursor to the end of the word - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 16
www.dell.com | support.dell.com • no-more - do not paginate the display output • save - copy When you initially log in to the switch, by default you are logged into EXEC mode. This mode allows you to view settings and to enter EXEC Privilege mode to configure the device. While you are in EXEC - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 17
. In addition, you can access CONFIGURATION mode to configure interfaces, routes, and protocols on the switch. While you are logged in to EXEC the interface command. INTERFACE Mode Use INTERFACE mode to configure interfaces or IP services on those interfaces. An interface can be physical (for - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 18
.dell.com | support.dell.com LINE Mode Use LINE mode to configure console or virtual terminal parameters. To enter LINE mode: 1. Verify that you are logged in to CONFIGURATION mode. 2. Enter the line command. You must include the keywords console or vty and their line number available on the switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 19
(STP), as described in Spanning Tree Protocol (STP). To enter STP mode: 1. Verify that you are logged into CONFIGURATION mode. 2. Enter the protocol spanning-tree 0 command. You can return to CONFIGURATION mode by using the exit command. Per-VLAN SPANNING TREE Plus Mode Use PVST+ mode to enable and - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 20
.dell.com | support.dell.com MULTIPLE SPANNING TREE Mode Use MULTIPLE SPANNING TREE mode to enable and configure the multiple spanning tree protocol (MSTP), as described in Multiple Spanning Tree Protocol (MSTP). To enter MULTIPLE SPANNING TREE mode: 1. Verify that you are logged into CONFIGURATION - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 21
3 File Management Overview This chapter contains commands needed to manage the configuration files and includes other file management commands found in the Dell Force10 operating software (FTOS). Basic File Management Commands The commands included in this chapter are: • cd • copy • copy running- - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 22
www.dell.com | support.dell.com cd configuration, enter the keyword startup-config. • To copy a file on the external FLASH, enter usbflash:// followed by the filename. Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage FTOS supports - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 23
config {duplicate} Command Modes EXEC Privilege Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module This command is useful for quickly making a changed configuration on one chassis available on external flash in order to move it to another chassis. File - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 24
www.dell.com | support.dell.com delete Delete a file from the flash. Once deleted, files directory name: Command Modes EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 3-3. dir for the Internal Flash Command Example FTOS#dir Directory - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 25
logging coredump stack-unit all Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The Kernel core dump can . Related Commands logging coredump server Designates a sever to upload kernel core-dumps. File Management | 25 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 26
MXL 10/40GbE Switch IO Module Because flash space may be limited, using this command ensures your entire crash kernel files are uploaded successfully and completely. Only a single coredump server can be configured. Configuration of a new coredump server over-writes any previously configured server - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 27
History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show boot system Displays information about boot images currently configured on the system. Syntax show boot 3 is not present. Stack-unit 4 is not present. Stack-unit 5 DOWNLOAD BOOT 9-1-0-675 9-1-0-684 File Management | 27 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 28
dell.com | support.dell MXL 10/40GbE Switch IO Module Example Figure 3-6. show file Command Example (Partial) FTOS#show file flash://startup-config ! Version E8-3-16-29 ! Last configuration change at Thu Apr 26 19:19:02 2012 by default ! Startup-config last updated unit 5 ! service timestamps log - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 29
• For a file on the internal Flash, enter flash:// followed by the filename. • For a file on an FTP server, enter ftp://user:password@hostip/filepath • For a file on a TFTP server, enter tftp://hostip/filepath • For a file on the external Flash, enter usbflash:// followed by the filename. Defaults - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 30
www.dell.com | support.dell.com Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Note: A filepath that contains a dot (.) is not supported. Example Figure 3-8. show os-version Command Example FTOS#show os-version RELEASE IMAGE INFORMATION : - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 31
• management-route for the current Management port forwarding configuration • mroute for the current Mroutes configuration • ntp for the current NTP configuration • ospf for the current OSPF configuration • pim for the current PIM configuration • policy-map-input for the current input policy - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 32
8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 3-9. show running-config Command Example (Partial) FTOS#show running-config Current Configuration ... ! Version E8-3-16-29 ! Last configuration change at Thu Apr 26 19:19:21 2012 by admin ! Startup-config last updated at Thu Apr - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 33
configuration. show version Display the current FTOS version information on the system. Syntax show version Command Modes EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 3-12. show version Command Example FTOS#show version Dell Force10 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 34
dell.com | support.dell.com Table 3-2. show version Command Fields Lines beginning with Dell Force10 Application... Copyright (c)... Build Time... Build Path... Dell Force10 keyword to upgrade from the current image in the MXL 10/40GbE Switch. After entering this keyword you can either follow it - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 35
Defaults Command Modes Command History Usage Information Example none EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module You must reload FTOS after executing this command. Figure 3-13. upgrade boot Command Example FTOS#upgrade boot ? all bootflash-image bootselector- - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 36
www.dell.com | support.dell.com Usage You must reload FTOS after executing this command. Use the command upgrade system stack-unit to Information copy FTOS from the management unit - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 37
for the MXL 10/40GbE Switch IO Module. Commands This chapter includes the following commands: asf-mode banner exec banner login banner motd clear alarms clear command history clear line configure debug cpu-traffic-stats debug ftpserver disable do enable enable optic-info-update interval end - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 38
www.dell.com | support.dell.com asf-mode Enable alternate store and forward (ASF) - 15 Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information You must save the configuration and reload the system - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 39
session is terminated for user on line console This is the banner Dell Force10 con0 now available Press RETURN to get started. This is the configured and the CR is required when creating a banner. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 40
www.dell.com | support.dell.com Example is terminated for user on line console This is the banner Dell Force10 con0 now available Press RETURN to get started. 13d21h10m: is configured. CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 41
Clear the command history log. Syntax clear command history Command Modes EXEC Privilege Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show command-history Displays a buffered log of all commands entered by all users along with a time stamp. clear - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 42
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 4-3. configure Command Example FTOS#configure FTOS(conf)# debug cpu- command displays traffic statistics. Dell Force10 recommends disabling debugging (no debug cpu-traffic-stats) after troubleshooting is complete. Related Commands - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 43
FTP server. Syntax debug ftpserver Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO CONFIGURATION INTERFACE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The following commands are not supported - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 44
www.dell.com | support.dell.com Example Figure 4-4. do Command Example FTOS(conf-if-te-5/0)#do clear 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information Users entering EXEC Privilege mode or any other configured privilege level can access configuration commands. To protect - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 45
updates command. Usage The default interval for the polling is 300 seconds (5 minutes). Use this command to enable the polling Information and to configure lines (if configured, the banner appears). Command Modes LINE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 46
10/40GbE Switch IO Module To remove the time interval, use the exec-timeout 0 0 command. Example Figure 4-5. FTOS time-out display FTOS con0 is now available Press RETURN to get started. FTOS> exit Return to the lower command mode. Syntax exit Command Modes • EXEC Privilege • CONFIGURATION - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 47
Disabled. Command Modes CONFIGURATION Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 4-6. Logging on to an FTP Server Example morpheus% ftp 10.31.1.111 Connected to 10.31.1.111. 220 Dell Force10 (1.0) FTP server ready Name (10.31.1.111:dch): dch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 48
dell.com | support.dell.com Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information After you enable FTP server functions with the ftp-server enable command, Dell Force10 CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 49
a string up to 40 characters as the password. Defaults Not configured. Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The password is listed in the configuration file; you can view the password using the show running - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 50
www.dell.com | support.dell.com Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands copy Copies files from and to the switch. ip ftp username Assign a user name for outgoing FTP connection requests. Syntax Parameters ip - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 51
on the system that is closest to the Telnet address is used in the outgoing packets. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands telnet Telnets to another device. ip tftp source-interface Assign an interface's IP - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 52
. The system supports 10 Telnet sessions. (OPTIONAL) Enter a number from 1 to 9 as the last virtual terminal line to configure. You can configure multiple lines at one time. Defaults Not configured Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 53
channel followed by a number: Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot enter the keyword vlan followed by a number from 1 to 4094. Enter the type of service required. Range: 0-255 Default: 0 Enter Y or N for the don't fragment bit - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 54
by a number from 1 to 4094. Defaults See parameters above. Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information When you enter the ping command without specifying an IP address (Extended Ping), you are prompted for - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 55
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Messages can contain an unlimited number of lines; however, each line is limited to 255 characters. To move to the next line, use the . To send the message use CTR-Z, to abort a message use CTR-C. service timestamps Add time stamps to - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 56
www.dell.com | support.dell.com Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage If you do not specify parameters and enter service timestamps, it appears as service timestamps Information debug uptime in - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 57
all of the commands that may be preceded by the keyword no, which is the keyword used to remove a command from the running-configuration. Defaults None Command Mode EXEC EXEC Privilege Command History H Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Control and Monitoring | 57 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 58
www.dell.com | support.dell.com Usage Reload the system to reset the command-tree counters. Information Example Figure 4-10. show command-tree Command Example 128> tengigabitethernet SLOT/PORT vlan conflict A.B.C.D server statistics snooping binding command usage:1 option usage: 0 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 59
a list of all enabled debugging processes. Syntax show debugging Command Mode EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 4-12. show debugging Command Example FTOS#show debug Generic IP: (Access List: test) IP packet debugging is - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 60
www.dell.com | support.dell.com Parameters all stack-unit unit-id thermal sensor Enter the . Command Modes EXEC EXEC Privilege Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 4-13 shows the output of the show environment fan command as - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 61
10/40GbE Switch IO Module Command Example FTOS#show inventory System Type System Mode Software Version : MXL-10/40GbE : 1.0 : NAVASOTA-DEV-9-1-0-917 Unit Type Serial Number Part Number Revision * 1 MXL-10/40GbE TW282921F00048 0NVH81 2.0 * - Management Unit Software Protocol Configured - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 62
www.dell.com | support.dell.com Related Commands show interfaces show interfaces transceiver Display member. Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The output for the show memory command displays the memory usage - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 63
memory to display memory statistics. See Example 4. Command Modes EXEC EXEC Privilege Command History Example 1 Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 4-19. show processes cpu summary Command Example FTOS#show processes cpu summary CPU utilization 5Sec 1Min 5Min - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 64
www.dell.com | support.dell.com Example 3 Figure 4-21. show processes cpu stack-unit Command Example FTOS 00% 0.00% 0.00% 0 GC 0x7811e000 0 0 0 0.00% 0.00% 0.00% 0 bshell_reaper_threa 0x78365000 10 1 10000 0.00% 0.00% 0.00% 0 tSysLog 0x78367000 1106980 110698 10000 0.00% 0.00% 0.00% - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 65
Example 4 Figure 4-22. show processes memory Command Example FTOS#show processes memory Memory Statistics Of Stack Unit 0 (bytes) Total: 2147483648, MaxUsed: 378417152, CurrentUsed: 378417152, CurrentFree: 1769066496 TaskName TotalAllocated TotalFreed MaxHeld CurrentHolding - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 66
dell.com | support.dell History Example 1 Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 4-24. show processes ipc Sent/Msg Sent/ #msg Ackd/Ack Rcvd Description Source Service Identifier Destination Service Identifier Current number of messages enqueued Highest number of packets - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 67
of memory availability and usage on all stack members. Command Modes EXEC EXEC Privilege Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The output for the show process memory command displays the memory usage statistics running on CP part (sysd) of - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 68
www.dell.com | support.dell.com Example The output of show memory and this command will differ based on which FTOS processes are counted. • In the show memory display output, - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 69
the keyword trace-flags to display IFM information for internal trace flags. Defaults None Command Mode EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Control and Monitoring | 69 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 70
www.dell.com | support.dell.com Example Figure 4-27. show software ifm clients summary 0 to 5. Command Modes EXEC EXEC Privilege Command History Usage Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 4-28 shows the output from the show system brief command. Figure 4-29 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 71
: 2147483648 bytes Temperature : 44C Voltage : ok Switch Power : GOOD Product Name : Force10 MXL 10/40GbE Mfg By : DELL Mfg Date : 2012-01-05 Serial Number : DELL123456 Part Number : 0NVH81X01 Piece Part ID : N/A PPID Revision : N/A Service Tag : N/A Expr Svc Code : N/A PSOC FW - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 72
stack member. Configures the ability of the switch to become the management unit of a stack. show tech-support Display a collection of data from other show commands, necessary for Dell Force10 technical support to perform troubleshooting on MXL switches. Syntax show tech-support [stack-unit - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 73
(flash://filename (max 20 chars) ) FTOS#show tech-support stack-unit 1 | save flash://LauraSave Start saving show command report ....... FTOS# FTOS#dir Directory of flash: Directory of flash: 1 drwx 2 drwx 3 drwx 4 drwx 5 d--6 -rwx 7 -rwx 8 -rwx 9 -rwx 10 drwx 11 -rwx 4096 2048 4096 4096 4096 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 74
dell.com | support.dell.com Figure 4-31. show tech-support Command Example (Partial) FTOS#show tech-support timestamp 0 info reply, 0 time exceeded, 0 parameter problem UDP statistics: Rcvd: 396516 total, 0 checksum errors, Rcvd: 43988 requests, 24518 replies, 10 wrong interface Sent: 42 requests, - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 75
switch status. Displays system component status. Displays memory usage based on the running processes. telnet Connect through Telnet to a server. The Telnet client and server in FTOS supports a number: Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 76
www.dell.com | support.dell.com Defaults Not configured. Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Telnet to link-local addresses is not supported. Information terminal length Configure the number of lines displayed - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 77
, refer to the XML chapter in the FTOS Configuration Guide. traceroute View the packet path to a specific Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module When you enter the server (10.11.0.1) [OK] Type Ctrl-C to abort. Tracing the route to www.force10networks.com (10 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 78
www.dell.com | support.dell.com undebug all Disable all debug operations on the system. Syntax undebug all Defaults none Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module virtual-ip Syntax Configure a virtual IP address for the active - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 79
Command Modes EXEC Privilege Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The write memory command saves the running-configuration to the file labeled startup-configuration. When using a LOCAL CONFIG FILE other than the startup-config not named " - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 80
80 | Control and Monitoring www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 81
5 u-Boot Overview All commands in this chapter are in u-Boot mode. These commands are supported on the Dell Force10 MXL 10/40GbE Switch Module platform only. To access this mode, hit any key when the following line appears on the console during a system boot: Hit any key to - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 82
.dell.com | support.dell.com Note: You cannot use the Tab key to complete commands in this mode. boot change Change the operating system boot parameters. Syntax boot change [primary | secondary | default] Command Modes uBoot Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 83
boot configuration failure. Syntax boot write net config retries Command Modes uBoot Command History Example Version 8.3.16.1 u Introduced on MXL 10/40GbE Switch IO Module Figure 5-2. boot write net config retries Command Example BOOT_USER # boot write net config retries 2 Updated - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 84
www.dell.com | support.dell.com help Display help menu. Syntax help Command Modes uBoot Command History Version 8.3.16.1 u Introduced on MXL 10/40GbE Switch IO Module Example Figure 5-3. help Command Example BOOT_USER # help ***** Dell Force10 Boot Interface Help Information ***** Current - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 85
-gateway Clear the default gateway IP address. Syntax no default-gateway Command Modes uBoot Command History Version 8.3.16.1 u Introduced on MXL 10/40GbE Switch IO Module no interface management ethernet ip address Clear the management port IP address and mask. Syntax no interface management - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 86
www.dell.com | support.dell.com show boot blc Show the boot loop counter value. Syntax show boot blc Command Modes uBoot Command History Version 8.3.16.1 u Introduced on MXL 10/40GbE Switch IO Module Example Figure 5-4. show boot blc Command Example BOOT_USER # show boot blc ? Total 1 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 87
Command History Version 8.3.16.1 u Introduced on MXL 10/40GbE Switch IO Module Example Figure 5-6. show bootflash Command Example BOOT_USER # show bootflash GENERAL BOOTFLASH INFO Bootflash Partition A: Dell Force10 Networks System Boot Official IOM_LP_IMG_BOOT_LOADER, BSP Release 4.0.1.0bt1 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 88
dell.com | support.dell.com Example Figure 5-7. show bootvar Command Example BOOT_USER # show bootvar PRIMARY OPERATING SYSTEM BOOT PARAMETERS: boot device : tftp file name : premnath Management Etherenet IP address : 10.16.130.134/16 Server IP address : 10 on MXL 10/40GbE Switch IO - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 89
uBoot Command History Version 8.3.16.1 u Introduced on MXL 10/40GbE Switch IO Module Example Figure 5-10. show interface management port config Command Example BOOT_USER # show interface management port config Management ethernet Port Configuration: no Auto Negotiate Management ethernet Port - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 90
www.dell.com | support.dell.com Example Figure 5-11. help Command Example BOOT_USER # help ***** Dell Force10 Boot Interface Help Information ***** Current access level: USER LEVEL Use "syntax help" for more information on syntax. Available command list (22 commands total): boot change [ - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 91
Access Control Lists (ACL) Overview The Dell Force10 operating software (FTOS) supports the following types of access control lists specific options. Some commands may use similar names, but require different options to support the different ACL types (for example, deny). • description • remark • - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 92
-MAC ACCESS LIST-EXTENDED Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The remark command is available in each ACL mode. You can configure up to 4294967290 remarks in a given ACL. The following example shows the use of the remark command - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 93
to identify the access list type to resequence. Enter the name of a configured IP access list. Enter the starting sequence number to resequence. Range: 0 Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module When all sequence numbers have been exhausted, - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 94
Syntax show config Command Modes CONFIGURATION-IP ACCESS-LIST-STANDARD CONFIGURATION-IP ACCESS-LIST-EXTENDED CONFIGURATION-MAC ACCESS LIST-STANDARD CONFIGURATION-MAC ACCESS LIST-EXTENDED Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 6-2. show config - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 95
-group [access-list-name] Parameters access-list-name (OPTIONAL) Enter the name of a configured access-list, up to 140 characters. Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip access-group Assign an IP access list (IP ACL) to an - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 96
dell.com | support.dell MXL 10/40GbE Switch IO Module Usage Information You can assign one ACL (standard or extended ACL) to an interface. Note: This command is not supported on the MXL Switch -name interface interface in Enter the name of a configured MAC ACL, up to 140 characters. Enter the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 97
EXEC EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 6-3. show ip accounting access-lists name of the IP ACL. Displays the filter. If the keywords count or byte were configured in the filter, the number of packets or bytes processed by the filter is displayed - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 98
www.dell.com | support.dell.com Standard IP ACL Commands When an ACL is created without any rule and then applied to an interface, ACL behavior reflects an implicit permit. The MXL 10/40GbE Switch IO Module platform supports both ingress and egress IP ACLs. The commands needed to configure a - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 99
Introduced on MXL 10/40GbE Switch IO Module Usage The order option is relevant in the context of the Policy QoS feature only. For more information, refer Information to the Quality of Service (QoS) chapter of the FTOS Configuration Guide. In the MXL Switch, you can configure either count (packets - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 100
www.dell.com | support.dell.com • MXL 10/40GbE Switch IO Module Usage The order option is relevant in the context of the Policy QoS feature only. For more information, refer Information to the Quality of Service (QoS) chapter of the FTOS Configuration Guide. In the MXL Switch, you can configure - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 101
keyword fragments to use ACLs to control packet fragments. Defaults Not configured Command Modes CONFIGURATION-IP ACCESS-LIST-STANDARD Command History Usage Information Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The order option is relevant in the context of - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 102
an interface, ACL behavior reflects an implicit permit. The following commands configure extended IP ACLs, which in addition to the IP address also examine the packet's protocol type. The MXL 10/40GbE Switch IO Module platform supports both ingress and egress IP ACLs. • deny • deny icmp • deny tcp - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 103
8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The order option is relevant in the context of the Policy QoS feature only. For more information, refer to the Quality of Service (QoS) chapter of the FTOS Configuration Guide. In the MXL Switch, you can configure either count (packets) or - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 104
dell.com | support.dell MXL 10/40GbE Switch IO Module The order option is relevant in the context of the Policy QoS feature only. For more information, refer to the Quality of Service (QoS) chapter of the FTOS Configuration Guide Echo Echo reply Parameter problem Host isolated Host unreachable - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 105
option option-missing packet-too-big parameter-problem port-unreachable precedence-unreachable protocol-unreachable reassembly- Timestamp replies Timestamp requests Traceroute TTL exceeded All unreachables deny tcp Configure a filter that drops TCP packets meeting the filter criteria. Syntax - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 106
www.dell.com | support.dell.com Parameters source mask any host ip-address dscp ACLs to control packet fragments. Defaults Not configured. Command Modes Command History CONFIGURATION-IP ACCESS-LIST-EXTENDED Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 106 | Access Control Lists - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 107
is relevant in the context of the Policy QoS feature only. For more information, refer Information to the Quality of Service (QoS) chapter of the FTOS Configuration Guide. In the MXL Switch, you can configure either count (packets) or count (bytes). However, for an ACL with multiple rules, you can - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 108
www.dell.com | support.dell.com any host ip-address MXL 10/40GbE Switch IO Module The order option is relevant in the context of the Policy QoS feature only. For more information, refer to the Quality of Service (QoS) chapter of the FTOS Configuration Guide. In the MXL Switch, you can configure - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 109
an implicit deny any; that is, if no match occurs, the packet is dropped. Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The number of entries allowed per ACL is hardware-dependent. For detailed specification on entries - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 110
www.dell.com | support.dell.com permit Configure a MXL 10/40GbE Switch IO Module The order option is relevant in the context of the Policy QoS feature only. For more information, refer to the Quality of Service (QoS) chapter of the FTOS Configuration Guide. In the MXL Switch, you can configure - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 111
a permit filter for UDP packets. permit icmp Configure a filter to allow all or specific ICMP MXL 10/40GbE Switch IO Module The order option is relevant in the context of the Policy QoS feature only. For more information, refer to the Quality of Service chapter of the FTOS Configuration Guide - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 112
www.dell.com | support.dell.com permit tcp Configure a filter to pass TCP packets meeting the filter criteria. Syntax permit tcp {source mask | any | host ip-address} [bit] [operator port [port]] {destination mask | any | - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 113
-LIST-EXTENDED Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The order option is relevant in the context of the Policy QoS feature only. For more information, refer to the Quality of Service chapter of the FTOS Configuration Guide. The MXL 10/40GbE System IO Module cannot count both - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 114
www.dell.com | support.dell.com permit udp Configure a filter to pass UDP packets meeting the filter MXL 10/40GbE Switch IO Module The order option is relevant in the context of the Policy QoS feature only. For more information, refer to the Quality of Service chapter of the FTOS Configuration Guide - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 115
In the MXL Switch, you can configure either count (packets) or count (bytes). However, for an ACL with multiple rules, you can configure some ACLs lt, range) may require more than one entry. The range of ports is configured in the CAM based on bit mask boundaries; the space required depends on - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 116
have the lowest order by default (255). Enter the keyword fragments to use ACLs to control packet fragments. Defaults Not configured Command Modes CONFIGURATION-IP ACCESS-LIST-EXTENDED Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 116 | Access Control Lists (ACL) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 117
(Standard and Extended) and do not have mode-specific options. The MXL 10/40GbE Switch IO Module platform supports both ingress and egress MAC ACLs. The following commands allow you to clear, display and assign MAC ACL configurations. • clear counters mac access-group • mac access-group • show mac - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 118
the ACL to filter incoming traffic. Enter the keyword out to configure the ACL to filter outgoing traffic. Defaults none Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage You can assign one ACL (standard or extended) to an interface - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 119
-list-name interface interface in | out Enter the name of a configured MAC ACL, up to 140 characters. Enter the keyword interface followed EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 6-6. show mac accounting access-list Command - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 120
www.dell.com | support.dell.com Standard MAC ACL Commands When an access-list is created without any rule and then applied to an interface, ACL behavior reflects implicit permit. The MXL 10/40GbE Switch IO Module platform supports both ingress and egress MAC ACLs. The following commands configure - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 121
name of the standard MAC access list (140 character maximum). Defaults Not configured Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module FTOS supports one ingress and one egress MAC ACL per interface. The number of entries - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 122
-MAC ACCESS LIST-STANDARD Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module deny Configures a MAC ACL filter to drop packets. seq Configures a MAC ACL filter with a specified sequence number. seq Assign a sequence number to a deny or permit - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 123
without any rule and then applied to an interface, ACL behavior reflects implicit permit. The MXL 10/40GbE Switch IO Module platform supports ingress and egress MAC ACLs. The following commands configure Extended MAC ACLs. • deny • mac access-list extended • permit • seq Note: See also Commands - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 124
www.dell.com | support.dell.com ethertype operator count byte (OPTIONAL) To filter based on protocol up to 140 characters. Defaults No default configuration Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The number of entries - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 125
5 IPv4 FTOS(conf-ext-macl)#seq 10 permit any any ev2 eq 800 count bytes Configures a standard MAC access list. Displays MAC access list configurations and counters (if configured). permit Configure the MAC address must be matched. The MAC ACL supports an inverse mask, therefore, a mask of ff - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 126
www.dell.com | support.dell.com ethertype operator count byte (OPTIONAL) To filter based on protocol Defaults Not configured. Command Modes CONFIGURATION-MAC ACCESS LIST-EXTENDED Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module deny Configures a - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 127
-MAC ACCESS LIST-STANDARD Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module deny permit Configures a filter to drop traffic. Configures a filter to forward traffic. IP Prefix List Commands When an access-list is created without any rule and - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 128
www.dell.com | support.dell.com Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Default Clears "hit" counters for all prefix lists unless a prefix list is specified. Related Commands ip prefix-list Configures a prefix list. deny Configure a filter to drop - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 129
16.1 Introduced on MXL 10/40GbE Switch IO Module Sequence numbers for this filter are automatically assigned starting at sequence number 5. If you do not use the options ge or le, only packets with an exact match to the prefix are filtered. Related Commands deny seq Configures a filter to drop - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 130
www.dell.com | support.dell.com ge min-prefix-length le max-prefix-length bitmask a bit mask number in dotted decimal format. Defaults Not configured. Command Modes PREFIX-LIST Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage If you do not use the options ge - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 131
the name of the prefix list, up to 140 characters long. Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 6-11. show ip prefix-list summary Command Example FTOS#show ip prefix summary Prefix-list with the last deletion - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 132
the route map sequence number. Range: 1 - 65535 Default: no sequence number Defaults Not Configured Command Modes ROUTE-MAP Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The continue feature allows movement from one route-map entry to a specific - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 133
overrides the previous set of actions with the same set command. • If you configure the set community additive and set as-path prepend options, the communities and AS Commands Version 8.3.16.1 route-map Introduced on MXL 10/40GbE Switch IO Module Enables a route map. Access Control Lists (ACL) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 134
www.dell.com | support.dell.com match interface Configure a filter to match routes whose next hop is on the the slot/port information. Defaults Not configured Command Modes ROUTE-MAP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands match ip address - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 135
140 characters. Enter the keywords prefix-list followed by the name of configured prefix list. Defaults Not configured. Command Modes ROUTE-MAP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands match interface match ip address match ip route-source - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 136
www.dell.com | support.dell.com Related Commands match interface match ip address match : zero (0) to 4294967295. Defaults Not configured. Command Modes ROUTE-MAP Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module match interface match ip address - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 137
tag-value Enter a value as the tag on which to match. Range: zero (0) to 4294967295. Defaults Not configured Command Modes ROUTE-MAP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands match interface match ip address match ip next-hop match ip route - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 138
www.dell.com | support.dell.com deny sequence-number (OPTIONAL) Enter the keyword deny to map, the permit action is the default. Command Modes CONFIGURATION Command History Example Version 8.3.16.1 \ Introduced on MXL 10/40GbE Switch IO Module Figure 6-12. route-map Command Example FTOS(conf - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 139
redistributed routes. Enter a number as the new metric value. Range: zero (0) to 4294967295 Defaults Not configured Command Modes ROUTE-MAP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands set automatic-tag set metric-type set tag Computes the tag - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 140
-value Parameters tag-value Enter a number as the tag. Range: zero (0) to 4294967295. Defaults Not configured Command Modes ROUTE-MAP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands set automatic-tag set metric set metric-type Computes the tag - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 141
Example Figure 6-14. show route-map Command Example FTOS#show route-map route-map firpo, permit, sequence 10 Match clauses: Set clauses: tag 34 FTOS# Related Commands route-map Configures a route map. Access Control Lists (ACL) | 141 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 142
142 | Access Control Lists (ACL) www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 143
MXL 10/40GbE Switch IO Module. Bare metal provisioning performs auto configuration using a configuration file and an approved version of the Dell Force10 You can configure the username root password if the configuration file is not received. Note: The MXL 10/40GbE Switch IO Module supports BMP on - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 144
: Download the configuration files from the server. Disable: Use the local start-up configuration files. Configure the auto save option for the downloaded configuration file. Defaults jump-start Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 145
Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module This command stops the jump-start process while the reload is in progress. However, if the system is downloading an FTOS image or configuration file, the process is stopped AFTER the DHCP release - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 146
146 | Bare Metal Provisioning www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 147
IP egress ACLs. Important Points to Remember • The Dell Force10 operating software (FTOS) versions 7.8.1.0 and later support CAM allocations on the MXL 10/40GbE Switch IO Module. • The CAM configuration is applied to entire system when you use CONFIGURATION mode commands. You must save the running - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 148
equal 13. On the MXL 10/40GbE Switch IO Module, there can be only one odd number of Blocks in the CLI configuration; the other Blocks must be in factors of two. For example, a CLI configuration of 5+4+2+1+1 Blocks is not supported; a configuration of 6+4+2+1 Blocks is supported. Ranges for the CAM - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 149
. Syntax cam-optimization [qos] Parameters qos Optimize CAM usage for Quality of Service (QoS) Command Modes Defaults CONFIGURATION Disabled Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module When this command is enabled, if a Policy Map containing - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 150
www.dell.com | support.dell.com Example Figure 8-1. show cam-acl (default) Command Example FTOS#show cam-acl -- Chassis Cam ACL -- Current Settings(in block sizes) L2Acl : 6 Ipv4Acl : 2 Ipv6Acl : 0 Ipv4Qos : 2 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 151
allocated for the egress ACL. Syntax show cam-acl-egress Defaults none Command Modes EXEC Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The display reflects the settings implemented with the cam-acl-egress command. Information Example Figure 8-3. show cam - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 152
www.dell.com | support.dell.com 152 | Content Addressable Memory (CAM) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 153
Center Bridging Overview Data center bridging (DCB) refers to a set of IEEE Ethernet enhancements that provide data centers with a single, robust, converged network to support multiple traffic types, including LAN, server, and storage traffic. The Dell Force10 operating software (FTOS) commands for - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 154
www.dell.com | support.dell.com ETS Commands • bandwidth-percentage • dcb-output • dcb-policy output • dcb-policy output stack-unit stack-ports dcbx detail advertise dcbx-appln-tlv On a DCBX port with a manual role, configure the application priority TLVs advertised on the interface to DCBX peers. - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 155
History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage To disable TLV transmission, use the no form of the command; for example, no advertise Information dcbx-appln-tlv iscsi. advertise dcbx-tlv On a DCBX port with a manual role, configure the PFC and ETS TLVs advertised - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 156
traffic in port queues. dcb-enable Enable DCB. Syntax dcb enable To disable DCB, use the no dcb enable command. Defaults none Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module DCB is not supported if link-level flow - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 157
16.1 Introduced on MXL 10/40GbE Switch IO Module As soon as you apply a DCB policy with PFC enabled on an interface, DCBX starts exchanging information with PFC-enabled peers. The IEEE802.1Qbb, CEE, and CIN versions of PFC TLV are supported. DCBX also validates PFC configurations received in TLVs - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 158
input policy, use the no dcb-policy input command. Parameters policy name Enter the input policy name with the PFC configuration to an ingress interface. Defaults none Command Modes INTERFACE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module If you - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 159
Enter the stack unit identification. Enter the policy name for the DCB input policy. Defaults None Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information The dcb-policy input stack-unit all command overwrites any previous - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 160
Enter the stack unit identification. Enter the policy name for the DCB output policy. Defaults none Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information The dcb-policy output stack-unit all command overwrites any previous - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 161
CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage If you configure PFC on a 40GbE port, count the 40GbE -queues {1-2} To remove the configuration for the PFC buffer on all port pipes in a specified stack unit, use the no dcb stack-unit stack-unit-id - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 162
manual: configures the port to operate only on administer-configured DCB parameters. The port does not accept a DCB configuration received form a peer or a local configuration source. Defaults Manual. Command Modes PROTOCOL LLDP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 163
History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information DCBX requires that you enable LLDP to advertise DCBX TLVs to peers. Configure DCBX operation at the INTERFACE level on a switch or globally on the switch.To verify the DCBX configuration on a port, use the show - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 164
www.dell.com | support.dell.com Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module description Enter a text description of the DCB policy (PFC input or ETS output). Syntax description text To remove the text description, use the no description command. Parameters text - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 165
at the global level only. Information Command Modes PROTOCOL LLDP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module iscsi priority-bits Configure the iSCSI priority advertised for the iSCSI protocol in application priority TLVs. Syntax iscsi priority-bits priority - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 166
www.dell.com | support.dell.com pfc link-delay Configure the link delay used configuration, use the no pfc mode on command. Defaults PFC mode is on. Command Modes DCB INPUT POLICY Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information By applying a DCB - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 167
values: 0 to 3. Defaults No lossless queues are configured. Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information The maximum number of lossless queues globally supported on the switch is two. Table 9-1 lists the dot1p priority - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 168
dell.com | support.dell.com Defaults none Command Modes DCB INPUT POLICY Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch none Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 169
. Enter the ETS policy name. Defaults none Command Modes DCB OUTPUT POLICY Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The ETS configuration associated with 802.1p priority traffic in a DCB output policy is used in DCBX Information negotiation with ETS - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 170
www.dell.com | support.dell.com Command Modes PRIORITY-GROUP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage 32 characters. Command Modes Command History CONFIGURATION Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information If an - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 171
configuration of bandwidth allocation and strict-queue scheduling is not supported at the same time for a priority group. If both are configured, the configured on MXL 10/40GbE Switch IO Module Related Commands priority-group qos-policy priority-list Create an ETS priority group. Configure the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 172
History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 9-1. show dcb Command Example FTOS# show dcb stack-unit 0 port-set 0 DCB Status : Enabled PFC Port Count : 56 (current), 56 (configured) PFC Queue Count : 2 (current), 2 (configured) Usage Specify a stack-unit - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 173
whether the port serves as the DCBX configuration source on the switch: true (yes) or false (no). Local DCBX Compatibility mode DCBX version accepted in a DCB configuration as compatible. In auto-upstream mode, a port can only received a DCBX version supported on the remote peer. Data Center - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 174
www.dell.com | support.dell.com Table 9-2. show interface dcbx detail Command Example Fields (continued) Field Description Local DCBX Configured DCBX version configured on the port: CEE, CIN, IEEE v2.5, or Auto (port mode auto-configures to use the DCBX version received from a peer). Peer - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 175
show interface ets Displays the ETS configuration applied to egress traffic on an interface, including priority groups the keyword detail for a full list of results. Command Mode CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Data Center Bridging | 175 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 176
www.dell.com | support.dell.com Example Figure 9-3. show interfaces ets summary Command Example FTOS(conf)# show interfaces te 0/0 ets Interface TenGigabitEthernet 0/0 Max Supported TC Groups is 4 Number of Traffic Classes is 8 Admin mode is on Admin Parameters: Admin is enabled TC-grp - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 177
Example show interfaces ets detail Command Example FTOS(conf)# show interfaces tengigabitethernet 0/0 ets Interface TenGigabitEthernet 0/0 Max Supported TC Groups is 4 Number of Traffic Classes is 8 Admin mode is on Admin Parameters : Admin is enabled TC-grp Priority# Bandwidth TSA 0 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 178
Fields Field Description Interface Interface type with stack-unit and port number. Max Supported TC Group Maximum number of priority groups supported. Number of Traffic Classes Number of 802.1p priorities currently configured. Admin mode ETS mode: on or off. When on, the scheduling and - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 179
show interface pfc Displays the PFC configuration applied to ingress traffic on an interface, including priorities and link delay. Syntax show a full list of results. Command Mode INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Data Center Bridging | 179 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 180
www.dell.com | support.dell.com Example Figure 9-4. show interface pfc Command Example FTOS# show interfaces unit and port number. PFC admin mode is on or off with a list of the configured PFC priorities. When the PFC admin mode is on, PFC advertisements are enabled to be sent and received - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 181
Priority list Remote Willing Status is enabled Operational status (enabled or disabled) of peer device for DCBX exchange of PFC configuration with a list of the configured PFC priorities. Willing status of peer device for DCBX exchange (Willing bit received in PFC TLV): enabled or disabled. Local - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 182
www.dell.com | support.dell.com show interface pfc statistics Displays counters for the PFC Command Mode CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 9-6. show qos dcb-input Command Example FTOS(conf)# show qos dcb-input dcb-input pfc - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 183
8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 9-8. show qos priority-groups Command Example Force10#Force10#show qos priority-groups priority-group ipc priority-list 4 set-pgid 2 show stack-unit stack-ports ets detail Displays the ETS configuration applied to egress traffic - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 184
www.dell.com | support.dell.com Parameters stack-unit port-number Enter the stack unit identification. Enter the port number. Command Mode CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 9-9. show stack-unit stack-ports ets detail - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 185
Parameters stack-unit port-number Enter the stack unit. Enter the port number. Command Mode CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 9-10. show stack-unit all stack-ports all pfc details Command Example FTOS(conf)# show stack - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 186
186 | Data Center Bridging www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 187
parameters to network end-stations (hosts) based on configuration policies determined by network administrators. An MXL Switch can operate as a DHCP server or DHCP client. As a DHCP client, the switch requests an IP address from a DHCP server. The following types of DHCP commands are described in - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 188
created for IP address conflicts. Enter this keyword to clear all the server counter information. Command Mode EXEC Privilege Default Command History Usage Information none Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Entering after clear ip dhcp binding, clears all the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 189
Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module dns-server Assign a DNS server to clients based on address pool. Syntax Parameters dns-server address [address2...address8] address Enter the a list of DNS servers that may service clients on the subnet. You may - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 190
www.dell.com | support.dell.com Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module excluded-address Prevent the server from leasing Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module hardware-address For manual configurations, specify the client hardware - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 191
Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module netbios-name-server Specify the NetBIOS windows internet naming service (WINS) name servers, in order of preference, that are available to Microsoft dynamic host configuration protocol (DHCP) clients. Syntax netbios-name - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 192
www.dell.com | support.dell.com MXL 10/40GbE Switch IO Module show ip dhcp binding Display the DHCP binding table. Syntax Command Mode show ip dhcp binding EXEC Privilege Default Command History none Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show ip dhcp configuration - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 193
.1 Introduced on MXL 10/40GbE Switch IO Module show ip dhcp server Display the DHCP server statistics. Syntax Command Mode Default show ip dhcp server statistics EXEC Privilege none Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Dynamic Host Configuration Protocol - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 194
IP address from a DHCP network server. Syntax Command Mode ip address dhcp INTERFACE Default The Ethernet is not configured to operate as a DHCP client and receive a dynamic IP address. Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The ip address - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 195
Other Commands supported by DHCP Client • clear ip dhcp Privilege Default None. Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module debug ip dhcp clients events Enable the display ; for example, fortygigabitethernet 0/2. Dynamic Host Configuration Protocol (DHCP) | 195 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 196
on MXL 10/40GbE Switch IO Module Usage Information When you enter the release dhcp command, although the IP address that was dynamically-acquired from a DHCP server is released from an interface, the ability to acquire a new DHCP server-assigned address remains in the running configuration for - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 197
Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module When you enter the renew dhcp command, a new dynamic IP address is acquired on the specified Ethernet interface for the renewed lease time. To display the currently configure dynamic IP address and lease time, enter - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 198
.dell.com | support.dell.com Parameters interface type slot/ port Display DHCP lease information on the specified interface. For a 10- -enabled interfaces on the switch. Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Commands to Configure Secure DHCP DHCP as - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 199
. ip dhcp snooping Enable DHCP snooping globally. Syntax Command Modes [no] ip dhcp snooping CONFIGURATION Default Disabled Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module When enabled, no learning takes place until you enable snooping on a VLAN - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 200
www.dell.com | support.dell.com Command Modes CONFIGURATION Default Command History none Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module : 2-4094 Enter the keyword ip followed by the IP address that the server is leasing. Enter the keyword interface followed by the type of interface to - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 201
Modes ip dhcp snooping database renew EXEC EXEC Privilege Default Command History none Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip dhcp snooping trust Configure an interface as trusted. Syntax Command Modes Default [no] ip dhcp snooping trust INTERFACE Untrusted Command - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 202
www.dell.com | support.dell.com 1 Use the command cam-acl l2acl from CONFIGURATION mode 2 Save the running-config to the previous-hop router. Command Modes CONFIGURATION Default Disabled Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show ip dhcp snooping Display - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 203
-address-validation Display the binding table. Display the interfaces configured with IP Source Guard. Command Modes EXEC EXEC Privilege Default none Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module clear ip dhcp snooping Clears the contents of - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 204
www.dell.com | support.dell.com 204 | Dynamic Host Configuration Protocol (DHCP) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 205
Snooping Overview In a converged Ethernet network, an MXL Switch can operate as an intermediate Ethernet bridge to switch uses dynamically-created ACLs to permit only authorized FCoE traffic to be transmitted between an FCoE end-device and an FCF. The following FTOS commands are used to configure - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 206
www.dell.com | support.dell.com Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module clear fip-snooping statistics Clears the statistics on the FIP packets snooped on all VLANs, a specified VLAN, or a specified port interface. Syntax clear - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 207
History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The maximum number of FCFs supported per FIP snooping-enabled VLAN is four. The maximum Information number of FIP snooping sessions supported per ENode server is 16. fip-snooping fc-map Configure the FC-MAP value used by - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 208
www.dell.com | support.dell.com show fip-snooping config Display the FIP snooping status and configured FC-MAP values. Syntax show fip-snooping config Command Mode • EXEC • EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 11-1. show - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 209
Enter the MAC address of the FCF to be displayed. Command Mode Command History • EXEC • EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 11-3. show fip-snooping fcf Command Example FTOS# show fip-snooping fcf FCF MAC FCF Interface ------- 54:7f - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 210
www.dell.com | support.dell.com Table 11-2. show fip-snooping fcf Command Field displayed. Command Mode Command History • EXEC • EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 11-4. show fip-snooping sessions Command Example FTOS#show fip-snooping - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 211
displayed. Enter the port channel number of the FIP packet statistics to be displayed. Command Mode Command History • EXEC • EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module FIP Snooping | 211 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 212
www.dell.com | support.dell.com Example Figure 11-5. show fip-snooping statistics Command Example FTOS# show fip-snooping statistics interface vlan 100 Number of Vlan Requests Number of Vlan - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 213
Figure 11-6. show fip-snooping statistics (port channel) Command Example FTOS# show fip-snooping statistics interface port-channel 22 Number of Vlan Requests :0 Number of Vlan Notifications :2 Number of Multicast Discovery Solicits :0 Number of Unicast Discovery Solicits :0 Number of FLOGI - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 214
.dell.com | support.dell.com failures due to Number of session failures due to hardware configuration that Hardware Config occurred on the interface show fip- EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 11-7. show fip-snooping - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 215
FIP snooping is enabled. Syntax show fip-snooping vlan Command Mode • EXEC • EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 11-8. show fip-snooping vlan Command Example FTOS# show fip-snooping vlan * = Default VLAN VLAN ---*1 100 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 216
216 | FIP Snooping www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 217
updates local databases regarding active VLAN members and through which port the VLANs can be reached. GVRP ensures that all participants on a bridged LAN maintain the same VLAN registration information. The VLAN registration information propagated by GVRP include both manually configured - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 218
to classify and analyze packets by VLAN protocols, you must manually configure protocol-based VLANs, and simply rely on GVRP for VLAN updates. But if the local bridge needs to know only History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 218 | GARP VLAN Registration (GVRP) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 219
. Syntax disable To re-enable GVRP, use the no disable command. Defaults Enabled Command Modes CONFIGURATION-GVRP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands gvrp enable protocol gvrp Enables GVRP on physical interfaces and LAGs. Accesses - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 220
www.dell.com | support.dell.com garp timers Set the intervals (in milliseconds) for sending GARP messages. Defaults Default as above Command Modes CONFIGURATION-GVRP Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Join Timer-Join messages announce - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 221
. Syntax gvrp enable To disable GVRP on the interface, use the no gvrp enable command. Defaults Disabled Command Modes CONFIGURATION-INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands disable Globally disables the GVRP. gvrp registration - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 222
8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module disable Globally disables the GVRP. show config Display the global GVRP configuration. Syntax show config Command Modes CONFIGURATION-GVRP Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module gvrp - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 223
milliseconds) for sending GARP messages. show gvrp Display the GVRP configuration. Syntax Parameters show gvrp [brief | interface] brief interface ( Example none EXEC EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 12-2. show gvrp brief Command Example - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 224
dell.com | support.dell.com Related Commands to GVRP Participants running on no ports show gvrp statistics Displays the GVRP statistics. show gvrp statistics Display the GVRP configuration History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 12-3. show gvrp - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 225
configuration. show vlan Display the global VLAN configuration. Syntax show vlan Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch * 1 Active U Te 3/20 U Te 5/20-21 G 10 Active G Po128(Te 5/49) (dynamically leanred vlan) FTOS# GARP - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 226
www.dell.com | support.dell.com 226 | GARP VLAN Registration (GVRP) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 227
Commands The Dell Force10 operating software (FTOS) supports internet group management protocol (IGMP) snooping version 2 and 3 on all Dell Force10 systems: -magma-snoop-10. • IGMP snooping is supported on all MXL 10/40GbE stack members. • IGMP snooping is not enabled by default on the switch. • A - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 228
.dell.com | support.dell.com Important Points to Remember for IGMP Querier • The IGMP snooping Querier supports version 2. • You must configure configured Command Modes INTERFACE (conf-if-interface-slot/port) Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 229
the new querier. Default: 125 seconds Range: 60 to 300 Defaults 125 seconds Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip igmp query-interval Change the transmission frequency of IGMP general queries sent by the Querier. Syntax ip igmp - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 230
www.dell.com | support.dell.com Parameters Defaults Command Modes Command History seconds 10 seconds INTERFACE Version 8.3.16.1 Enter the number of seconds for the maximum response time. Default: 10 seconds Range: 1 to 25 Introduced on MXL 10/40GbE Switch IO Module ip igmp version Manually set - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 231
fast leave, use the no igmp snooping fast-leave command. Defaults Not configured Command Modes INTERFACE VLAN - (conf-if-vl-n) Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Queriers normally send a certain number of queries when a leave message - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 232
www.dell.com | support.dell.com ip igmp snooping last-member-query-interval The last member query Modes INTERFACE VLAN Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip igmp snooping mrouter Statically configure a VLAN member port as a multicast router interface. - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 233
no ip igmp snooping querier command. Defaults Not configured Command Modes INTERFACE VLAN - (conf-if-vl-n) Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module This command enables the IGMP switch to send General Queries periodically. This is useful - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 234
www.dell.com | support.dell.com 234 | Internet Group Management Protocol (IGMP) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 235
\ 14 Interfaces Overview This chapter defines interface commands and is divided into the following sections: • Basic Interface Commands • Port Channel Commands • Time Domain Reflectometer (TDR) • UDP Broadcast Basic Interface Commands The following commands are for physical, loopback, and null - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 236
(SA) drop counters when MAC learning limit is configured on the interface. Defaults Without a specific interface specified, the command clears all interface counters. Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 236 | Interfaces - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 237
Information Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module On the MXL Switch, after you enter the clear counters dampening dampening Displays interface dampening information. Configures dampening on an interface. cx4-cable-length Configure the length of the cable to be - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 238
INTERFACE Command History Usage Information Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module This command only works on ports that the system recognizes as CX4 ports. The figure below shows an attempt to configure an XFP port with the command after inserting a CX4 converter - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 239
10/40GbE Switch IO Module Example Figure 14-5. dampening Command Example FTOS(conf-if-tengig-3/2)#dampening 20 800 4500 120 FTOS(conf-if-tengig-3/2)# Usage Information With each flap, FTOS penalizes the interface by assigning a penalty (1024) that decays exponentially depending on the configured - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 240
www.dell.com | support.dell.com description Assign a descriptive text string to the interface. Syntax in both directions. Defaults Not configured Command Modes INTERFACE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module This command applies to - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 241
Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The globally assigned 48-bit Multicast address 01-80-C2-00-00-01 is used to send and receive pause frames. To allow full duplex flow control, stations implementing the pause operation instruct the MAC to enable reception of - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 242
no shutdown ... Table 14-1 lists how FTOS negotiates the flow control values between two Dell Force10 chassis connected back-to-back using 10G copper ports. Table 14-1. Negotiated Flow Control Values Configured LocRxConf off LocTxConf off RemoteRxConf off off on on RemoteTxConf off on off on - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 243
interface, enter the keyword fortyGigE followed by the slot/port information. Defaults Not configured. Command Modes CONFIGURATION Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-7. interface Command Example FTOS(conf)#interface tengig 0/0 FTOS(conf - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 244
number Enter a number as the interface number. Range: 0 to 16383. Defaults Not configured. Command Modes CONFIGURATION Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-8. interface loopback Command Example FTOS(conf)#interface loopback 1655 FTOS - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 245
Parameters number Enter zero (0) as the Null interface number. Defaults Not configured; number = 0 Command Modes CONFIGURATION Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-10. interface null Command Example FTOS(conf)#interface null 0 FTOS(conf - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 246
VLAN, enter the keyword vlan followed by a number from 1 to 4094. Defaults none Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module When creating an interface range, interfaces appear in the order they are entered; they are - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 247
shows how to use commas to add VLAN and port-channel interfaces to the range. Example Figure 14-16. Multiple Range Bulk Configuration with VLAN and port channel FTOS(conf-if)# interface range tengigabitethernet 5/1 - 23, tengigabitethernet 1/1 - 2, Vlan 2 - 100 , Port 1 - 25 FTOS(conf-if-range)# no - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 248
dell.com | support.dell.com interface range macro (define) Defines a macro for an interface range and then saves the macro in the running configuration . Defaults none Command Modes CONFIGURATION Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-17 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 249
range macro name Parameters name Enter the name of an existing macro. Defaults none Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-18 runs the macro named test that was defined earlier. Example Figure - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 250
the interface type as cr4 with autonegotiation disabled. Defaults Not configured Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module If interface type is configured as CR4 with auto-negotiation enabled, then the peer should - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 251
seconds Defaults Enabled Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information When you configure keepalive, the system sends a self-addressed packet out of the configured interface to verify that the far end of a WAN link is up - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 252
www.dell.com | support.dell.com Example Figure 14-20. monitor Command Example of a Single Interface systest-3 Monitor time: 00:00:06 Refresh Intvl.: 2s Time: 03:26:26 Interface: - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 253
on MXL 10/40GbE Switch IO Module Usage Information If the packet includes a Layer 2 header, the difference between the link MTU and IP MTU (ip mtu command) must be enough bytes to include the Layer 2 header: • The IP MTU will get adjusted automatically when the Layer 2 MTU is configured with - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 254
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The no negotiation auto command is only available if you first manually set the speed of a port to Information 10Mbits or 100Mbits. The negotiation auto command provides a mode option for configuring an individual port to forced - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 255
Figure 14-22. Display Auto-negotiation Master/Slave Setting (partial) FTOS#show interfaces configured TenGigabitEthernet 13/18 is up, line protocol is up Hardware is Dell Force10Eth, address is 00:01:e8:05:f7:fc Current address is 00:01:e8:05:f7:fc Interface index is 474791997 Internet address is - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 256
www.dell.com | support.dell.com Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-23. portmode hybrid Configuration Example FTOS(conf)#interface tengig 0/20 FTOS(conf-if-te-0/20)#no shut FTOS(conf-if-te-0/20)#portmode hybrid FTOS(conf-if-te-0/20)# - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 257
conf-if-te-0/20#sw FTOS(conf-if-te-0/20)#int vlan 10 FTOS(conf-if-vl-10)#int tengig 0/20 FTOS(conf-if-vl-20)# untag tengig 0/20 Commands show interfaces switchport vlan-stack trunk Displays the configuration of switchport (Layer 2) interfaces on the switch. Specifies an interface as a trunk port to - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 258
www.dell.com | support.dell.com rate-interval Configure the traffic sampling interval on the selected interface. INTERFACE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The configured rate interval is displayed, along with the collected traffic data - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 259
8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-27. show config (Bulk Configuration) Command Example FTOS( MXL Switch, the show interface output displays incorrect rate information details over time for link monitoring when the rate-interval is configured for 5 seconds. Dell Force10 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 260
www.dell.com | support.dell.com Note: After the counters are cleared, the line-rate Port FTOS#show interfaces tengigabitethernet 2/0 TenGigabitEthernet 2/0 is up, line protocol is up Hardware is Dell Force10Eth, address is 00:01:e8:05:f7:3a Interface index is 100990998 Internet address is 213 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 261
Table 14-5. Lines in show interfaces Command Example Line Input Statistics: Output Statistics: Rate information... Time since... Description Displays all the input statistics including: • Number of packets and bytes into the interface • Number of packets with IP headers and VLAN tagged headers. - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 262
www.dell.com | support.dell.com Example Figure 14-29. show interfaces Command Example :05 Pluggable media not present Interface index is 235159752 Internet address is 10.11.209.87/16 Mode of IP Address Assignment : MANUAL DHCP Client-ID: mgmt001ec9f10005 Virtual-IP is not set Virtual-IP IPv6 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 263
Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-31. show interfaces configured Command Example FTOS#show interfaces configured TenGigabitEthernet 13/18 is up, line protocol is up Hardware is DellForce10Eth - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 264
www.dell.com | support.dell.com show configured and the number of interfaces suppressed, if any. (OPTIONAL) Enter the keyword detail to display detailed interface dampening data. Defaults none Command Modes EXEC Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 265
show interfaces description Display the descriptions configured on the interface. Syntax show interfaces [interface] EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-33. show interfaces description Command Example FTOS - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 266
on MXL 10/40GbE Switch IO Module Figure 14-34. show interfaces status Command Example FTOS#show interfaces stack-unit 0 TenGigabitEthernet 0/1 is down, line protocol is down Hardware is DellForce10Eth, address is 00:1e:c9:f1:00:05 Current address is 00:1e:c9:f1:00:05 Server Port AdminState - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 267
Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-35. show interfaces 0/7 Down Auto Auto -- Te 0/8 Up 10000 Mbit Full -- Te 0/9 Down Auto Auto -- Te 0/10 Down Auto Auto -- Te 0/11 Down Auto Auto -- Te 0/12 Down Auto Auto -- Te 0/13 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 268
www.dell.com | support.dell.com show interfaces switchport Display only virtual and physical to 5 Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 14-36. show interfaces switchport Command Example FTOS#show - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 269
if the VLAN tagged ("True"), untagged ("False"), or hybrid ("Hybrid"), which supports both untagged and tagged VLANs by port 13/0. Lists the VLANs to which the interface show interfaces show interfaces transceiver Configures a physical interface on the switch. Displays Layer 3 information about the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 270
www.dell.com | support.dell.com show interfaces transceiver Display the physical status and slot/port information. Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage See Figure 14-37 for an command example and see Table 14 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 271
Example Figure 14-37. show interfaces tengigabitethernet transceiver Command Example FTOS#show interfaces tengigabitethernet 1/0 transceiver SFP is present. SFP 0 Serial Base ID fields SFP 0 Id = 0x03 SFP 0 Ext Id = 0x04 SFP 0 Connector = 0x07 SFP 0 Transciever Code = 0x00 0x00 0x00 0x01 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 272
www.dell.com | support.dell.com Table 14-8. Diagnostic Data in show interfaces transceiver Line Description Rx Power measurement type Output depends on the vendor, typically either "Average" or "OMA" ( - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 273
Table 14-8. Diagnostic Data in show interfaces transceiver (continued) Line Description Tx Power Rx Power Data Ready state Bar Rx LOS state Tx Fault state Rate Select state RS state Tx Disable state Temperature High Alarm Flag Voltage High Alarm Flag Tx Bias High Alarm Flag Tx Power High Alarm - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 274
www.dell.com | support.dell.com Table 14-8. Diagnostic Data in show interfaces transceiver ( interfaces configured using the interface range command. Syntax show range Command Mode INTERFACE RANGE (config-if-range) Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 275
Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The shutdown command marks a physical interface The shutdown and description commands are the only commands that you can configure on an interface that is a member of a port channel. Related - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 276
| support.dell.com Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information This command is found on the 1000/10000 Base-T Ethernet interfaces. When you enable auto, the system performs and automatic discovery to determine the optics installed and configure - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 277
by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Defaults Not configured. Command Modes INTERFACE PORTCHANNEL Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Interfaces | 277 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 278
www.dell.com | support.dell.com Usage Information Use the interface port-channel command to access this command. You cannot add an interface to a Port Channel if the interface contains an IP address in its configuration. Link MTU and IP MTU considerations for Port Channels are: • All members must - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 279
Channel interface, enter the keyword port-channel followed by a number: Range: 1-128 Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 14-40. interface port-channel Command Example FTOS(conf)#int - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 280
"oper up" status. Range: 1 to 16 Default: 1 Defaults 1 Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage If you use this command to configure the minimum number of links in a LAG that must be in "oper up" Information status, the LAG must - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 281
1 no ip address shutdown FTOS(conf-if-po-1)# Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show interfaces port-channel Display information on configured Port Channel groups. Syntax show interfaces port-channel [channel-number] [brief] Parameters channel-number - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 282
www.dell.com | support.dell.com Example Figure 14-42. show interfaces port-channel pkts 0 Multicasts, 0 Broadcasts, 0 Unicasts 0 throttles, 0 discarded, 0 collisions Table 14-10. show interfaces port-channel Command Example Fields Field Port-Channel 1... Hardware is... Port-channel is part - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 283
Table 14-10. show interfaces port-channel Command Example Fields (continued) Field rate is displayed in bits and packets per second. Displays the time since the last change in the configuration of this interface. Figure 14-43. show interfaces port-channel brief Command Example FTOS#show int po 1 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 284
www.dell.com | support.dell.com Time Domain Reflectometer (TDR) Time domain reflectormeter (TDR) is useful for troubleshooting an interface none Command Modes EXEC Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information The interface must be enabled to run - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 285
interface. Defaults none Command Modes EXEC Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-44. show tdr tengigabitethernet Command Example FTOS#show tdr tengigabitethernet 10/47 Time since last test: 00:00:02 Pair A, Length: OK Status: Terminated - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 286
www.dell.com | support.dell.com UDP Broadcast The user datagram protocol (UDP) broadcast feature is Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip udp-broadcast-address ip udp-helper udp-port show ip udp-helper Configures a UDP IP address for broadcast Enables - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 287
Introduced on MXL 10/40GbE Switch IO Module Enables debug and display the debug information on a console. Displays the configured UDP helper(s) port numbers 67/68 is unicast relayed to the DHCP server as per the ip helper-address configuration. This occurs regardless of whether the ip udp-helper - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 288
Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module debug ip udp-helper ip udp-broadcast-address ip udp-helper udp-port Enables debug and display the debug information on a console. Configures a UDP IP address for broadcast. Enables the UDP broadcast - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 289
-list • ip domain-lookup • ip domain-name • ip helper-address • ip helper-address hop-count disable • ip host • ip max-frag-count • ip name-server • ip proxy-arp • ip route • ip source-route • ip unreachables • management route • show arp • show arp retries • show hosts • show ip cam stack-unit - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 290
a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage You cannot use Class D or Class E IP addresses or zero IP - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 291
number Parameters number Enter the number of retries. Range: 5 to 20. Default: 5 Defaults 5 Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Retries are 20 seconds apart. Information Related Commands show arp retries Displays - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 292
www.dell.com | support.dell.com clear arp-cache Clear the dynamic ARP entries from a with extreme caution. Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module clear host Remove one or all dynamically learnt host table entries. Syntax - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 293
-number Enter the stack-unit number. Range: 0 to 5 Command Mode EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information Use this command to clear Layer 3 CAM inconsistencies. Caution: Executing this command causes traffic disruption - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 294
www.dell.com | support.dell.com Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module debug arp View information on ARP transactions. Syntax debug arp [interface] [count value] To stop debugging ARP transactions, use the no debug arp - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 295
hop-count disable Specifies the destination broadcast or host address for the DHCP server request. Disables the hop-count increment for the DHCP relay agent. debug Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module IPv4 Routing | 295 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 296
www.dell.com | support.dell.com Example Figure 15-2. debug ip icmp Command Example (Partial) ICMP: echo request rcvd from keyword vlan followed by a number from 1 to 4094. Command Mode EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 296 | IPv4 Routing - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 297
226, sending TCP src=23, dst=40869, seq=2112994896, ack=606901739, win=8192 ACK PUSH IP: s=10.1.2.216 (Ma 0/0), d=10.1.2.255, len 78, rcvd UDP src=0, dst=0 IP: s=10.1.2.62 (local), d=10.1.2.3 (Ma 0/0), len 1500, sending fragment IP Fragment, Ident = 4741, fragment offset = 0 ICMP type=0, code=0 IP - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 298
) Enter the keyword secondary to designate the IP address as the secondary address. Defaults Not configured. Command Modes INTERFACE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module You must be in INTERFACE mode before you add an IP address to an - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 299
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip domain-list Configure names to complete unqualified host server with the ip name-server command. • enable DNS with the ip domain-lookup command. To view current bindings, use the show hosts command. To view DNS related configuration - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 300
. Defaults Disabled. Command Mode CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage To fully enable DNS, also specify one or more domain name servers with the ip name-server Information command. FTOS does not support sending DNS queries over - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 301
Enter an IP address in dotted decimal format (A.B.C.D). Defaults Not configured. Command Modes INTERFACE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module You can add multiple DHCP servers by entering the ip helper-address command multiple times. If - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 302
of fragments allowed. Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module To avoid denial of service (DOS) attacks, keep the number of fragments allowed for re-assembly low. ip name-server Enter up to 6 IPv4 addresses - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 303
to be used. Separate the addresses with a space. Defaults No name servers are configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage FTOS does not support sending DNS queries over a VLAN. DNS queries are sent out all other - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 304
www.dell.com | support.dell.com interface distance permanent tag tag-value Enter the the route. Range: 1 to 4294967295 Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Using the following example of - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 305
, use the no ip unreachables command. Defaults Disabled Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module management route Configure a static route that points to the Management interface or a forwarding router. Syntax management route {ipv4 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 306
www.dell.com | support.dell.com show manually. (OPTIONAL) Enter the keyword dynamic to view dynamic entries. (OPTIONAL) Enter the keyword summary to view a summary of ARP entries. Command Modes EXEC Privilege Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 307
10 pv 200 CP Internet 5.5.5.10 - 00:01:e8:44:99:55 - Vl 10 CP Internet 10.1.2.4 1 00:01:e8:d5:9e:e2 Ma 0/0 - CP Internet 10.10.10.4 1 00:01:e8:d5:9e:e2 Ma 0/0 - CP Internet 10 in the ARP table. Lists the total number of configured or static ARP entries. Lists the total number of - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 308
configuration. Syntax show hosts Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 15-8. show hosts Command Example FTOS#show hosts Default domain is not set Name/address lookup uses static mappings Name servers - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 309
Type Address Description Classifies the entry as one of the following: • perm - the entry was manually configured and will not time out • temp - the entry was learned and will time out after EXEC EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module IPv4 Routing | 309 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 310
www.dell.com | support.dell.com Example Figure 15-9. show ip cam stack-unit Command Example FTOS#show ip cam stack-unit 0 port-set 0 10.10.10.10/32 longer-prefixes Destination EC CG V C VId Mac-Addr Port 10.10.10.10 0 011 0 00:00:00:00:00:00 3f01 CP FTOS# Table 15-5. show ip cam - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 311
summary to view the total number of prefixes in the FIB. Command Mode EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 15-12. show ip fib stack-unit Command Example FTOS#show ip fib stack-unit 0 Destination Gateway First - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 312
an IP address is assigned. (OPTIONAL) Enter the keyword configuration to display the physical interfaces with non-default configurations only. Command Modes Command History Example EXEC EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 15-13. show ip interface - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 313
if configured. Indicates if the hardware is functioning properly. Displays Manual if the configuration is read from the saved configuration. States to view all IP addresses assigned to all Management interfaces on the switch. (OPTIONAL) Enter the keyword connected to view only routes directly - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 314
www.dell.com | support.dell.com summary static (OPTIONAL) Enter the keyword summary to view a table also. Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 15-15. show ip management route Command Example FTOS#show ip - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 315
) Enter the keyword static to view only routes configured by the ip route command. (OPTIONAL) Enter the keyword summary. See show ip route summary. Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 15-17. show ip route - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 316
dell.com | support.dell. Gateway Dist/Metric Last Change ----------- ------- *S 0.0.0.0/0 via 10.10.91.9, Te 1/2 1/0 3d2h FTOS# Table 15-9. route is configured. Identifies if the route has a specified distance or metric. Identifies when the route was last changed or configured. show ip - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 317
Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip prefix-list show ip prefix-list summary Enters the CONFIGURATION-IP PREFIX-LIST mode and configure a prefix list. Displays a summary of the configured prefix lists. Example Figure 15-19. show ip - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 318
dell.com | support.dell protocols (OSPF, RIP) are configured and routes are advertised, then switch. show ip traffic View IP, ICMP, UDP, TCP, and ARP traffic statistics. Syntax show ip traffic Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 319
, 0 other Sent: 0 redirects, 1 unreachable, 0 echo, 0 echo reply 0 mask requests, 0 mask replies, 0 quench, 0 timestamp 0 info reply, 0 time exceeded, 0 parameter problem UDP statistics: Rcvd: 2938110 total, 14 checksum errors, 1 no port 0 short packets, 0 bad length, 1883908 no port broadcasts - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 320
www.dell.com | support.dell.com Usage Information The F10 monitoring MIB provides access to the statistics described below TCP traffic through the switch. Syntax show tcp statistics Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 320 | - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 321
) with data after window 0 packets after close 0 window probe packets, 0 window update packets 0 dup ack packets, 0 ack packets with unsend data 6671 ack packets ( Displays the number of packets and bytes received that exceed the switch's window size. 0 packets after close Displays the number of - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 322
www.dell.com | support.dell.com Table 15-13. show packet delayed. Displays the number of window probe and update packets sent. Displays the number of TCP connections TCP connections closed, dropped. Displays the number of times the switch tried to re-send data and the number of connections dropped - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 323
quality-of-service (QoS) treatment for iSCSI storage traffic on an MXL Switch. The following FTOS commands are used to configure and verify PROTOCOL LLDP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage You can configure iSCSI TLVs to be sent either globally or - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 324
www.dell.com | support.dell.com iscsi aging time Set the aging time for iSCSI session. Valid values: 5 to 43,200 minutes. Defaults 10 minutes. Command Mode CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module iscsi cos Set the QoS policy that will be - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 325
Command Modes PROTOCOL LLDP (only on global, not on interface) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module iscsi profile-compellant Configure the auto-detection of Compellent arrays on a port. Syntax iscsi profile-compellent Defaults Compellent disk arrays are - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 326
the IP address of the iSCSI target. Defaults 860, 3260. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information You can configure up to 16 target TCP ports on the switch in one command or multiple commands. When you use the no - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 327
the switch. Syntax show iscsi sessions Command Mode EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO run iscsi Display the currently configured iSCSI settings. Display detailed information on active iSCSI sessions on the switch. show run iscsi iSCSI - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 328
www.dell.com | support.dell.com show iscsi sessions detailed Display detailed information on active iSCSI sessions on the switch. Syntax show iscsi EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 16-3. show iscsi sessions detailed - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 329
run iscsi Command Mode EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands show iscsi show iscsi sessions show iscsi sessions detailed Display the currently configured iSCSI settings. Display information on active iSCSI sessions on the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 330
330 | iSCSI Optimization www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 331
Control Protocol (LACP) Overview This chapter contains commands for Dell Force10's implementation of the link aggregation control protocol (LACP) for EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Link Aggregation Control Protocol (LACP) | 331 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 332
www.dell.com | support.dell.com Related Commands show lacp Displays the LACP configuration debug lacp Debug LACP (configuration, events etc.) Syntax debug lacp [config | History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module lacp long-timeout Configure a long timeout period (30 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 333
Range: 1 to 65535 Default: 32768 Defaults 32768 Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module lacp system-priority Configure the LACP system priority. Syntax Parameters lacp system-priority priority-value priority-value Enter the system - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 334
www.dell.com | support.dell.com Parameters number active passive MXL 10/40GbE Switch IO Module Usage Information Table 17-1 lists the LACP modes. Table 17-1. LACP Modes Mode active passive off Function An interface is in an active negotiating state in this mode. LACP runs on any link configured - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 335
-channel Displays the LACP information. Displays information on configured Port Channel groups. show lacp Display the LACP matrix EXEC EXEC Privilege Command History Example 1 Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 17-2. show lacp port-channel-number Command Example - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 336
www.dell.com | support.dell.com Example 3 Figure 17-4. show lacp counter Command Example FTOS#show lacp 1 counters LACP PDU Marker PDU Unknown Illegal Port Xmit Recv Xmit Recv Pkts Rx Pkts Rx TenGig 10/6 200 200 0 0 0 0 FTOS# Related Commands clear lacp counters show - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 337
contains the following sections: • MAC Addressing Commands • Virtual LAN (VLAN) Commands MAC Addressing Commands The following commands are related to configuring, managing, and viewing MAC addresses: • clear mac-address-table dynamic • mac-address-table aging-time • mac-address-table static • mac - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 338
www.dell.com | support.dell.com interface interface vlan vlan-id Command Modes EXEC Privilege 0. Range: 10 - 1000000 Default: 1800 seconds Defaults 1800 seconds Command Modes CONFIGURATION Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module mac - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 339
Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module For details about using this command, refer to the "NIC Teaming" section of the Layer 2 chapter in the FTOS Configuration Guide. mac learning-limit Limit the maximum number of MAC addresses - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 340
to allow configuring the sticky mac feature along with the learning limit. Defaults The default behavior is dynamic. "Static" means manually entered addresses, which do not age. Command Modes INTERFACE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 341
History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module This is supported on physical interfaces, static LAGs, and LACP } To disable a configuration, use the no mac learning-limit station-move-violation command, followed by the configured keyword. Parameters log - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 342
dell.com | support.dell.com Usage This is supported Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show cam mac stack-unit Display switch. (OPTIONAL) Enter the keyword static to display only those MAC address specifically configured on the switch. 342 | Layer - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 343
EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show mac-address-table Display the MAC address the keyword static to display only those MAC address specifically configured on the switch. Optionally, you can also add one of these combinations - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 344
www.dell.com | support.dell. Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 18-1. show mac-address-table nn:nn:nn:nn format. Lists whether the MAC address was manually configured (Static) or learned dynamically (Dynamic). Displays the interface type - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 345
16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 18-3. show mac-address-table aging-time Command Example FTOS#show mac-address-table aging-time Mac-address-table aging time : 1800 FTOS# Related Commands show mac-address-table Displays the current MAC address configuration. Layer 2 | 345 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 346
www.dell.com | support.dell.com show mac learning-limit Display MAC address learning limits set 128 Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 18-4. show mac learning-limit Command Example FTOS#show mac - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 347
interfaces. You can configure an IP address and Layer 3 protocols on a VLAN called Inter-VLAN routing. FTP, TFTP, ACLs, and SNMP are not supported on a VLAN. Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show vlan Displays VLAN configuration. Layer 2 | 347 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 348
www.dell.com | support.dell.com default vlan-id Specify a VLAN as the Default VLAN. Default: 1 Defaults The Default VLAN is VLAN 1. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information To return VLAN 1 as the Default VLAN, - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 349
a no ip address mtu 2500 shutdown FTOS(conf-if-vl-100)# Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show vlan Display the current VLAN configurations on the switch. Syntax show vlan [brief | id vlan-id | name vlan-name] Parameters brief (OPTIONAL) Enter the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 350
. (OPTIONAL) Enter the keyword name followed by the name configured for the VLAN. Only information on the VLAN named is displayed. Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 18-6. show vlan Command Example FTOS - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 351
FTOS# Q Ports U TenGig 1/22 Related Commands vlan-stack compatible interface vlan Enables the Stackable VLAN feature on the selected VLAN. Configures a VLAN. tagged Add a Layer 2 interface to a VLAN as a tagged interface. Syntax tagged interface To remove a tagged interface from a VLAN, use - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 352
followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Defaults Not configured Command Modes INTERFACE VLAN Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 352 | Layer 2 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 353
if none of the tracking interfaces are operationally UP. If you do not configure the track ip command, the VLAN's Layer 3 operational state depends on all Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Untagged interfaces can only belong to one - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 354
354 | Layer 2 www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 355
tools to discover and make available a physical topology for network management. The Dell Fore10 operating software (FTOS) implementation of LLDP is based on IEEE standard refer to the Link Layer Discovery Protocol chapter of the FTOS Configuration Guide. Link Layer Discovery Protocol (LLDP) | 355 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 356
www.dell.com | support.dell.com advertise dot1-tlv Advertise dot1 TLVs (Type, Length, Value). Syntax -lldp) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands protocol lldp (Configuration) debug lldp interface show lldp neighbors show running-config - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 357
system-description to advertise the system description TLVs. Defaults none Command Modes CONFIGURATION (conf-lldp) Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module All three command options - system-capabilities, system-description, and system - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 358
dell.com | support.dell.com Parameters interface Defaults none Command Modes EXEC Privilege Command History Version 8.3.16.1 Enter the following keywords and slot/port or number information: • For a 10 slot/port information. Introduced on MXL 10/40GbE Switch IO Module debug lldp interface - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 359
its peer. Rate: 5 to 180 seconds Default: 30 seconds Defaults 30 seconds Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module mode Set LLDP to receive or transmit. Syntax mode {tx | rx} To - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 360
www.dell.com | support.dell.com Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands protocol lldp (Configuration) show lldp neighbors Enables LLDP globally. Displays the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 361
Command Modes INTERFACE (conf-if-interface-lldp) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage You must enable LLDP globally from CONFIGURATION mode before you can configure it on an Information interface. This command places you in LLDP mode on the interface - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 362
www.dell.com | support.dell.com Command Modes Command History Example EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 19-2. show lldp statistics Command Example FTOS#show lldp statistics --------- LLDP GLOBAL STATISTICS ON CHASSIS -----------Total number of - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 363
-MED endpoint device, and supports IEEE 802.1AB (LLDP) and TIA-1057 (LLDP-MED). The Dell Force10 system is an LLDP-MED Configure the system to advertise a separate limited voice service for a guest user with their own IP telephony handset or other appliances that support interactive voice services - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 364
.dell.com DSCP_value priority-tagged number Enter the DSCP value. Range: 0 to 63 Enter the keyword priority-tagged followed the Layer 2 priority. Range: 0 to 7 Defaults Unconfigured Command Modes CONFIGURATION (conf-lldp) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 365
Identification Number (elin) numeric location string. Range: 10 to 25 characters Defaults unconfigured Command Modes CONFIGURATION (conf-lldp) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage ECS - Emergency Call Service such as defined by TIA or National - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 366
Introduced on MXL 10/40GbE Switch IO Module Related Commands debug lldp interface show lldp neighbors show lldp neighbors Debugs LLDP Displays the LLDP neighbors Displays the LLDP running configuration advertise med streaming-video Configure the system to advertise streaming video services for - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 367
lldp neighbors Introduced on MXL 10/40GbE Switch IO Module Debugs LLDP Displays the LLDP neighbors Displays the LLDP running configuration advertise med video-conferencing Configure the system to advertise dedicated video conferencing and other similar appliances that support real-time interactive - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 368
.dell.com | support.dell.com Command Modes CONFIGURATION (conf-lldp) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch configuration advertise med voice Configure the system to advertise a dedicated IP telephony handset or other appliances supporting interactive voice services. - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 369
(conf-lldp) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands debug lldp interface show lldp neighbors show lldp neighbors Debugs LLDP Displays the LLDP neighbors Displays the LLDP running configuration Link Layer Discovery Protocol (LLDP) | 369 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 370
www.dell.com | support.dell.com 370 | Link Layer Discovery Protocol (LLDP) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 371
Tree Protocol (MSTP) Overview The multiple spanning tree protocol (MSTP), as implemented by the Dell Force10 operating software (FTOS), conforms to IEEE 802.1s. Commands The following commands configure and monitor MSTP: • debug spanning-tree mstp • disable • edge-port bpdufilter default • hello - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 372
www.dell.com | support.dell.com debug spanning-tree mstp Enable debugging of the multiple events. Command Modes EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 20-1. debug spanning-tree mstp bpdu Command Example FTOS#debug spanning - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 373
the no edge-port bpdufilter default command. Defaults Disable Command Modes MULTIPLE SPANNING TREE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module forward-delay The amount of time the interface waits in the Blocking State and the Learning State before transitioning - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 374
www.dell.com | support.dell.com Parameters seconds Enter the number of seconds the interface waits Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands max-age hello-time Changes the wait time before MSTP refreshes protocol configuration information. Changes the time - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 375
40 Default: 20 Defaults 20 hops Command Modes MULTIPLE SPANNING TREE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The max-hops is a configuration command that applies to both the IST and all MST instances in the MSTP region. The BPDUs sent out by - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 376
on MXL 10/40GbE Switch IO Module For two MSTP switches to be within the same MSTP region, the switches must share the same region name (including matching case). Related Commands msti revision Maps the VLAN(s) to an MST instance. Assigns the revision number to the MST configuration. 376 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 377
Defaults Not configured. Command Modes CONFIGURATION Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module FTOS Configuration Guide. Related Commands disable Disables MSTP. revision The revision number for the multiple spanning tree configuration Syntax - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 378
www.dell.com | support.dell.com show config View the current configuration for the mode. Only non-default values are shown. Syntax Command Modes show config MULTIPLE SPANNING TREE Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 20-3. show config - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 379
command. Information Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 20-5. show spanning-tree msti Priority 32768, Address 0001.e800.0204 We are the root of MSTI 0 (CIST) Configured hello time 2, max age 20, forward delay 15, max hops 20 Bpdu filter - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 380
www.dell.com | support.dell.com Example 2 Figure 20-6. show spanning-tree msti Command Example with 2, max age 20, forward delay 15, max hops 20 Bridge Identifier has priority 32768, Address 0001.e801.6aa8 Configured hello time 2, max age 20, forward delay 15, max hops 20 We are the root of MSTI 0 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 381
on the interface. Default: Enable Defaults Command Modes Enable INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module spanning-tree msti Configure multiple spanning tree instance cost and priority for an interface. Syntax spanning-tree msti instance {cost cost - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 382
www.dell.com | support.dell.com Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module spanning-tree mstp Configures a Layer 2 MSTP interface as an edge port with (optionally) a BPDU guard, a BPDU filter or enables the root guard feature on the interface. Syntax spanning- - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 383
Syntax tc-flush-standard To disable, use the no tc-flush-standard command. Defaults Disabled Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information By default, FTOS implements an optimized flush mechanism for MSTP. This helps - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 384
www.dell.com | support.dell.com 384 | Multiple Spanning Tree Protocol (MSTP) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 385
MXL 10/40GbE Switch IO Module platform supports open shortest path first (OSPFv2) only. Up to 16 OSPF instances can be run simultaneously on the MXL Switch OSPFv2 Commands The Dell Force10 implementation of OSPFv2 is based on IETF RFC 2328. The following commands allow you to configure and enable - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 386
www.dell.com | support.dell.com • ip ospf message-digest-key • ip ospf mtu-ignore • ip ospf network • ip ospf priority • ip ospf retransmit-interval • ip ospf transmit-delay • log- - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 387
external route metric. Range: zero (0) to 65535. Defaults Command Modes cost = 1; no areas are configured. ROUTER OSPF Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module In FTOS, cost is defined with reference to bandwidth. Related Commands area - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 388
www.dell.com | support.dell.com area range Summarize routes matching an address/mask at an area Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Use this command to configure all routers and access servers within a stub. 388 | Open Shortest Path - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 389
Commands router ospf Enters the ROUTER OSPF mode to configure an OSPF instance. auto-cost Specify how the OSPF per second. Command Modes ROUTER OSPF Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module clear ip ospf Clear all OSPF routing tables. Syntax clear ip - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 390
www.dell.com | support.dell.com clear ip ospf statistics Clear the packet statistics in interfaces and Modes none EXEC Privilege Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show ip ospf statistics Displays OSPF statistics. debug ip ospf Display - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 391
Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 21-1. debug ip update • 5 - link state acknowledgement Displays the packet length. Displays the OSPF router ID. Displays the Autonomous System ID. Displays the OSPF checksum. States if OSPF authentication is configured - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 392
www.dell.com | support.dell.com support TOS) • T - (router cannot support TOS) Displays the amount of time configured for the HELLO interval. Displays the amount of time configured Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module redistribute Redistributes routes from - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 393
Modes none ROUTER OSPF Command History Related Commands Version 8.3.16.1 show ip ospf asbr Introduced on MXL 10/40GbE Switch IO Module Displays the VLAN configuration. distance Define an administrative distance for particular routes to a specific IP address. Syntax distance weight [ip - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 394
www.dell.com | support.dell.com Parameters weight ip-address mask access-list-name Defaults of an IP standard access list, up to 140 characters. Introduced on MXL 10/40GbE Switch IO Module distance ospf Configure an OSPF distance metric for different types of routes. Syntax distance ospf [ - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 395
routes are distributed.* (OPTIONAL) Enter the keyword static to specify that only manually configured routes are distributed. Defaults Not configured. Command Modes ROUTER OSPF Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Open Shortest Path First (OSPFv2) | 395 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 396
consultation with Dell Force10 Technical Support. flood-2328 Enable RFC-2328 flooding behavior. Syntax flood-2328 To disable, use the no flood-2328 command. Defaults Disabled Command Modes ROUTER OSPF Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 397
format, of the restart router that will not act as a helper during graceful restart. Defaults Not Configured Command Modes ROUTER OSPF Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip ospf auth-change-wait-time OSPF provides a grace period while OSPF changes its - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 398
www.dell.com | support.dell.com ip ospf authentication-key Enable authentication and set an authentication Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module If this command is not configured, cost is based on the auto-cost command. When you configure OSPF over multiple vendors, use - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 399
the interval. Range: 1 to 65535. Default: 40 seconds. Defaults 40 seconds Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage By default, the dead interval is four times the default hello-interval. Information Related Commands ip ospf - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 400
dell.com | support.dell is configured. Command Modes INTERFACE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Dell Force10 recommends keeping only one key per interface. Note: The MD5 secret is stored as plain text in the configuration file with service - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 401
point-to-point to designate the interface as part of a point-to-point network. Defaults Not configured. Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip ospf priority Set the priority of the interface to determine the Designated Router for - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 402
www.dell.com | support.dell.com Parameters seconds Enter the number of seconds as the interval MXL 10/40GbE Switch IO Module Set the time interval to a number large enough to prevent unnecessary retransmissions. ip ospf transmit-delay Set the estimated time elapsed to send a link state update - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 403
OSPF process, use the no mib-binding command. Defaults none Command Modes ROUTER OSPF Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module This command is either enabled or disabled. If no OSPF process is identified as the MIB manager, the first OSPF - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 404
www.dell.com | support.dell.com mask area-id Enter a network mask in /prefix format. (/x) Enter Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Although the passive interface will neither send nor receive routing updates, the network on that interface will still - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 405
-interface interface • The previous no passive-interface interface is removed from the running configuration. • The ABR status for the router is updated. • Save passive-interface interface into the running configuration. passive-interface default • All present and future OSPF interface are marked as - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 406
www.dell.com | support.dell.com metric-type type-value route-map map-name tag tag-value (OPTIONAL) Enter the Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module To redistribute the default route (0.0.0.0/0), configure the default-information originate command. Related - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 407
Parameters process-id Enter a number for the OSPF instance. Range: 1 to 65535. Defaults Not configured. Command Modes CONFIGURATION Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 21-3. router ospf Command Example FTOS(conf)#router ospf 2 FTOS(conf - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 408
MXL 10/40GbE Switch IO Module If you delete all the network area commands for Area 0, the show ip ospf command output will not list Area 0. Example Figure 21-5. show ip ospf process-id Command Example FTOS#show ip ospf 10 Routing Process ospf 10 with ID 1.1.1.1 Virtual router default-vrf Supports - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 409
No default values or behavior Command Modes EXEC EXEC Privilege Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Use this command to isolate problems with external routes. In OSPF, external routes are calculated by adding the LSA cost to the cost of - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 410
www.dell.com | support.dell.com Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 21-7. show ip ospf process-id database Command Example FTOS>show ip ospf 1 database OSPF Router with ID (11.1.2.1) (Process ID 1) Router ( - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 411
Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 21-8. show ip ospf database asbr whether the router can support Type of Service. • DC or No DC is displayed depending on whether the originating router can support OSPF over demand circuits. - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 412
www.dell.com | support.dell.com Table 21-4. LSA. Displays the network mask implemented on the area. Displays the Type of Service (TOS) options. Option 0 is the only option. Displays the LSA metric. Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 412 | Open Shortest Path First (OSPFv2) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 413
item: • TOS-capability or No TOS-capability is displayed depending on whether the router can support Type of Service. • DC or No DC is displayed depending on whether the originating router can support OSPF over demand circuits. • E or No E is displayed on whether the originating router can accept - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 414
www.dell.com | support.dell.com Table 21-5. show ip ospf process-id database external Command Description Item Metrics about that router. Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 414 | Open Shortest Path First (OSPFv2) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 415
Options: (No TOS-capability, DC, E) LS type: Network Link State ID: 202.10.10.2 Advertising Router: 20.20.20.8 LS Seq Number: 0x80000006 Checksum: 0xa35 Length: 36 the router can support Type of Service. • DC or No DC is displayed depending on whether the originating router can support OSPF over - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 416
www.dell.com | support.dell.com show ip ospf database nssa-external Display NSSA-External (type Command History Related Commands Version 8.3.16.1 show ip ospf database Introduced on MXL 10/40GbE Switch IO Module Displays OSPF database information. show ip ospf database opaque-area Display - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 417
TOS-capability, No DC, E) LS type: Type-10 Opaque Link Area Link State ID: 1.0.0.2 Advertising Router: 10.16.1.160 LS Seq Number: 0x80000002 Checksum: 0x19c2 the router can support Type of Service. • DC or No DC is displayed depending on whether the originating router can support OSPF over demand - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 418
www.dell.com | support.dell.com show ip ospf database opaque-as Display the opaque-as (type Privilege Command History Related Commands Version 8.3.16.1 show ip ospf database Introduced on MXL 10/40GbE Switch IO Module Displays OSPF database information. show ip ospf database opaque-link Display - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 419
keywords adv-router ip-address to display only the LSA information about that router. Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Open Shortest Path First (OSPFv2) | 419 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 420
dell.com | support.dell.com Example Figure 21-12. show ip ospf process-id database router Command Example (Partial) FTOS#show ip ospf 100 database router OSPF Router with ID (1.1.1.10 can support Type of Service. • DC or No DC is displayed depending on whether the originating router can support - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 421
keywords adv-router ip-address to display only the LSA information about that router. Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Open Shortest Path First (OSPFv2) | 421 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 422
dell.com | support.dell.com Example Figure 21-13. show ip ospf process-id database summary Command Example FTOS#show ip ospf 100 database summary OSPF Router with ID (1.1.1.10 can support Type of Service. • DC or No DC is displayed depending on whether the originating router can support OSPF - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 423
information. show ip ospf interface Display the OSPF interfaces configured. If OSPF is not enabled on the switch, no output is generated. Syntax show ip ospf EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Open Shortest Path First (OSPFv2) | 423 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 424
www.dell.com | support.dell.com Example Figure 21-14. show ip ospf process-id address 192.168.1.2 Backup Designated Router (ID) 192.168.253.1, Interface address 192.168.1.1 Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 Hello due in 00:00:02 Neighbor Count is 1, Adjacent - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 425
ID is entered, command applies only to the first OSPF process. Command Modes EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 21-15. show ip ospf process-id neighbor Command Example FTOS#show ip ospf 34 neighbor Neighbor ID Pri State - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 426
www.dell.com | support.dell.com Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information This command is useful in isolating routing problems between OSPF and RTM. For example, if a route is missing from the RTM/FIB but is visible from the display output of - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 427
16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 21-17. show ip ospf process-id statistics global Command Example FTOS#show ip ospf 10 statistics global OSPF of link state request packets Number of link state update packets Number of link state acknowledgement packets The transmission - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 428
www.dell.com | support.dell.com Table 21-13. show ip ospf statistics process-id global Error Area mismatch The received hello packet has a different hello or dead interval than the configuration Buffer allocation failure A sequence no errors occurred during the database exchange process Socket Read/ - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 429
ID is entered, command applies only to the first OSPF process. Defaults none Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 21-19. show ip ospf process-id timers rate-limit Command Example FTOS#show ip ospf - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 430
www.dell.com | support.dell.com show 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information This command can be used to isolate problems with inter-area and . Range: 0 to 4294967295 Defaults Not configured. Command Modes ROUTER OSPF 430 | Open Shortest Path First (OSPFv2) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 431
Command History Usage Information Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The command area range summarizes routes for the different areas. With "not-advertise" parameter configured, this command can be used to filter out some external routes. For example, you - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 432
dell.com | support.dell History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module LSAs are sent after the start- until 100,000 msec is reached. timers throttle lsa arrival Configure the LSA acceptance intervals. Syntax timers throttle lsa arrival arrival-time - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 433
. • The Dell Force10 operating software (FTOS) supports as many monitor sessions on a system as the number of port-pipes. • The monitoring (destination, "MG") and monitored (source, "MD") ports must be on the same switch. • A monitoring port can monitor any physical port in the chassis. • Only - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 434
www.dell.com | support.dell.com description Enter a description of this monitoring session. Syntax description {description FTOS(conf-mon-sess-60) Usage The monitor command is saved in the running configuration at the Monitor Session mode level and can Information be restored after a chassis - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 435
show config Display the current monitor session configuration. Syntax show config Defaults none Command Modes MONITOR SESSION sess-11)#show config ! monitor session 11 source TenGigabitEthernet 10/0 destination TenGigabitEthernet 10/47 direction rx show monitor session Display the monitor - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 436
www.dell.com | support.dell.com show running-config monitor session Display the running configuration of all monitor sessions or a specific session. Syntax show running-config monitor session {session-ID} To display the running configuration for all monitor sessions, use just the show running- - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 437
SESSION (conf-mon-sess-session-ID) Command History Example Version 8.3.16.1 Introduced on M I/O Aggregator Figure 22-5. Configuring a Port Monitor Source Command Example FTOS(conf-mon-sess-11)#source tengig 10/0 destination tengig 10/47 direction rx FTOS(conf-mon-sess-11)# Port Monitoring | 437 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 438
438 | Port Monitoring www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 439
show arp in Chapter 15, IPv4 Routing • show vlan in Chapter 18, Layer 2 Private virtual local area networks (VLANs) extend the Dell Force10 operating software (FTOS) security suite by providing Layer 2 isolation between ports within the same private VLAN. A private VLAN partitions a traditional VLAN - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 440
dell.com | support.dell • Ports in an isolated VLAN cannot talk to each other. Servers would be mostly connected to isolated VLAN ports. • Isolated ports . • Trunk port: A trunk port, by definition, carries VLAN traffic across switches: • A trunk port in a PVLAN is always tagged. • Primary or - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 441
VLAN as an isolated VLAN, as described above. Enter primary to configure the VLAN as a primary VLAN, as described above. Defaults none Command Modes INTERFACE VLAN Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The VLAN: • Can be in only one mode - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 442
dell.com | support.dell.com Only ports (and port channels) configured as promiscuous, host, or PVLAN trunk ports (as described above) can be added to the PVLAN. No other regular ports can be added to the PVLAN. After using this command to configure .1 Introduced on MXL 10/40GbE Switch IO Module The - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 443
interface for which to display PVLAN status. Defaults none Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage This command has two types of display - a list of all PVLAN interfaces or for a specific interface. Information - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 444
www.dell.com | support.dell.com show vlan private-vlan mapping Displays the primary-secondary VLAN to display the PVLAN configuration of the designated interface. Defaults none Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 445
3/11-12 Figure 23-7. show vlan private-vlan Command Example (Interface) FTOS# show vlan private-vlan interface TenGig 2/1 Primary Secondary Type Active Ports 10 primary Yes TenGig 2/1 If the VLAN ID is that of a primary VLAN, then the entire private VLAN output will be displayed, as shown - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 446
www.dell.com | support.dell.com Table 23-2 defines the fields in the output. Table 23-2. show EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The output of this command (Figure 23-10), displays the community and isolated VLAN IDs that are - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 447
interface, as described above. Enter trunk to configure the selected port or port channel as a trunk port in a PVLAN, as described above. Defaults disabled Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The assignment of the various - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 448
448 | Private VLAN (PVLAN) www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 449
used at the command line. disable Disable PVST+ globally. Syntax disable To enable PVST+, enter no disable. Defaults Command Modes Command History PVST+ is disabled CONFIGURATION (conf-pvst) Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Per-VLAN Spanning Tree Plus (PVST+) | 449 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 450
www.dell.com | support.dell.com Related Commands protocol spanning-tree pvst Enter PVST+ mode. default command. Defaults Disabled Command Modes CONFIGURATION (The prompt is "config-pvst".) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 450 | Per-VLAN Spanning - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 451
Modes PROTOCOL PVST Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 24-1. Command Example FTOS(conf- Priority 32768, Address 001e.c9f1.00f3 We are the root of Vlan 2 Configured hello time 2, max age 20, forward delay 15 Bpdu filter disabled globally - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 452
disable command. Defaults This command has no default value or behavior. Command Modes CONFIGURATION Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 24-2. Configuring with protocol spanning-tree pvst Command FTOS#conf FTOS(conf)#protocol spanning-tree - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 453
EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example 1 Figure 24-3. show spanning-tree pvst Priority 32768, Address 001e.c9f1.00f3 We are the root of Vlan 2 Configured hello time 2, max age 20, forward delay 15 Bpdu filter disabled globally - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 454
.dell.com Example 2 Figure 24-4. show spanning-tree pvst vlan Command FTOS#show spanning-tree pvst vlan 2 VLAN 2 Root Identifier has priority 32768, Address 001e.c9f1.00f3 Root Bridge hello time 2, max age 20, forward delay 15 Bridge Identifier has priority 32768, Address 001e.c9f1.00f3 Configured - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 455
PVST interface PVST instance Port state: root-inconsistent (INCON Root), forwarding (FWD), listening (LIS), blocking (BLK), or shut down (EDS Shut) Type of STP guard configured (Root, Loop, or BPDU guard) Yes - Bpdu filter Enabled No - Bpdu filter Disabled Related Commands spanning-tree pvst - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 456
www.dell.com | support.dell.com spanning-tree pvst Configure a PVST+ interface with one of the following or port-channel interface. Defaults Not Configured Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information The BPDU guard - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 457
-1/1)#end FTOS# Related Commands show spanning-tree pvst View PVST+ configuration spanning-tree pvst err-disable Place ports in an err-disabled state History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Some non-Dell Force10 systems which have hybrid ports participating - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 458
tc-flush-standard To disable, use the no tc-flush-standard command. Defaults Disabled Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information By default FTOS implements an optimized flush mechanism for PVST+. This helps in - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 459
+ to the forwarding state. Range: 4 to 30 seconds Default: 15 seconds Defaults 15 seconds Command Modes CONFIGURATION (conf-pvst) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands vlan bridge-priority vlan hello-time vlan max-age show spanning-tree - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 460
www.dell.com | support.dell.com Related Commands vlan bridge-priority vlan forward-delay vlan Default: 20 seconds Defaults 20 seconds Command Modes CONFIGURATION (conf-pvst) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands vlan bridge-priority vlan - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 461
and rate shaping calculations. Range: 1-31 Defaults QoS rate adjustment is disabled by default, and no qos-rate-adjust is listed in the running-configuration. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Quality of Service (QoS) | 461 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 462
Syntax service-class dot1p-mapping user-priority trafficclass The user-priority value can range from 0-7 and traffic class can range from 0-6. The no form of this command is not supported. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 463
16.1 Introduced on MXL 10/40GbE Switch IO Module Note: Per Port rate police is supported for Layer 2 tagged and untagged switched traffic and for Layer 3 traffic. Per VLAN rate police is supported on only tagged ports with Layer 2 switched traffic. On one interface, you can configure the rate police - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 464
on MXL 10/40GbE Switch IO Module Related Commands rate-shape Shapes the traffic output as part of the designated policy. service-class dynamic dot1p Honor all 802.1p markings on incoming switched traffic on an interface (from INTERFACE mode) or on all interfaces (from CONFIGURATION mode - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 465
3 3 3 Command Modes INTERFACE CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information Enter this automatically configured; you cannot assign the service-class dynamic command to individual interfaces in a port channel. On the MXL Switch, - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 466
www.dell.com | support.dell.com Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information Guarantee a minimum bandwidth to different queues globally using the command service-class bandwidth-percentage from CONFIGURATION mode. The DCB ETS supersedes the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 467
the MXL Switch. FTOS enables you to match multiple class maps and specify multiple match criteria. Policy-based QoS is not supported on -input • qos-policy-output • rate-police • rate-shape • service-policy input • service-policy output • service-queue • set • show qos class-map • show qos policy - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 468
www.dell.com | support.dell.com bandwidth-percentage Assign a percentage of weight to class/ specify a Layer 2 Class Map. Default: Layer 3 Defaults Layer 3 Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 468 | Quality of Service (QoS) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 469
dot1p match mac vlan service-queue show qos class-map Configures an extended IP ACL. Configures a standard IP ACL. Configures the match criteria based Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module When you issue this command, statistical - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 470
www.dell.com | support.dell.com match ip access-group Configure match criteria for a class map, based to 63 Defaults none Command Modes CLASS-MAP CONFIGURATION (config-class-map) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information You must enter the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 471
the router. Creates a WRED profile. match ip dscp Use a differentiated services code point (DSCP) value as a match criteria. Syntax match ip dscp Command Modes CLASS-MAP CONFIGURATION (config-class-map) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage You - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 472
www.dell.com | support.dell.com Parameters MXL 10/40GbE Switch IO Module You must enter the class-map command in order to access this command. After the class map is identified, you can configure the match criteria. Related Commands class-map Identifies the class map. 472 | Quality of Service - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 473
CLASS-MAP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage You must enter the class-map command in order to access this command. After the class map is Information identified, you can configure the match criteria. Related Commands class-map Identifies the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 474
| support.dell.com Parameters qos-policy-name Enter the name of the policy map in character format (32 characters maximum) Defaults none Command Modes CONFIGURATION (policy-map-input and policy-map-output) Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 475
8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Output policy map is used to assign traffic to different flows using QoS policy. This command enables the policy-map-output configuration mode (conf-policy-map-out). Related Commands service-queue policy-aggregate service-policy output Assigns - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 476
on MXL 10/40GbE Switch IO Module Use this command to specify the name of the output QoS policy. After output policy is specified, rate-limit, bandwidth-percentage, and WRED can be defined. This command enables the qos-policy-output configuration mode-(conf-qos-policy-out). When changing a service - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 477
is used. Command Modes QOS-POLICY-OUT Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module When rate-shape in QoS policy is applied both on queue level and aggregate of the selected interface. Creates a QoS output policy. Quality of Service (QoS) | 477 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 478
3 Defaults Layer 3 Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage A single policy-map can be attached to one or more interfaces to specify the service-policy for those Information interfaces. A policy map attached to an interface can - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 479
map-output context. Defaults none Command Modes CONFIGURATION (conf-policy-map-in and conf-policy-map-out) Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module There are four (4) queues per interface on the MXL Switch. This command assigns a class map or - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 480
dot1p value. Range: 0 to 7 On the MXL Switch, allowed values are:0,2,4,6 Defaults none Command Modes CONFIGURATION (conf-qos-policy-in) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage After the IP DSCP bit is set, other QoS services can then operate on the bit - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 481
none Command Modes EXEC EXEC Privilege Command History Example 1 Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 25-2. show qos policy-map detail (IPv4) Command Example FTOS TenGig 4/2 FTOS# policy-map-input PM1 PM2 policy-map-output - PMOut Quality of Service (QoS) | 481 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 482
www.dell.com | support.dell.com show qos policy-map-input View the input QoS policy map details. Syntax show qos policy- QoS policy name. Defaults none Command Modes Command History EXEC EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 482 | Quality of Service (QoS) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 483
Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 25-6. show qos qos-policy-input Command Example FTOS# Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Quality of Service (QoS) | 483 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 484
Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example 1 Figure 25-8. show qos statistics Command Example FTOS#show qos statistics Interface Te 0/20 Queue# Matched Pkts 0 0 1 0 2 0 3 0 FTOS# 484 | Quality of Service (QoS) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 485
The number of packets that matched the class-map criteria. Note: When trust is configured, matched packet counters are not incremented in this field. Example 2 Figure 25-9. show Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Quality of Service (QoS) | 485 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 486
dell.com | support.dell.com Example Figure 25-10 Input Policy Map configuration for the CAM usage. Syntax test cam-usage service-policy input MXL 10/40GbE Switch IO Module Figure 25-11. test cam-usage service-policy input policy-map stack-unit all Command Example FTOS# test cam-usage service - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 487
packets according to their DSCP value as a secondary option in case no match occurs against the configured class maps. Defaults none Command Modes CONFIGURATION (conf-policy-map-in) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Quality of Service (QoS) | 487 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 488
www.dell.com | support.dell.com Usage When trust is configured, matched bytes/packets counters are not incremented in . Defaults none Command Modes CONFIGURATION (conf-qos-policy-out) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 488 | Quality of Service (QoS) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 489
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Use the default pre-defined profiles or configure your own profile. You can not delete the pre-defined profiles or their default values. This command enables the WRED configuration mode-(conf-wred). Quality of Service (QoS) | 489 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 490
490 | Quality of Service (QoS) www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 491
protocol. The Dell Force10 operating software (FTOS) supports both RIP version 1 (RIPv1) and RIP version 2 (RIPv2). The FTOS implementation of RIP is based on IETF RFCs 2453 and RFC 1058. For more information about configuring RIP, refer to the FTOS Configuration Guide. Commands The following - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 492
www.dell.com | support.dell.com • show running-config rip • timers basic • version auto- Introduced on MXL 10/40GbE Switch IO Module Usage This command triggers updates of the main RIP routing tables. Information debug ip rip Examine RIP routing information for troubleshooting. Syntax debug - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 493
. Range: 1 to 16 Default: 1 (OPTIONAL) Enter the keyword route-map followed by the name of a configured route-map. Defaults Disabled metric: 1 Command Modes ROUTER RIP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The default route must be present in the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 494
www.dell.com | support.dell.com default-metric Change the default metric for routes. is 1. Default 1 Command Modes ROUTER RIP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage This command ensures that route information being redistributed is converted to the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 495
Related Commands Version 8.3.16.1 default-metric Introduced on MXL 10/40GbE Switch IO Module Assigns one distance metric to all routes learned using the redistribute command. distribute-list in Configure a filter for incoming routing updates. Syntax distribute-list prefix-list-name in [interface - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 496
ospf to filter all OSPF routes. (OPTIONAL) Enter the keyword static to filter manually configured routes. Defaults Not configured. Command Modes Command History ROUTER RIP Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands ip prefix-list Enters PREFIX-LIST mode and - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 497
ip split-horizon Sets the RIP routing updates to exclude routing prefixes. ip rip receive Defaults RIPv1 and RIPv2 Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information If you want the interface to receive both versions of - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 498
Introduced on MXL 10/40GbE Switch IO Module Related Commands ip poison-reverse Sets the prefix for RIP routing updates. maximum-paths RIP Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module RIP supports a maximum of 16 ECMP paths. neighbor Define a - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 499
address in dotted decimal format. You cannot specify a subnet. Defaults No RIP network is configured. Command Modes ROUTER RIP Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module You can enable an unlimited number of RIP networks. RIP operates over - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 500
www.dell.com | support.dell.com Parameters prefix-list-name offset interface Enter the by a number from 1 to 4094. Defaults Not configured. Command Modes ROUTER RIP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information When the offset metric is - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 501
by a number from 1 to 4094. Defaults Not configured. Command Modes ROUTER RIP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information Although the passive interface neither sends nor receives routing updates, the network on that interface is still included - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 502
www.dell.com | support.dell.com Related Commands default-information originate Generates a no router rip command. Defaults Disabled. Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module To enable RIP, you must assign - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 503
mode. show config Display the changes you made to the RIP configuration. Default values are not shown. Syntax show config Command Modes ROUTER RIP Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 26-2. show config Command Example in ROUTER RIP - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 504
dell.com | support.dell Use this feature to display the current RIP configuration. Syntax show running-config rip Defaults none 10.0.0.0 passive-interface TenGigabitEthernet 2/0 neighbor 20.20.20.20 redistribute ospf 999 version 2 Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 505
Range: zero (0) to 4294967295. Default is 240 seconds. Defaults • update = 30 seconds • invalid = 180 seconds • holddown = 180 seconds • flush = 240 seconds. Command Modes ROUTER RIP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage If you change the timers on - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 506
www.dell.com | support.dell.com Default The FTOS sends RIPv1 and receives RIPv1 and RIPv2. Command Modes ROUTER RIP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands ip rip receive version ip rip send version Sets the RIP version to be received on - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 507
Dell Force10 operating software (FTOS) remote monitoring (RMON) is based on IEEE standards, providing both 32-bit and 64-bit monitoring and long-term statistics collection. FTOS RMON supports protocol (SNMP) GET/GETNEXT access is supported. Configure RMON using the RMON commands. Collected data - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 508
www.dell.com | support.dell.com • show rmon history • show rmon log • show rmon statistics rmon alarm object in the alarmTable of the RMON MIB. Default owner Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 508 | Remote Monitoring (RMON) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 509
. Range: 5 to 3600 seconds Default: 1800 seconds Defaults No default behavior Command Modes CONFIGURATION INTERFACE (config-if) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module rmon collection statistics Enable RMON MIB statistics collection on an interface. Syntax - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 510
www.dell.com | support.dell.com rmon event Add an event in the RMON event table. Syntax rmon the owner of this event. Defaults as described above Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module rmon hc-alarm Set an alarm on any MIB - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 511
alarm. This is the alarmOwner object in the alarmTable of the RMON MIB. Defaults owner Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show rmon Display the RMON running status including the memory usage. Syntax show rmon Defaults none - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 512
dell.com Parameters index brief (OPTIONAL) Enter the table index number to display just that entry. (OPTIONAL) Enter the keyword brief to display the RMON Alarm Table in an easy-to-read format. Defaults none Command Modes EXEC Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 513
display the RMON Event Table in an easy-to-read format. Defaults none Command Modes EXEC Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example 1 Figure 27-4. show rmon event index Command Example FTOS#show rmon event 1 RMON event entry 1 description: 1 event type - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 514
www.dell.com | support.dell.com show rmon hc-alarm Display the contents of RMON High- -to-read format. Defaults none Command Modes EXEC Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example 1 Figure 27-6. show rmon hc-alarm brief Command Example FTOS#show - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 515
the RMON Log Table in an easy-to-read format. Defaults none Command Modes EXEC Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example 1 Figure 27-10. show rmon log index Command Example FTOS#show rmon log 2 RMON log entry, alarm table index 2, log index 1 log time - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 516
www.dell.com | support.dell.com Example 2 Figure 27-11. show rmon log brief Command Example FTOS#show rmon log br eventIndex description format. Defaults none Command Modes EXEC Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 516 | Remote Monitoring (RMON) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 517
Example 1 Figure 27-12. show rmon statistics index Command Example FTOS#show rmon statistics 6001 RMON statistics entry 6001 interface: ifIndex.100974631 TenGigabitEthernet 2/1 packets dropped: 0 bytes received: 0 packets received: 0 broadcast packets: 0 multicast packets: 0 CRC error: 0 under-size - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 518
518 | Remote Monitoring (RMON) www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 519
28 Rapid Spanning Tree Protocol (RSTP) Overview The Dell Force10 operating software (FTOS) implementation of the rapid spanning tree protocol (RSTP) is based on the IEEE 802.1w standard spanning-tree protocol. The RSTP algorithm configures connectivity throughout a bridged local area network (LAN) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 520
www.dell.com | support.dell.com Command Modes Command History Related Commands CONFIGURATION RSTP (conf-rstp) Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module protocol spanning-tree rstp Enters rapid spanning tree mode debug spanning-tree rstp Enable debugging of RSTP and view - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 521
spanning tree protocol, use the no disable command. Defaults RSTP is disabled Command Modes CONFIGURATION RSTP (conf-rstp) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands protocol spanning-tree rstp Enters Rapid Spanning Tree mode forward-delay - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 522
dell.com | support.dell.com Related Commands hello-time max-age Changes the time interval between BPDUs. Changes the wait time before RSTP refreshes protocol configuration Command Modes CONFIGURATION RSTP (conf-rstp) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 523
-tree rstp To exit the RSTP mode, use the exit command. Defaults Not configured Command Modes CONFIGURATION RSTP (conf-rstp) Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 28-2. protocol spanning-tree rstp Command Example FTOS(conf)#protocol spanning - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 524
www.dell.com | support.dell.com show config View the current configuration for the mode. Only non-default values are displayed. Syntax Command Modes show config CONFIGURATION RSTP (conf-rstp) Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 28-3. show - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 525
Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example 1 Figure 28-4. show 4, max age 20, forward delay 15 Bridge ID Priority 16384, Address 0001.e801.6aa8 Configured hello time 2, max age 20, forward delay 15 Bpdu filter disabled globally Interface Designated - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 526
www.dell.com | support.dell.com Example 2 Figure 28-5. show spanning-tree rstp with 2, max age 20, forward delay 15, max hops 0 Bridge Identifier has priority 32768, Address 0001.e801.6aa8 Configured hello time 2, max age 20, forward delay 15, max hops 0 We are the root Current root has priority - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 527
Loop guard is not supported in the show spanning-tree rstp guard command. spanning-tree rstp Configure an RSTP interface with port-channel interface. Defaults Not configured Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Rapid Spanning Tree - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 528
dell.com | support.dell.com Usage Information The BPDU guard option prevents the port from participating in an active STP topology in case a BPDU appears on a port unintentionally, or is mis-configured Command History CONFIGURATION Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 528 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 529
Usage Information By default FTOS implements an optimized flush mechanism for RSTP. This helps in flushing MAC addresses only when necessary (and less often), allowing for faster convergence during topology changes. However, if a standards-based flush mechanism is needed, you can turn on this knob - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 530
www.dell.com | support.dell.com 530 | Rapid Spanning Tree Protocol (RSTP) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 531
in the Dell Force10 operating software (FTOS), in the following sections: • AAA Accounting Commands • Authorization and Privilege Commands • Authentication and Password Commands • RADIUS Commands • TACACS+ Commands • SSH Server and SCP Commands • Secure DHCP Commands For configuration details, refer - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 532
server acknowledges the start notice before granting the user's process request. Enter the keyword stop-only to instruct the TACACS+ security server supports TACACS+ accounting. Defaults Command Modes Command History Example none CONFIGURATION Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 533
accounting suppress null-username command Defaults Accounting records are recorded for all users. Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module FTOS issues accounting records for all users on the system, including users - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 534
www.dell.com | support.dell.com Command Modes Command History Example EXEC Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 29-2. show accounting Command Example FTOS#show accounting Active accounted actions on tty2, User admin Priv 1 Task ID 1, EXEC Accounting record, 00: - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 535
+ protocol to perform authorization. Enter this keyword to apply no authorization. Defaults none Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module aaa authorization config-commands Set parameters that restrict (or permit) a user's access to - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 536
www.dell.com | support.dell.com aaa authorization exec Set parameters that restrict (or permit) a user's access . Defaults Command Modes none CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module privilege level (CONFIGURATION mode) Change the access - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 537
Modes Command History LINE Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Authentication and Password Commands This section contains • password-attributes • privilege level (CONFIGURATION mode) • privilege level (LINE mode) • service password-encryption • show privilege • show - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 538
+ server(s) configured with the tacacs-server host command. (OPTIONAL) In the event of a "no response" from the first method, FTOS applies the next configured method. Defaults Use the enable password. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 539
method, FTOS applies the next configured method (up to four configured methods). Default Not configured (that is, no authentication is performed) Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module By default, the locally - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 540
access-list-name Enter the name of an established IP Standard ACL. Defaults Not configured. Command Modes LINE Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module line ip access-list standard ip access-list extended Applies an authentication method - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 541
-config file of another Dell Force10 router. Enter a text string, up to 32 characters long, as the clear text password. Command Modes Not configured. Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Only Dell Force10 Technical Support staff use this - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 542
-config file of another Dell Force10 router. Enter a text string, up to 32 characters long, as the clear text password. Defaults No password is configured. level = 15 Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Use - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 543
on MXL 10/40GbE Switch IO Module FTOS prompts users for these passwords when the method for authentication or authorization used is "line". Related Commands enable password login authentication service password-encryption Sets the password for the enable command. Configures an authentication - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 544
special-char followed the number of special characters permitted. Range: 0 - 31 Defaults Command Modes none CONFIGURATION Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module password Specifies a password for users on terminal lines. 544 | Security - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 545
password-encryption To store new passwords as clear text, use the no service password-encryption command. Defaults Enabled. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Caution: Encrypting passwords with this command does not provide - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 546
support.dell.com show users View information on all users logged into the switch. Syntax show users [all] Parameters all (OPTIONAL) Enter the keyword all to view all terminal lines in the switch. Command Modes EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 547
type for the password option is 0. The default encryption type for the secret option is 0. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage To view the defined user names, use the show running-config user command. Information - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 548
-server timeout debug radius View RADIUS transactions to assist with troubleshooting. Syntax debug radius To disable debugging of RADIUS, use the no debug radius command. Defaults Disabled. Command Modes Command History EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 549
0 to 2147483647 seconds. Default: 0 seconds. Defaults 0 seconds Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module radius-server host Configure a RADIUS server host. Syntax radius-server host {hostname | ipv4-address} [auth-port port-number - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 550
www.dell.com | support.dell.com auth-port port-number configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Use this command to configure any number of RADIUS server hosts for each server host that is Information configured - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 551
Not configured. CONFIGURATION Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The key configured on the switch must match the key configured on the RADIUS server daemon. If the key parameter in the radius-server host command is configured, the key configured with the radius-server key - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 552
1000 seconds. Default: 5 seconds. Defaults 5 seconds Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands radius-server host Configures a RADIUS host. TACACS+ Commands FTOS supports TACACS+ as an alternate method for login - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 553
followed by a number from 1 to 4094. Defaults Not configured. Command Mode CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module tacacs-server host Specify a TACACS+ host. Syntax tacacs-server host {hostname | ipv4-address} [port number] [timeout seconds - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 554
16.1 Introduced on MXL 10/40GbE Switch IO Module Usage To list multiple TACACS+ servers to be used by the aaa authentication login command, configure this Information command multiple times. If you are not configuring the switch as a TACACS+ server, you do not need to configure the port, timeout - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 555
SSH Server and SCP Commands FTOS supports secure shell (SSH) protocol versions 1.5 and 2.0. SSH is a protocol for secure remote 1024 to 2048 Default: 1024 Defaults Key size 1024 Command Modes Command History CONFIGURATION Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Security | 555 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 556
www.dell.com | support.dell.com Example Figure 29-5. crypto key generate rsa1 Command server to enable collecting debug information on the server. Defaults Disabled on both client and server. Command Modes EXEC Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 557
Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module To configure the switch as a SCP server, use the ip ssh server command. Related Commands ip ssh server Enables the SSH and SCP server on the switch. ip ssh authentication-retries Configure the maximum number of attempts - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 558
www.dell.com | support.dell.com Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip ssh hostbased-authentication Enable hostbased-authentication for the SSHv2 server. Syntax ip ssh hostbased-authentication enable To disable hostbased-authentication for SSHv2 server, - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 559
enable Enter the keyword enable to enable password-authentication for the SSH server. Defaults Enabled Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage With password authentication enabled, you can authenticate using local - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 560
{WORD} Parameters WORD Enter the rhost file name for the host-based authentication. Defaults none Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 29-7. ip ssh rhostsfile Command Example FTOS#conf FTOS(conf)# ip ssh - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 561
enable to enable RSA authentication for the SSHv2 server. Defaults RSA authentication is disabled by default. Command Modes Command History Usage Information Related Commands CONFIGURATION Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Enabling RSA authentication allows you to - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 562
only SSHv1 or SSHv2. Defaults Default listening port is 22. Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module This command enables the SSH server and begins listening on a port. If a port is not specified, listening is - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 563
Introduced on MXL 10/40GbE Switch IO Module server SSH server version Password Authentication Hostbased Authentication RSA Authentication FTOS# : disabled. : v1 and v2. : enabled. : disabled. : disabled. Related Commands ip ssh server show ip ssh client-pub-keys Configures an SSH server - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 564
dell.com | support.dell.com show ip ssh client-pub-keys Display the client public keys used in host-based authentication. Syntax Defaults show ip ssh client-pub-keys none Command Modes Command History Example EXEC Version 8.3.16.1 Introduced on MXL 10/40GbE Switch -key-file Configures the file - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 565
ip ssh rsa-authentication (Config) Configures the RSA authorized keys. ssh Open FTOS supports both inbound and outbound SSH sessions using IPv4 addressing. Inbound SSH supports Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 29-13. ssh Command Example - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 566
www.dell.com | support.dell.com Secure DHCP Commands The dynamic host configuration protocol ( Configure the system to trust Option 82 when it is received from the previous-hop router. Command Modes CONFIGURATION Default Command History Disabled Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 567
5 to 21600 Command Modes CONFIGURATION Default Command History none Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip dhcp snooping the keyword mac followed by the MAC address of the host to which the server is leasing the IP address. Enter the keyword vlan-id followed by the VLAN - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 568
www.dell.com | support.dell.com interface type slot/port lease time Enter the keyword interface followed by Privilege Default Command History none Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip dhcp snooping trust Configure an interface as trusted. Syntax [no] ip dhcp snooping - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 569
name Enter the name of a VLAN on which to enable DHCP Snooping. Command Modes Default CONFIGURATION Disabled Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module When enabled, the system begins creating entries in the binding table for the specified - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 570
570 | Security www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 571
30 sFlow Overview The Dell Force10 operating software (FTOS) sFlow monitoring system includes an sFlow the sFlow datagram. • The 802.1P source priority field is not filled up in the extended switch element in the sFlow datagram. • Only Destination and Destination Peer AS numbers are packed in the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 572
dell.com | support.dell.com Commands The sFlow commands are: • sflow collector • sflow enable (Global) • sflow enable (Interface) • sflow extended-switch configured Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage You can configure - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 573
, use the no sflow enable command. Defaults sFlow is disabled by default Command Modes Command History Usage Information CONFIGURATION Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module In addition to this command, sFlow needs to be enabled on individual interfaces where you want sFlow - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 574
in seconds. Range: 15 to 86400 seconds Default: 20 seconds Defaults 20 seconds Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The polling interval for an interface is the maximum number of seconds between successive - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 575
in powers of 2 only, for example 4096, 8192, 16384 etc. Default: 32768 packets Defaults Command Modes 32768 CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Sample-rate is the average number of packets skipped before the sample is taken - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 576
www.dell.com | support.dell.com Related Commands sflow sample-rate (Interface) Changes packets Defaults The global default sampling Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information This command changes the sampling - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 577
8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 30-1. show sflow Command Example FTOS##show sflow sFlow services are disabled Global default sampling rate: 32768 Global default counter polling interval: 20 Global extended information enabled: none 0 collectors configured 0 UDP packets - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 578
578 | sFlow www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 579
the Dell Force10 operating software (FTOS) are: • show snmp • show snmp engineID • show snmp group • show snmp user • snmp ifmib ifalias long • snmp-server community • snmp-server contact • snmp-server enable traps • snmp-server engineID • snmp-server group • snmp-server host • snmp-server location - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 580
that group. • SNMP operations are not supported on a virtual LAN (VLAN). show snmp Display the status of SNMP network elements. Syntax show snmp Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 31-1. show snmp Command - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 581
Configures local and remote SNMP engines on the router. show snmp group Display the group name, security model, status, and storage type of each group. Syntax show snmp group Command Modes EXEC EXEC Privilege Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 582
.dell.com | support.dell.com Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module command run on Dell Force10 switch FTOS#snmp ifmib ifalias long !------command run on server connected to switch snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 583
History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Figure 31-6 configures a community named guest that is mapped to the security named guestuser Information with Read Only (ro) permissions. Example Figure 31-6. snmp-server community Command Example FTOS#config FTOS - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 584
string, up to 55 characters long. Defaults none Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module snmp-server enable traps Enable SNMP traps. Syntax snmp-server enable traps [notification-type] [notification-option] To disable traps, use - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 585
MXL 10/40GbE Switch IO Module Usage Information FTOS supports up to 16 SNMP trap receivers. If you do not configure this command, no traps controlled by this command are sent. If you do not specify a notification-type and notification-option, all traps are enabled. Related Commands snmp-server - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 586
dell.com | support.dell Defaults As above Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information Changing engines that are configured on the router. Displays the SNMP running configuration. snmp-server group Configure a new SNMP - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 587
CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 31-8 shows the group named harig as a version 3 user requiring both authentication and encryption and read access limited to the read named rview. Example Figure 31-8. snmp-server - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 588
www.dell.com | support.dell.com Related Commands show snmp group show running-config snmp Displays the group name, security model, view status, and storage type of each group. Displays the SNMP running configuration. snmp-server host Configure the recipient of an SNMP trap operation. Syntax - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 589
sent to host. Defaults As shown Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information In order to configure the router to send SNMP notifications, you must enter at least one snmp-server host command. If you enter the command - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 590
. Parameters text Enter an alpha-numeric text string, up to 55 characters long. Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module snmp-server packetsize Set the largest SNMP packet size permitted when the SNMP - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 591
assigned to the management interface is the default. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage For this snmp-server trap-source command to be enabled, you must configure an IP address on the Information interface and enable the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 592
www.dell.com | support.dell.com udp-port port-number above Command Modes CONFIGURATION Command History Usage Information Examples Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module No Figure 31-9. snmp-server user Command Example (Encrypted) FTOS# snmp-server user privuser v3group v3 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 593
on MXL 10/40GbE Switch IO Module Usage The oid-tree variable is a full sub-tree starting from 1.3.6 and can not specify the name of a sub-tree or Information a MIB. Figure 31-12 configures a view named rview that allows access to all objects under 1.3.6.1. Example Figure 31-12. snmp-server view - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 594
8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage If the interface is expected to flap during normal usage, you can disable this command. Information Syslog Commands The following commands allow you to configure logging functions on all Dell Force10 switches: • clear logging • default - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 595
to the console. Syntax default logging console Defaults level = 7 or debugging Command Modes CONFIGURATION Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module logging console Sets the logging console parameters. Simple Network Management Protocol - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 596
www.dell.com | support.dell.com default logging monitor Return to the default settings for messages logged to the terminal. Syntax default logging monitor Defaults level = 7 or debugging Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 597
logging buffer, console, Syslog server, and terminal lines. Enables logging to the Syslog server based on severity. logging buffered size = 40960 bytes Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module When you decrease the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 598
dell.com | support.dell.com Defaults 7 or debugging Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch internal buffer. logging facility Configure the Syslog facility, used for error messages sent to Syslog servers. Syntax logging facility [facility - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 599
, informational, or debugging. The default is 4. Defaults 4 or warnings Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage When you configure the snmp-server trap-source command, the system messages logged to the history Information - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 600
www.dell.com | support.dell.com Usage When the number of messages reaches the limit logging buffer, Syslog server and terminal lines, use the no logging on command. Defaults Enabled Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 601
the source IP address of Syslog packets sent to the Syslog server. Syntax logging source-interface interface To disable this command and to 4094. Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 602
.dell.com | support.dell logging. logging trap Specify which messages are logged to the Syslog server based the message severity. Syntax logging trap [level] To . Command Modes CONFIGURATION Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module logging - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 603
16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 10.10.10.4 Logging to 10.1.2.4 Logging to 172.31.1.4 Logging to 133.33.33.4 May 22 10:21:10: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10.11.68.22 )by admin May 22 10:16:35: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 604
www.dell.com | support.dell.com Figure 31-14. show logging history Command MXL 10/40GbE Switch IO Module This command displays internal software driver information, which may be useful during troubleshooting switch initialization errors, such as a downed Port-Pipe. terminal monitor Configure - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 605
32 Storm Control Overview The Dell Force10 operating software (FTOS) storm supports storm control configuration on ingress. • An INTERFACE-level command overrides any CONFIGURATION-level ingress command for that physical interface, if both are configured. • Do not apply per-VLAN quality of service - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 606
Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 32-1. show storm-control broadcast Command Example FTOS#show storm-control broadcast tengigabitethernet 3/24 Broadcast storm control configuration Interface Direction Packets/Second TenGig 3/24 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 607
Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 32-3. show storm-control unknown-unicast Command Example FTOS#show storm-control unknown-unicast tengigabitethernet 3/0 Unknown-unicast storm control configuration Interface Direction Packets/Second TenGig - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 608
www.dell.com | support.dell.com Parameters packets_per_second Enter the packets per second of broadcast traffic allowed from the network. Range: 0 to 33554368. Defaults none Command Modes CONFIGURATION (conf) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 609
slot/port) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module storm-control unknown-unicast (Configuration) Configure the packets per second of unknown-unicast traffic allowed on a MXL Switch (ingress rate only). Syntax storm-control unknown-unicast [packets_per_second - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 610
www.dell.com | support.dell.com storm-control unknown-unicast (Interface) Configure the packets per second of unknown-unicast traffic allowed on a MXL Switch interface (ingress if-interface-slot/port) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 610 | Storm Control - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 611
more information about using the MXL 10/40GbE Switch stacking feature, refer to the "Stacking MXL 10/40GbE Switches" chapter in the FTOS Configuration Guide. Commands The commands described in this chapter are used for managing the stacking of MXL 10/40GbE switch systems. The stacking commands are - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 612
dell.com | support.dell.com Usage When the command is given as redundancy disable-auto-reboot stack-unit, it prevents the MXL 10/ Information 40GbE switch problem state. Default Command Modes Command History Usage Information none EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 613
. show redundancy Display the current redundancy configuration (status of automatic reboot configuration on stack management unit). Syntax show redundancy Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Stacking Commands | 613 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 614
www.dell.com | support.dell.com Example Down Peer Stack-unit: not present -- Stack-unit Redundancy Configuration -- Primary Stack-unit: mgmt-id 0 Auto Data Sync information about the stacking ports on all switches in the MXL 10/40GbE switch stack. Syntax show system stack-ports [ - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 615
Example Figure 33-3. show system stack-ports Command Example FTOS# show system stack-ports Topology: Ring Interface Connection Link Speed Admin (Gb/s) Status Link Status Trunk Group 0/33 1/37 40 0/37 2/33 40 0/41 1/49 40 0/45 2/53 40 1/33 2/37 40 1/37 0/33 40 1/49 0/41 40 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 616
www.dell.com | support.dell.com Example Figure 33-4. show system stack-ports status Command Example FTOS# show system stack-ports status Topology: Ring Interface Link Speed Admin (Gb/s) Status - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 617
management unit. show system stack-unit stack-group Display the stack-groups present/configured for a MXL 10/40GbE switch stack unit. Syntax Parameters show system stack-unit stack-group [configured] unit number Number of the member stack unit. Valid values: 0 to 5. Default - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 618
| support.dell.com Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module reload show system show system stack-unit stack-group Reboots FTOS. Displays the current status of all stack members or a specific member. Display the stack-groups present/configured - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 619
unit identifier number. Defaults none Command Modes EXEC Privilege Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module You can renumber any switch, including the management unit or a stand-alone unit. You cannot renumber a unit to a number of an active - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 620
620 | Stacking Commands www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 621
Tree Protocol (STP) Overview The commands described in this chapter configure and monitor the IEEE 802.1d spanning tree protocol (STP). -tree 0 • spanning-tree 0 bridge-priority Set the bridge priority of the switch in an IEEE 802.1D Spanning Tree. Syntax bridge-priority {priority-value | - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 622
www.dell.com | support.dell.com Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module debug spanning-tree EXEC Privilege Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module When you enable debug spanning-tree bpdu for multiple - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 623
15 seconds Command Modes SPANNING TREE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands max-age hello-time Changes the wait time before STP refreshes protocol configuration information. Changes the time interval between BPDUs. hello-time Set the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 624
www.dell.com | support.dell.com Parameters seconds Enter a number as the time interval between transmission of BPDUs. Range: 1 to 10. Default: 2 seconds. Defaults 2 seconds Command Modes SPANNING TREE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 625
stp-id command. Parameters stp-id Enter zero (0). FTOS supports one Spanning Tree group, group 0. Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 34-1. protocol spanning-tree Command Example - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 626
www.dell.com | support.dell.com show spanning-tree 0 Display the spanning tree group configuration and status of interfaces in the spanning tree group. Syntax show spanning- Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 626 | Spanning Tree Protocol (STP) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 627
-tree 0 Command Example FTOS#show spanning-tree 0 Executing IEEE compatible Spanning Tree Protocol Bridge Identifier has priority 32768, Address 0001.e800.0a56 Configured hello time 2, max age 20, forward delay 15 Bpdu filter disabled globally We are the root of the spanning tree Current root has - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 628
www.dell.com | support.dell.com Table 34-1. show spanning-tree 0 Command Description Field "Times" "Port 2, max age 20, forward delay 15 Bridge ID Priority 32768, Address 0001.e800.0a56 Configured hello time 2, max age 20, forward delay 15 Bpdu filter disabled globally Interface Designated - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 629
- No spanning-tree 0 Assigns a Layer 2 interface to STP instance 0 and configures a port cost or port priority, or enables loop guard, root guard, or Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information If you enable portfast bpduguard - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 630
), Multiple Spanning Tree Protocol (MSTP), and Per-VLAN Spanning Tree Plus (PVST+). Root guard is supported on any STP-enabled port or port-channel except when used as a stacking port. When enabled on a port, root guard applies to all VLANs configured on the port. 630 | Spanning Tree Protocol (STP) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 631
Dell Force10 operating software (FTOS), the hardware, or using the network time protocol (NTP). With NTP, the switch can act only as a client to an NTP clock host. For more information, refer to the "Network Time Protocol" section of the Management chapter in the FTOS Configuration Guide. Commands - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 632
dell.com | support.dell.com calendar set Set the time and date for the switch EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 35-1. calendar set updates the software clock after system bootup.You cannot delete the hardware clock (calendar). To manually update - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 633
Not configured Command Modes EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch switch reboots. Dell Force10 recommends using an outside time source, such as NTP, to ensure accurate time on the switch. Related Commands ntp update-calendar Sets the switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 634
www.dell.com | support.dell.com clock summer-time date Set a date (and time zone) on which to convert the switch to daylight saving 60 minutes Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 635
to add during the summer-time period. Range: 1 to 1440. Default: 60 minutes. Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands calendar set clock summer-time date show clock Sets the hardware - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 636
with a UTC offset of -8. clock update-calendar Set the switch hardware clock based on the software clock. Syntax clock update-calendar Defaults Not configured. Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Use this command only - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 637
debug ntp Display NTP transactions and protocol messages for troubleshooting. Syntax debug ntp {adjust | all | authentication | events | loopfilter | Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module You also must configure an - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 638
www.dell.com | support.dell.com ntp authentication-key Specify a key for authenticating the NTP server. Syntax ntp authentication-key number md5 [0 Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module After configuring the ntp - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 639
if the interface address is IPv4. Defaults Not configured. Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ntp server Configure an NTP time-serving host. Syntax ntp server {hostname | ipv4-address} [key keyid] [prefer] [version number - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 640
www.dell.com | support.dell.com Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information You can configure multiple time serving hosts (up to 250). From these time serving hosts, the FTOS chooses one NTP host with which to - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 641
(OPTIONAL) Enter the number of minutes between updates from NTP to the hardware clock. Range: 1 to 1440. Default: 60 minutes. Defaults Not enabled. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show calendar Display the current date - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 642
dell.com | support.dell.com Example Figure 35-3. show calendar Command Example FTOS#show calendar 12:29:34 pacific Tue May 22 2012 FTOS# Related Commands show clock Displays the time and date from the switch Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 35-4. show - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 643
MXL 10/40GbE Switch IO Module Figure 35-6. show ntp associations Command Example FTOS#show ntp associations remote ref clock st when poll reach delay offset disp 10.10 candidate for selection • ~ means the peer is statically configured Displays the remote IP address of the NTP peer. - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 644
www.dell.com | support.dell.com Example Figure 35-7. show ntp status Command Example path dispersion. State what NTP mode the switch is. This should be client mode. Related Commands show ntp associations Displays information on the NTP Master and Peer configurations. 644 | System Time and Date - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 645
uplink-state-group • show uplink-state-group • uplink-state-group • upstream clear ufd-disable Re-enable one or more downstream interfaces on the switch/router that are in a UFD-disabled error state so that an interface can send and receive traffic. Syntax clear ufd-disable {interface interface - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 646
dell.com | support.dell.com Parameters interface interface uplink-state-group group-id Specifies one or more downstream interfaces. For interface, enter one of the following interface types: 10 Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module downstream upstream uplink-state - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 647
length: 80 alphanumeric characters. Defaults none Command Modes UPLINK-STATE-GROUP Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module uplink-state-group Creates an uplink-state group and enable the tracking of upstream links. Example Figure 36 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 648
dell.com | support.dell.com Usage Information You can assign physical port or port-channel interfaces to an uplink-state group. You can assign an interface to only one uplink-state group. You must configure Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands downstream - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 649
Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands uplink-state-group Creates an uplink-state group and enable the tracking of upstream links. show running-config uplink-state-group Display the current configuration of one or more uplink-state groups - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 650
www.dell.com | support.dell.com Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 36-2. show running-config uplink-state-group Command Example FTOS#show running-config uplink-state-group ! uplink-state-group 3 no enable description - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 651
show running-config uplink-state-group uplink-state-group Displays the current configuration of one or more uplink-state groups. Creates an uplink-state an uplink-state group and enable the tracking of upstream links on a switch/router. Syntax uplink-state-group group-id To delete an uplink-state - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 652
www.dell.com | support.dell.com Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage After you enter the command, you enter Uplink-State-Group Configuration mode to assign upstream Information and downstream interfaces to the group. An uplink-state group is - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 653
an uplink-state group and enable the tracking of upstream links. Example Figure 36-5. upstream Command Example FTOS(conf-uplink-state-group-16)# upstream tengigabitethernet 1/10-15 FTOS(conf-uplink-state-group-16)# Uplink Failure Detection (UFD) | 653 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 654
www.dell.com | support.dell.com 654 | Uplink Failure Detection (UFD) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 655
stackable VLANs and QinQ), you can "stack" VLANs into one tunnel and switch them through the network transparently. The VLAN stacking commands described in this chapter . IP addresses on a stackable VLAN-enabled VLAN is not supported if the VLAN contains stackable VLAN access ports. This facility - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 656
indicator (DEI) value. Syntax Defaults dei enable Packets are colored green; no packets are dropped. Command Mode CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module dei honor Honor the incoming DEI value by mapping it to an FTOS drop precedence. You can - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 657
on egress are marked with DEI 0. Command Mode INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage You must first enable DEI for this configuration to take effect. Information Related Commands dei enable Enables DEI. member Assign a Stackable VLAN - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 658
the dei honor configuration. Syntax show interface dei-honor [interface slot/port] Parameters interface slot/port Enter the interface type followed by the slot and port number. Command Mode EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 659
-stack access To remove access port designation, use the no vlan-stack access command. Defaults Not configured. Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Prior to enabling this command, to place the interface in Layer 2 mode, you - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 660
www.dell.com | support.dell.com Figure 37-3. show vlan Command Example with Stackable VLANs FTOS#show vlan MXL 10/40GbE Switch IO Module vlan-stack protocol-type Define the Stackable VLAN tag protocol identifier (TPID) for the outer VLAN tag (also called the VMAN tag). If you do not configure - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 661
Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage For specific interoperability limitations regarding the S-Tag TPID, refer to the FTOS Configuration Information Guide. Related Commands portmode hybrid vlan-stack trunk Sets a port (physical ports only - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 662
www.dell.com | support.dell.com Example 1 Figure 37-4. Adding a Stackable VLAN Trunk Port to a if-te-10/0)#no shutdown FTOS(conf-if-te-10/0)#portmode hybrid FTOS(conf-if-te-10/0)#switchport FTOS(conf-if-te-10/0)#vlan-stack trunk FTOS(conf-if-te-10/0)#exit FTOS(conf)#interface vlan 10 FTOS(conf - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 663
38 Virtual Router Redundancy Protocol (VRRP) IPv4 VRRP Commands The virtual router redundancy protocol (VRRP) chapter describes the commands: • advertise-interval • authentication-type • clear counters vrrp • debug vrrp • description • disable • hold-time • preempt • priority • show config • show - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 664
.dell.com | support.dell.com Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Dell Force10 text. Defaults Not configured. Command Modes VRRP Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The password - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 665
Modes EXEC Privilege Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module If no options are specified, debug is active on all interfaces and all VRRP groups. description Configure a short text string describing the VRRP group. Syntax description text To - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 666
www.dell.com | support.dell.com disable Disable a VRRP group. Syntax disable To re-enable a disabled VRRP group, use the no disable command. Defaults VRRP is enabled. Command Modes VRRP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage To enable VRRP traffic - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 667
16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information To guarantee that a VRRP group becomes MASTER, configure the VRRP group's message appears. Note: Configuring VRRP priority 255 on an interface on which DHCP Client is enabled is not supported. Virtual Router Redundancy Protocol (VRRP) - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 668
] Parameters verbose (OPTIONAL) Enter the keyword verbose to view all VRRP group configuration information, including defaults. Command Modes VRRP Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 38-1. show config Command Example FTOS(conf-if-vrid - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 669
Example FTOS>Interface Grp Pri Pre State Master addr Virtual addr(s) Description TenGig 10/37 1 100 Y Master 200.200.200.200 200.200.200.201 TenGig10 priority value assigned to the interface. If the track command is configured to track that interface and the interface is disabled, the cost - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 670
dell.com | support.dell.com Figure 38-3. show vrrp Command Example FTOS>show vrrp TenGigabitEthernet 12/3, VRID: 1, Net: 10.1.1.253 State: Master, Priority: 105, Master: 10 Preempt displays TRUE if preempt is configured and FALSE if preempt is not configured. • AdvInt displays the Advertise - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 671
password are listed. This line is displayed if the track command is configured on an interface. Below this line, the following information on the to 254. Default: 10. Defaults cost = 10 Command Modes VRRP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage If - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 672
www.dell.com | support.dell.com virtual-address Configure up to 12 IP addresses of virtual as the interface's primary IP address. Defaults Not configured. Command Modes VRRP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The VRRP group only becomes active - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 673
(0 indicates no delay) Defaults Command Modes 0 INTERFACE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module This command applies to a all the VRRP configured interfaces on a system. When used in conjunction with the vrrp delay minimum CLI, the later - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 674
vrrp-id Parameters vrrp-id Enter a number as the group ID. Range: 1 to 255. Defaults Not configured. Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The VRRP group only becomes active and sends VRRP packets when a virtual IP address - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 675
Commands Offline Diagnostic Commands The offline diagnostics test suite is useful for isolating faults and debugging hardware. While tests are running, the Dell Force10 operating software (FTOS) results are saved as a text file (TestReport-SU-X.txt) in the flash directory. The show file command is - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 676
.dell.com | support.dell.com those components. These diagnostics also perform snake tests using VLAN configurations. You must physically remove the unit from the stack to Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module offline stack-unit Place a stack unit - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 677
History none EXEC Privilege H Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Buffer Tuning Commands The buffer tuning commands are: • buffer (Buffer Profile) • buffer (Configuration) • buffer-profile (Configuration) • buffer-profile (Interface) • show buffer-profile • show buffer - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 678
www.dell.com | support.dell.com queue0 number queue1 number queue2 number queue3 number Enter Mode BUFFER PROFILE Command History H Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands buffer-profile (Configuration) Creates a buffer profile that can be applied to an - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 679
INTERFACE mode. Command History Related Commands H Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module buffer-profile (Configuration) Creates a buffer profile that can be applied to an interface. buffer-profile (Configuration) Create a buffer profile that can be applied to an interface - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 680
dell.com | support.dell.com Usage Information The buffer-profile global command fails if you have already applied a custom buffer-profile on an interface. Similarly, when you configure instructing you to remove the default configuration MXL 10/40GbE Switch IO Module buffer-profile (Configuration - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 681
0 0 test1 4 0 test2 FTOS# Related Commands buffer-profile (Configuration) Creates a buffer profile that can be applied to an interface. History Example none INTERFACE H Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 39-2. show buffer-profile interface Command Example - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 682
www.dell.com | support.dell.com Hardware Commands These commands display information from a hardware sub-component Modes EXEC Privilege Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show hardware stack-unit Displays the data plane or management - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 683
the system-flow counters on the selected port-pipe. Defaults none Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands show hardware stack-unit Displays the data plane or management plane input and output statistics of the - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 684
| support.dell.com Defaults Command Modes Command History stack-unit 0-5 port-set 0-0 none EXEC Privilege Version 8.3.16.1 Enter the keyword stack-unit followed by a numeral from 0 to 5 to select a stack ID. Enter the keyword port-set with a port-pipe number - 0. Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 685
to troubleshoot errors on the selected port-pipe and to give status on why a port is not coming up to register level: counters, details, port-stats [detail], or register Defaults none Command Modes EXEC EXEC Privilege Command History Example 1 Version 8.3.16.1 Introduced on MXL 10/40GbE Switch - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 686
dell.com | support.dell.com In the above example, the "Status" field represents presence of OPTM ports, "Programmed version" field represents loaded firmware 4 Figure 39-6. show hardware stack-unit drops (drop summary for entire switch) Command Example FTOS#show hard stack-unit 0 drops UNIT No: 0 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 687
Example 5 Figure 39-7. show hardware stack-unit drops unit (drop summary per port) Command Example FTOS#show hard stack-unit 0 drops unit 0 PortNumber Ingress Drops IngMac Drops Total Mmu Drops EgMac Drops Egress Drops 1 0 0 0 0 0 2 0 0 0 0 0 3 0 0 0 0 0 4 0 0 0 0 0 FTOS# - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 688
www.dell.com | support.dell.com Example 7 Figure 39-9. show hardware stack-unit port-statistics Command Example FTOS# Tag F GMII 1550 Tag F GMII 1550 Tag F GMII 1550 FTOS# Example 8 Figure 39-10. show hardware stack-unit unit 0 register Command Example FTOS#show hardware stack-unit 0 unit 0 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 689
linkStatus of Front End Port 9 is FALSE The linkStatus of Front End Port 10 is FALSE The linkStatus of Front End Port 11 is FALSE The linkStatus FALSE The linkStatus of Front End Port 37 is FALSE output truncated Example 10 Figure 39-12. show hardware stack-unit per stack unit buffer Command - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 690
www.dell.com | support.dell.com Example 11 Figure 39-13. show hardware stack-unit per port buffer (a Specific Port) Command or QoS option. Defaults none Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 690 | Debugging and Diagnostics - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 691
Example 1 Figure 39-15. show hardware system-flow layer2 counters Command Example FTOS#show hardware system-flow layer2 stack-unit 0 port-set 0 counters EntryId Description #HITS 2048 STP BPDU Redirects 0 2047 LLDP BPDU Redirects 164904 2045 LACP traffic Redirects 0 2044 GVRP - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 692
www.dell.com | support.dell.com Example 2 Figure 39-16. show hardware system-flow layer2 (non-counters) Command Example FTOS#show hardware system-flow layer2 stack-unit 0 port-set 0 FP - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 693
Debugging and Diagnostics | 693 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 694
694 | Debugging and Diagnostics www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 695
isolated (obsolete) 9 destination network administratively prohibited 10 destination host administratively prohibited 11 network unreachable 1 redirect for host 2 redirect for type-of-service and network 3 redirect for type-of-service and host 0 echo request Query Error • Internet Control - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 696
dell.com | support.dell.com Table 40-1. ICMP Messages and Their Definitions Symbol & Type 9 10 11 12 13 14 15 16 17 18 Code Description 0 router advertisement 0 router solicitation time exceeded: 0 time-to-live equals 0 during transit 1 time-to-live equals 0 during reassembly parameter problem - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 697
41 SNMP Traps This chapter lists the traps sent by FTOS. Each trap is listed by the fields Message ID, Trap Type, and Trap Option, and the next is the message(s) associated with the trap. Table 41-1. SNMP Traps and Error Messages Message ID Trap Type COLD_START SNMP %SNMP-5-SNMP_COLD_START: - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 698
www.dell.com | support.dell.com Table 41-1. SNMP Traps and Error Messages (continued) Message ID Trap Type Trap Option RESV NONE NONE N/A CHM_MIN_ALRM_TEMP ENVMON TEMP %CHMGR-2-MINOR_TEMP: Minor alarm: - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 699
Table 41-1. SNMP Traps and Error Messages (continued) Message ID Trap Type Trap Option %DIFFSERV-5-ETS_TRAP_TYPE_MODULE_STATUS_CHANGE: ETS Module status changed to disabled ETS_TRAP_TYPE_ADMIN_MODE_CHANG ETS E NONE %DIFFSERV-5-ETS_TRAP_TYPE_ADMIN_MODE_CHANGE : ETS Admin mode changed to on for - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 700
www.dell.com | support.dell.com Table 41-1. SNMP Traps and Error Messages (continued) Message ID as max-session-limit in system reached FIPS_ACL_INSTALL_FAIL FIPS NONE %FCOE-5-ACL_INSTALL_FAIL: problem in installing ACL entries due to no space or hardware failure CHMGR_ENT_LAST_CHANGE_TIME - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 701
) 389 auto-negotiation 254 Autonomous System. See AS. auto-summary 492 B bandwidth-percentage 468 bandwidth-percentage (policy QoS) 468 Bare Metal Auto-Configuration 143 base VLAN 440 boot, interrupting 81 BPDU 374, 459, 522, 623 Bridge Protocol Data Units, See BPDU. Bridge Protocol Data Units. See - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 702
www.dell.com | support.dell.com LINE 18 MAC ACCESS LIST 18 MULTIPLE SPANNING TREE 20 PREFIX-LIST 19 ROUTE-MAP 18 ROUTER OSPF 20 ROUTER RIP 20 SPANNING TREE 19 clock read-calendar 632 clock set 633 clock summer-time date 634 clock summer-time recurring 635 clock timezone 636 clock update-calendar - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 703
priority 157, 462 dot1p-priority (QoS) 462 download alt-boot-image 25 downstream 647 downstream auto- files supported 22 F fast-convergence OSPF 396 fast-convergence (OSPF) 396 files, number supported on FIB) entries 311 ftp-server enable 47 ftp-server topdir 47 ftp-server username 48 G GARP ( - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 704
www.dell.com | support.dell.com hostname 48 domain-lookup 300 ip domain-name 300 IP DSCP bit 480 ip fib download-igp-only 301 ip ftp password 49 ip ftp source-interface 49 ip ip local-proxy-arp command 440 ip max-frag-count 302 ip name-server 302 ip ospf auth-change-wait-time 397 OSPF 397 ip ospf - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 705
station-move 339 mac-address-table station-move refresh-arp 339 Management interface 244 management route 305 Management static route 305 management unit, MXL Switch member unit, resetting 612 master unit 612 match interface (Route Map) 134 match ip access-group 470 match ip access-group (policy QoS - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 706
www.dell.com | support.dell.com monitor session 434 motd-banner 52 msti (MSTP) 375 MSTP 371 debug spanning-tree mstp 372 mtu 252 MULTIPLE SPANNING TREE 20 Multiple Spanning Tree Protocol 371 see MSTP 371 MXL Switch -only commands reset stack-unit 611, 612 MXL Switch stacking 611 N name (MSTP) 376 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 707
exec 536, 537 privilege level (CONFIGURATION mode) 536 privilege level (LINE -server deadtime 549 radius-server host 549 radius-server key 551 radius-server retransmit 551 radius-server timeout -list ipv4 93 reset stack-unit 611, 612 resetting MXL Switch member unit 612 revision (MSTP) 373, 377 RFC - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 708
www.dell.com | support.dell.com aaa accounting 532 aaa accounting suppress 533 aaa authorization 535 show accounting 533 seq IP ACL (extended) 115 standard IP ACL 100 seq (extended IP ACLs) 115 seq (Extended MAC ACL) 126 seq (IP prefix ACL) 129 seq (standard MAC ACL) 122 seq arp 115 service - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 709
switch -tree mst configuration 378 show 284 show tech-support 25, supported 579 versions supported 579 snmp ifmib ifalias long 582 snmp trap link-status 594 snmp-server community 582 snmp-server contact 584 snmp-server enable traps 584, 585 snmp-server host 588 snmp-server location 590 snmp-server - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 710
dell.com | support.dell Stackable VLAN feature 655 stacking, MXL Switch 611 stack-unit priority 618 sessions supported 52 terminal length 76 terminal monitor 604 TFTP server, copy 671 track ip command 352 Troubleshooting 695, 697, 701 trunk port 440 trust diffserv 487 Type of Service. See TOS. U - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 711
vlan hello-time (PVST+) 459 vlan max-age (PVST+) 460 VLAN types (private VLAN) 439 VLANs ACL support 250 definition 347 IP features not supported 347 vlan-stack access 659 vlan-stack compatible 659 vlan-stack protocol-type 660 vlan-stack trunk 661 VLAN-Stack VLANs Important Points to Remember - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 712
712 | Index www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 713
Index | 713 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 714
714 | Index www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 715
Index | 715 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 716
716 | Index www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 717
Index | 717 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 718
718 | Index www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 719
ufd-disable 645 clock read-calendar 632 clock set 633 clock summer-time date 634 clock summer-time recurring 635 clock timezone 636 clock update-calendar 636 configure 42 continue (Route Map) 132 copy 22 copy flash 22 copy run start 25 copy running-config 22 copy running-config ftp 23 copy - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 720
dell.com | support.dell -recover 648 duplex (10/100 Interfaces) 240 E ecmp-group, LAG link bundle monitoring 241 enable 44 enable xfp-power-updates 44 end 45 exec -delay (STP) 623 FTP debug ftpserver 43 ftp-server enable 47 ftp-server topdir 47 ftp-server username 48 ip ftp password 49 ip ftp source- - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 721
233 ip local-proxy-arp 440 ip max-frag-count 302 ip name-server 302 ip prefix-list 128 ip proxy-arp 303 ip radius source-interface ip ssh rsa-authentication (Config) 561 ip ssh rsa-authentication (EXEC) 561 ip ssh server 562 ip udp-helper udp-port 287 J JumpStart reload type 144 show reload-type - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 722
.dell.com | support.dell size 599 logging kernel-coredump 25 logging kernel-coredump server 26 logging monitor 600 logging on 600 logging source- mstp 377 revision 373, 377 show config 378 show spanning-tree mst configuration 378 show spanning-tree msti 378 spanning-tree 381 spanning-tree msti - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 723
ntp broadcast client 638 ntp disable 639 ntp multicast client 639 ntp server 639 ntp source 640 ntp trusted-key 640 ntp update-calendar 641 show ntp associations 642 show ntp status 643 O offline stack-unit 676 online stack-unit 677 OSPF area default-cost 387 area nssa - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 724
www.dell.com | support.dell.com private-vlan mode 441 protocol gvrp 222 protocol lldp (Configuration) 360 protocol , 464 rate-police 476 rate-shape 477 service-class dynamic dot1p 164, 207, 325, 464 service-policy input 478 service-policy output 478 service-queue 479 show interfaces rate 158, 159, - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 725
seq (Extended IP ACL) 115 service timestamps 55 service-policy-input 478, 485 service-policy-output 478 service-queue 479 set (policy QoS ) 573 sflow enable (Interface) 573 sflow extended-switch enable 574 sflow polling-interval (Global) 574 sflow 259 show interfaces configured 263 show interfaces - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 726
configuration tech-support stack-unit 72 show uplink-state-group 650 show version 33 show vlan 349 show vlan private-vlan 444 show vlan private-vlan mapping 446 shutdown (port, LAG, VLAN) 275 SNMP show snmp 580, 581 show snmp user 581 snmp trap link-status 594 snmp-server community 582 snmp-server - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 727
spanning-tree mstp 382 spanning-tree pvst 456 spanning-tree rstp 527 speed 10/100/1000 Base-T Ethernet Interfaces 275 S-Series-only commands reset stack-unit -flush-standard (MSTP) 383 tdr-cable-test 284 Telnet ip telnet server enable 50 ip telnet source-interface 51 telnet 75 terminal monitor 604 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 728
www.dell.com | support.dell.com write 78 write memory 25 728 | Command Index - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 729
Command Index | 729 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 730
730 | Command Index www.dell.com | support.dell.com - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 731
Command Index | 731 - Dell Force10 MXL Blade | MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 732
732 | Command Index www.dell.com | support.dell.com
Dell Force10 FTOS Command
Line Reference Guide for the
MXL 10/40GbE Switch IO
Module
Publication Date: March 2013